##############################################################################
##############################################################################
###
### Running command:
###
###   D:\biocbuild\bbs-3.15-bioc\R\bin\R.exe CMD check --no-multiarch --install=check:ggcyto.install-out.txt --library=D:\biocbuild\bbs-3.15-bioc\R\library --no-vignettes --timings ggcyto_1.23.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory 'D:/biocbuild/bbs-3.15-bioc/meat/ggcyto.Rcheck'
* using R Under development (unstable) (2021-11-21 r81221)
* using platform: x86_64-w64-mingw32 (64-bit)
* using session charset: ISO8859-1
* using option '--no-vignettes'
* checking for file 'ggcyto/DESCRIPTION' ... OK
* checking extension type ... Package
* this is package 'ggcyto' version '1.23.0'
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .travis.yml
These were most likely included in error. See section 'Package
structure' in the 'Writing R Extensions' manual.
* checking for portable file names ... NOTE
Found the following non-portable file path:
  ggcyto/docs/articles/advanced/ggplot.flowSet.overlay_files/accessible-code-block-0.0.1/empty-anchor.js

Tarballs are only required to store paths of up to 100 bytes and cannot
store those of more than 256 bytes, with restrictions including to 100
bytes for the final component.
See section 'Package structure' in the 'Writing R Extensions' manual.
* checking whether package 'ggcyto' can be installed ... OK
* checking installed package size ... OK
* checking package directory ... OK
* checking 'build' directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking R files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking dependencies in R code ... NOTE
Namespace in Imports field not imported from: 'scales'
  All declared Imports should be used.
':::' call which should be '::': 'flowWorkspace:::gh_pop_is_negated'
  See the note in ?`:::` about the use of this operator.
Unexported objects imported by ':::' calls:
  'flowWorkspace:::.mergeGates' 'flowWorkspace:::compact'
  'flowWorkspace:::fix_y_axis' 'ggplot2:::+.gg' 'ggplot2:::add_group'
  'ggplot2:::as_gg_data_frame' 'ggplot2:::check_aesthetics'
  'ggplot2:::hex_binwidth' 'ggplot2:::is.waive'
  'ggplot2:::is_calculated_aes' 'ggplot2:::make_labels'
  'ggplot2:::make_scale' 'ggplot2:::plot_clone'
  'ggplot2:::print.ggplot' 'ggplot2:::scales_add_defaults'
  'ggplot2:::scales_list'
  See the note in ?`:::` about the use of this operator.
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
.fs2dt: no visible binding for global variable 'name'
add_ggcyto: no visible binding for global variable 'name'
add_ggcyto: no visible global function definition for 'modifyList'
add_ggcyto: no visible binding for global variable 'axis'
add_ggcyto: no visible binding for global variable 'desc'
add_par: no visible global function definition for 'modifyList'
as.ggplot: no visible binding for global variable 'axis'
as.ggplot: no visible binding for global variable 'name'
as.ggplot : <anonymous>: no visible binding for global variable 'axis'
as.ggplot : <anonymous>: no visible binding for global variable 'name'
as.ggplot: no visible binding for global variable 'count'
as.ggplot: no visible global function definition for 'densCols'
as.ggplot: no visible global function definition for 'colorRampPalette'
as.ggplot: no visible binding for global variable 'density'
autoplot.GatingHierarchy : <anonymous>: no visible global function
  definition for 'gray'
autoplot.GatingSetList: no visible global function definition for
  'getS3method'
autoplot.ncdfFlowList: no visible global function definition for
  'getS3method'
density_fr_all : <anonymous>: no visible global function definition for
  'gray'
fortify.GatingSetList: no visible global function definition for
  'getS3method'
fortify.ncdfFlowList: no visible global function definition for
  'getS3method'
fortify_fs.GatingSetList: no visible global function definition for
  'getS3method'
getFlowFrame.GatingSetList: no visible global function definition for
  'getS3method'
getFlowFrame.ncdfFlowList: no visible global function definition for
  'getS3method'
ggcyto.GatingSetList: no visible global function definition for
  'getS3method'
ggcyto.flowSet: no visible binding for global variable 'name'
ggcyto.flowSet: no visible binding for global variable 'axis'
ggcyto.ncdfFlowList: no visible global function definition for
  'getS3method'
ggcyto_arrange: no visible binding for global variable 'name'
stat_position.filter: no visible global function definition for
  'setNames'
Undefined global functions or variables:
  axis colorRampPalette count densCols density desc getS3method gray
  modifyList name setNames
Consider adding
  importFrom("grDevices", "colorRampPalette", "densCols", "gray")
  importFrom("graphics", "axis")
  importFrom("stats", "density", "setNames")
  importFrom("utils", "getS3method", "modifyList")
to your NAMESPACE file.
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking files in 'vignettes' ... OK
* checking examples ... OK
Examples with CPU (user + system) or elapsed time > 5s
           user system elapsed
autoplot   7.68   0.59    8.28
ggcyto     7.44   0.54    8.07
ggcyto_add 6.64   0.51    7.16
* checking for unstated dependencies in 'tests' ... OK
* checking tests ...
  Running 'testthat.R'
 OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in 'inst/doc' ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 4 NOTEs
See
  'D:/biocbuild/bbs-3.15-bioc/meat/ggcyto.Rcheck/00check.log'
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   D:\biocbuild\bbs-3.15-bioc\R\bin\R.exe CMD INSTALL ggcyto
###
##############################################################################
##############################################################################


