# ---------------------------------------------------------------------------
#    Configure.in for KOSHER DILL - Disk space management utility
# ---------------------------------------------------------------------------

#!/bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf.
# Copyright (C) 1991, 1992, 1993 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

# Usage: configure [--srcdir=DIR] [--host=HOST] [--gas] [--nfp]
#        [--prefix=PREFIX] [--exec-prefix=PREFIX] [--with-PACKAGE[=VALUE]]
# Ignores all args except --srcdir, --prefix, --exec-prefix, and
# --with-PACKAGE[=VALUE] unless this script has special code to handle it.

for arg
do
  # Handle --exec-prefix with a space before the argument.
  if test x$next_exec_prefix = xyes; then exec_prefix=$arg; next_exec_prefix=
  # Handle --host with a space before the argument.
  elif test x$next_host = xyes; then next_host=
  # Handle --prefix with a space before the argument.
  elif test x$next_prefix = xyes; then prefix=$arg; next_prefix=
  # Handle --srcdir with a space before the argument.
  elif test x$next_srcdir = xyes; then srcdir=$arg; next_srcdir=
  else
    case $arg in
     # For backward compatibility, recognize -exec-prefix and --exec_prefix.
     -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* | --exec=* | --exe=* | --ex=* | --e=*)
	exec_prefix=`echo $arg | sed 's/[-a-z_]*=//'` ;;
     -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- | --exec | --exe | --ex | --e)
	next_exec_prefix=yes ;;

     -gas | --gas | --ga | --g) ;;

     -host=* | --host=* | --hos=* | --ho=* | --h=*) ;;
     -host | --host | --hos | --ho | --h)
	next_host=yes ;;

     -nfp | --nfp | --nf) ;;

     -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
	prefix=`echo $arg | sed 's/[-a-z_]*=//'` ;;
     -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
	next_prefix=yes ;;

     -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=* | --s=*)
	srcdir=`echo $arg | sed 's/[-a-z_]*=//'` ;;
     -srcdir | --srcdir | --srcdi | --srcd | --src | --sr | --s)
	next_srcdir=yes ;;

     -with-* | --with-*)
       package=`echo $arg|sed -e 's/-*with-//' -e 's/=.*//'`
       # Reject names that aren't valid shell variable names.
       if test -n "`echo $package| sed 's/[-a-zA-Z0-9_]//g'`"; then
         echo "configure: $package: invalid package name" >&2; exit 1
       fi
       package=`echo $package| sed 's/-/_/g'`
       case "$arg" in
         *=*) val="`echo $arg|sed 's/[^=]*=//'`" ;;
         *) val=1 ;;
       esac
       eval "with_$package='$val'" ;;

     -v | -verbose | --verbose | --verbos | --verbo | --verb | --ver | --ve | --v)
       verbose=yes ;;

     *) ;;
    esac
  fi
done

trap 'rm -fr conftest* confdefs* core; exit 1' 1 3 15
trap 'rm -f confdefs*' 0

# NLS nuisances.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = 'set' ; then LC_ALL=C; export LC_ALL; fi
if test "${LANG+set}"   = 'set' ; then LANG=C;   export LANG;   fi

rm -f conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h
compile='${CC-cc} $CFLAGS conftest.c -o conftest $LIBS >/dev/null 2>&1'

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
unique_file=

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  srcdirdefaulted=yes
  # Try the directory containing this script, then `..'.
  prog=$0
  confdir=`echo $prog|sed 's%/[^/][^/]*$%%'`
  test "X$confdir" = "X$prog" && confdir=.
  srcdir=$confdir
  if test ! -r $srcdir/$unique_file; then
    srcdir=..
  fi
fi
if test ! -r $srcdir/$unique_file; then
  if test x$srcdirdefaulted = xyes; then
    echo "configure: Can not find sources in \`${confdir}' or \`..'." 1>&2
  else
    echo "configure: Can not find sources in \`${srcdir}'." 1>&2
  fi
  exit 1
fi
# Preserve a srcdir of `.' to avoid automounter screwups with pwd.
# But we can't avoid them for `..', to make subdirectories work.
case $srcdir in
  .|/*|~*) ;;
  *) srcdir=`cd $srcdir; pwd` ;; # Make relative path absolute.
esac


# Save the original args to write them into config.status later.
configure_args="$*"


# ---------------------------------------------------------------------------
# 	Check for existence of install programs
# ---------------------------------------------------------------------------

# Make sure to not get the incompatible SysV /etc/install and
# /usr/sbin/install, which might be in PATH before a BSD-like install,
# or the SunOS /usr/etc/install directory, or the AIX /bin/install,
# or the AFS install, which mishandles nonexistent args, or
# /usr/ucb/install on SVR4, which tries to use the nonexistent group
# `staff'.  On most BSDish systems install is in /usr/bin, not /usr/ucb
# anyway.  Sigh.
if test "z${INSTALL}" = "z" ; then
  echo checking for install
  IFS="${IFS= 	}"; saveifs="$IFS"; IFS="${IFS}:"
  for dir in $PATH; do
    test -z "$dir" && dir=.
    case $dir in
    /etc|/usr/sbin|/usr/etc|/usr/afsws/bin|/usr/ucb) ;;
    *)
      if test -f $dir/installbsd; then
	INSTALL="$dir/installbsd -c" # OSF1
	INSTALL_PROGRAM='$(INSTALL)'
	INSTALL_DATA='$(INSTALL) -m 644'
	break
      fi
      if test -f $dir/install; then
	if grep dspmsg $dir/install >/dev/null 2>&1; then
	  : # AIX
	else
	  INSTALL="$dir/install -c"
	  INSTALL_PROGRAM='$(INSTALL)'
	  INSTALL_DATA='$(INSTALL) -m 644'
	  break
	fi
      fi
      ;;
    esac
  done
  IFS="$saveifs"
fi
INSTALL=${INSTALL-cp}
test -n "$verbose" && echo "	setting INSTALL to $INSTALL"
INSTALL_PROGRAM=${INSTALL_PROGRAM-'$(INSTALL)'}
test -n "$verbose" && echo "	setting INSTALL_PROGRAM to $INSTALL_PROGRAM"
INSTALL_DATA=${INSTALL_DATA-'$(INSTALL)'}
test -n "$verbose" && echo "	setting INSTALL_DATA to $INSTALL_DATA"


