##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.14-bioc/R/bin/R CMD check --install=check:MACSr.install-out.txt --library=/home/biocbuild/bbs-3.14-bioc/R/library --no-vignettes --timings MACSr_1.2.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/home/biocbuild/bbs-3.14-bioc/meat/MACSr.Rcheck’
* using R version 4.1.3 (2022-03-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using option ‘--no-vignettes’
* checking for file ‘MACSr/DESCRIPTION’ ... OK
* this is package ‘MACSr’ version ‘1.2.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .BBSoptions
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘MACSr’ can be installed ... NOTE
Found the following notes/warnings:
  Non-staged installation was used
See ‘/home/biocbuild/bbs-3.14-bioc/meat/MACSr.Rcheck/00install.out’ for details.
* checking installed package size ... OK
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking R files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking dependencies in R code ... OK
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... OK
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking line endings in shell scripts ... OK
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
Examples with CPU (user + system) or elapsed time > 5s
               user system elapsed
bdgbroadcall 10.023  0.669  11.440
bdgdiff       8.221  0.248   8.857
cmbreps       7.808  0.325   8.624
refinepeak    7.977  0.136   8.617
bdgcmp        6.971  0.252   7.666
callpeak      6.756  0.236   7.462
bdgopt        6.709  0.144   7.398
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘testthat.R’
 OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 2 NOTEs
See
  ‘/home/biocbuild/bbs-3.14-bioc/meat/MACSr.Rcheck/00check.log’
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.14-bioc/R/bin/R CMD INSTALL MACSr
###
##############################################################################
##############################################################################


* installing to library ‘/home/biocbuild/bbs-3.14-bioc/R/library’
* installing *source* package ‘MACSr’ ...
** using non-staged installation via StagedInstall field
** R
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded
* DONE (MACSr)

R version 4.1.3 (2022-03-10) -- "One Push-Up"
Copyright (C) 2022 The R Foundation for Statistical Computing
Platform: x86_64-pc-linux-gnu (64-bit)

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> library(testthat)
> library(MACSr)
> 
> test_check("MACSr")
INFO  @ Tue, 12 Apr 2022 08:05:46: 
# Command line: 
# ARGUMENTS LIST:
# name = run_callpeak_narrow0
# format = BED
# ChIP-seq file = ['/home/biocbuild/.cache/R/ExperimentHub/3d73832332a552_4601']
# control file = ['/home/biocbuild/.cache/R/ExperimentHub/3d73831c5d77a3_4606']
# effective genome size = 5.20e+07
# band width = 300
# model fold = [5.0, 50.0]
# qvalue cutoff = 5.00e-02
# The maximum gap between significant sites is assigned as the read length/tag size.
# The minimum length of peaks is assigned as the predicted fragment length "d".
# Larger dataset will be scaled towards smaller dataset.
# Range for calculating regional lambda is: 1000 bps and 10000 bps
# Broad region calling is off
# Additional cutoff on fold-enrichment is: 0.10
# Paired-End mode is off
 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1 read tag files... 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1 read treatment tags... 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1.2 read input tags... 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1 tag size is determined as 101 bps 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1 tag size = 101.0 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1  total tags in treatment: 49622 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1 user defined the maximum tags... 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1  tags after filtering in treatment: 48047 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1  Redundant rate of treatment: 0.03 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1  total tags in control: 50837 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1 user defined the maximum tags... 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1  tags after filtering in control: 50783 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1  Redundant rate of control: 0.00 
INFO  @ Tue, 12 Apr 2022 08:05:46: #1 finished! 
INFO  @ Tue, 12 Apr 2022 08:05:46: #2 Build Peak Model... 
INFO  @ Tue, 12 Apr 2022 08:05:46: #2 looking for paired plus/minus strand peaks... 
INFO  @ Tue, 12 Apr 2022 08:05:46: #2 Total number of paired peaks: 469 
INFO  @ Tue, 12 Apr 2022 08:05:46: #2 Model building with cross-correlation: Done 
INFO  @ Tue, 12 Apr 2022 08:05:46: #2 finished! 
INFO  @ Tue, 12 Apr 2022 08:05:46: #2 predicted fragment length is 228 bps 
INFO  @ Tue, 12 Apr 2022 08:05:46: #2 alternative fragment length(s) may be 228 bps 
INFO  @ Tue, 12 Apr 2022 08:05:46: #2.2 Generate R script for model : /tmp/Rtmpq1oifN/run_callpeak_narrow0_model.r 
INFO  @ Tue, 12 Apr 2022 08:05:46: #3 Call peaks... 
INFO  @ Tue, 12 Apr 2022 08:05:46: #3 Pre-compute pvalue-qvalue table... 
INFO  @ Tue, 12 Apr 2022 08:05:46: #3 Cutoff vs peaks called will be analyzed! 
INFO  @ Tue, 12 Apr 2022 08:05:47: #3 Analysis of cutoff vs num of peaks or total length has been saved in b'/tmp/Rtmpq1oifN/run_callpeak_narrow0_cutoff_analysis.txt' 
INFO  @ Tue, 12 Apr 2022 08:05:47: #3 In the peak calling step, the following will be performed simultaneously: 
INFO  @ Tue, 12 Apr 2022 08:05:47: #3   Write bedGraph files for treatment pileup (after scaling if necessary)... run_callpeak_narrow0_treat_pileup.bdg 
INFO  @ Tue, 12 Apr 2022 08:05:47: #3   Write bedGraph files for control lambda (after scaling if necessary)... run_callpeak_narrow0_control_lambda.bdg 
INFO  @ Tue, 12 Apr 2022 08:05:47: #3   Pileup will be based on sequencing depth in treatment. 
INFO  @ Tue, 12 Apr 2022 08:05:47: #3 Call peaks for each chromosome... 
INFO  @ Tue, 12 Apr 2022 08:05:47: #4 Write output xls file... /tmp/Rtmpq1oifN/run_callpeak_narrow0_peaks.xls 
INFO  @ Tue, 12 Apr 2022 08:05:47: #4 Write peak in narrowPeak format file... /tmp/Rtmpq1oifN/run_callpeak_narrow0_peaks.narrowPeak 
INFO  @ Tue, 12 Apr 2022 08:05:47: #4 Write summits bed file... /tmp/Rtmpq1oifN/run_callpeak_narrow0_summits.bed 
INFO  @ Tue, 12 Apr 2022 08:05:47: Done! 
[ FAIL 0 | WARN 0 | SKIP 0 | PASS 14 ]
> 
> proc.time()
   user  system elapsed 
 39.018   2.500  42.561