* installing to library 'D:/biocbuild/bbs-3.15-bioc/R/library'
* installing *source* package 'ggcyto' ...
** using staged installation
** R
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
  converting help for package 'ggcyto'
    finding HTML links ... done
    as.ggplot                               html  
    autoplot                                html  
    finding level-2 HTML links ... done

    axis_x_inverse_trans                    html  
    compute_stats                           html  
    flowCore_asinht_trans                   html  
    fortify.ellipsoidGate                   html  
    fortify.filterList                      html  
    fortify.flowSet                         html  
    fortify.polygonGate                     html  
    fortify.rectangleGate                   html  
    fortify_fs                              html  
    gate_null                               html  
    geom_gate                               html  
    geom_hvline                             html  
    geom_overlay                            html  
    geom_stats                              html  
    getFlowFrame                            html  
    ggcyto                                  html  
    ggcyto_add                              html  
    ggcyto_arrange                          html  
    ggcyto_par_default                      html  
    ggcyto_par_set                          html  
    is.ggcyto                               html  
    is.ggcyto_flowSet                       html  
    is.ggcyto_par                           html  
    labs_cyto                               html  
    marginalFilter                          html  
    merge.quad.gates                        html  
    print.ggcyto                            html  
    print.ggcyto_GatingLayout               html  
    replace_data                            html  
    scale_x_flowCore_fasinh                 html  
    scale_x_logicle                         html  
    scales_flowjo_biexp                     html  
REDIRECT:topic	 Previous alias or file overwritten by alias: D:/biocbuild/bbs-3.15-bioc/R/library/00LOCK-ggcyto/00new/ggcyto/help/scale_x_flowJo_biexp.html
REDIRECT:topic	 Previous alias or file overwritten by alias: D:/biocbuild/bbs-3.15-bioc/R/library/00LOCK-ggcyto/00new/ggcyto/help/scale_y_flowJo_biexp.html
    scales_flowjo_fasinh                    html  
REDIRECT:topic	 Previous alias or file overwritten by alias: D:/biocbuild/bbs-3.15-bioc/R/library/00LOCK-ggcyto/00new/ggcyto/help/scale_x_flowJo_fasinh.html
REDIRECT:topic	 Previous alias or file overwritten by alias: D:/biocbuild/bbs-3.15-bioc/R/library/00LOCK-ggcyto/00new/ggcyto/help/scale_y_flowJo_fasinh.html
    stat_position                           html  
    stats_null                              html  
    transform-gate                          html  
*** copying figures
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (ggcyto)
Making 'packages.html' ... done

R Under development (unstable) (2021-11-21 r81221) -- "Unsuffered Consequences"
Copyright (C) 2021 The R Foundation for Statistical Computing
Platform: x86_64-w64-mingw32/x64 (64-bit)

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> library(testthat)
> library(ggcyto)
Loading required package: ggplot2
Loading required package: flowCore
Loading required package: ncdfFlow
Loading required package: RcppArmadillo
Loading required package: BH
Loading required package: flowWorkspace
As part of improvements to flowWorkspace, some behavior of
GatingSet objects has changed. For details, please read the section
titled "The cytoframe and cytoset classes" in the package vignette:

  vignette("flowWorkspace-Introduction", "flowWorkspace")
> library(vdiffr)
> 
> test_check("ggcyto")
Coordinate system already present. Adding new coordinate system, which will replace the existing one.
`stat_bin()` using `bins = 30`. Pick better value with `binwidth`.
[ FAIL 0 | WARN 0 | SKIP 6 | PASS 1 ]

== Skipped tests ===============================================================
* On CRAN (6)

[ FAIL 0 | WARN 0 | SKIP 6 | PASS 1 ]
There were 36 warnings (use warnings() to see them)
> 
> proc.time()
   user  system elapsed 
   7.51    0.98    8.67