# -----------------------------------------------------------------------
#
# 	Set PWD variable if vendor's /bin/sh doesn't
#
# -----------------------------------------------------------------------
PWD=`pwd`

# ---------------------------------------------------------------------------
# 	Installation path for scripts and help files
# ---------------------------------------------------------------------------

echo "Where do you want to install the "scripts" and "Help" directories?"
read KOSHERDILL_LIBRARY
if test -z "$KOSHERDILL_LIBRARY" ; then
    KOSHERDILL_LIBRARY=$PWD
fi
 

# ---------------------------------------------------------------------------
# 	Installation path for shell script
# ---------------------------------------------------------------------------

echo "Where do you want to install the kosherdill executable?"
read KOSHERDILL_PROGRAM
if test -z "$KOSHERDILL_PROGRAM" ; then
    KOSHERDILL_PROGRAM=	$PWD
fi
 

# ---------------------------------------------------------------------------
# 	BLT wish 
# ---------------------------------------------------------------------------

echo "Which wish contains BLT?"
read BLT_WISH
if test -z "$BLT_WISH" ; then
    BLT_WISH="$PWD/../../blt_wish"
fi
 

echo "setting KOSHERDILL_LIBRARY to "
echo "  \"$KOSHERDILL_LIBRARY\""
echo "setting KOSHERDILL_PROGRAM to "
echo "  \"$KOSHERDILL_PROGRAM\""
echo "setting BLT_WISH to "
echo "  \"$BLT_WISH\""

# ---------------------------------------------------------------------------
# 	Generate only the Makefile
# ---------------------------------------------------------------------------
# Set default prefixes.
if test -n "$prefix"; then
  test -z "$exec_prefix" && exec_prefix='${prefix}'
  prsub="s%^prefix\\([ 	]*\\)=\\([ 	]*\\).*$%prefix\\1=\\2$prefix%"
fi
if test -n "$exec_prefix"; then
  prsub="$prsub
s%^exec_prefix\\([ 	]*\\)=\\([ 	]*\\).*$%exec_prefix\\1=\\2$exec_prefix%"
fi
# Quote sed substitution magic chars in DEFS.
cat >conftest.def <<EOF
$DEFS
EOF
escape_ampersand_and_backslash='s%[&\\]%\\&%g'
DEFS=`sed "$escape_ampersand_and_backslash" <conftest.def`
rm -f conftest.def
# Substitute for predefined variables.

trap 'rm -f config.status; exit 1' 1 3 15
echo creating config.status
rm -f config.status
cat > config.status <<EOF
#!/bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $configure_args

for arg
do
  case "\$arg" in
    -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo running \${CONFIG_SHELL-/bin/sh} $0 $configure_args
    exec \${CONFIG_SHELL-/bin/sh} $0 $configure_args ;;
    *) echo "Usage: config.status --recheck" 2>&1; exit 1 ;;
  esac
done

trap 'rm -f Makefile; exit 1' 1 3 15
INSTALL='$INSTALL'
INSTALL_PROGRAM='$INSTALL_PROGRAM'
INSTALL_DATA='$INSTALL_DATA'
KOSHERDILL_LIBRARY='$KOSHERDILL_LIBRARY'
KOSHERDILL_PROGRAM='$KOSHERDILL_PROGRAM'
BLT_WISH='$BLT_WISH'
LIBS='$LIBS'
srcdir='$srcdir'
DEFS='$DEFS'
prefix='$prefix'
exec_prefix='$exec_prefix'
prsub='$prsub'
extrasub='$extrasub'
EOF
cat >> config.status <<\EOF

top_srcdir=$srcdir

CONFIG_FILES=${CONFIG_FILES-"Makefile"}
for file in .. ${CONFIG_FILES}; do if test "x$file" != x..; then
  srcdir=$top_srcdir
  # Remove last slash and all that follows it.  Not all systems have dirname.
  dir=`echo $file|sed 's%/[^/][^/]*$%%'`
  if test "$dir" != "$file"; then
    test "$top_srcdir" != . && srcdir=$top_srcdir/$dir
    test ! -d $dir && mkdir $dir
  fi
  echo creating $file
  rm -f $file
  echo "# Generated automatically from `echo $file|sed 's|.*/||'`.in by configure." > $file
  sed -e "
$prsub
$extrasub
s%@INSTALL@%$INSTALL%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@KOSHERDILL_LIBRARY@%$KOSHERDILL_LIBRARY%g
s%@KOSHERDILL_PROGRAM@%$KOSHERDILL_PROGRAM%g
s%@BLT_WISH@%$BLT_WISH%g
s%@LIBS@%$LIBS%g
s%@srcdir@%$srcdir%g
s%@DEFS@%$DEFS%
" $top_srcdir/${file}.in >> $file
fi; done


exit 0
EOF
chmod +x config.status
${CONFIG_SHELL-/bin/sh} config.status