Newsgroups: comp.unix.solaris,comp.sys.sun.misc,comp.sys.sun.admin,alt.sys.sun,bln.comp.sun,comp.publish.cdrom.software,de.comp.periph.cdrom,alt.cd-rom,alt.os.linux,comp.os.linux.misc,de.comp.os.linux.misc,maus.os.linux,comp.unix.bsd.freebsd.misc,comp.unix.bsd.netbsd.misc,comp.unix.bsd.openbsd.misc,comp.sys.hp.apps,comp.sys.hp.hpux,comp.sys.hp.misc,comp.sys.sgi.admin,comp.sys.sgi.apps,comp.sys.sgi.misc,comp.unix.aix
Subject: cdrecord 1.6 has been released
Keywords: CD-R CD-RW CDRecord CDwrite SunOS Solaris Linux SGI IRIX FreeBSD NetBSD OpenBSD HP-UX

This is Version 1.6 of cdrecord

Cdrecord allows you to create CD's on a CD-Recorder.
Cdrecord is available with GPL.
Cdrecord runs on:

SunOS 4.1.3 or later:	sparc.
Solaris 2.3 or later:	sparc and x86.
Linux:			x86 sparc alpha and ppc.
NetBSD/FreeBSD/OpenBSD:	x86 sparc
SGI IRIX:		mips
HP-UX:			hppa
AIX:			rs6000

NEW features of cdrecord-1.6 (shortened):

-	Added FIFO (ring buffer) code as a mixture from the fifo code
	from star and a proposal from Finn Arne Gangstad <finnag@guardian.no>
	This allows to use even NFS mounted disk images.
-	CD blank manufacturer decoder that reads information from ATIP
	(not all drives allow you to do a read ATIP)
-	Check the available space on the media
-	Drive support enhanced for a lot of new more drives.
-	ATAPI support
-	AIX supppot
-	Apple Rhapsody support (no source included)
-	Support for .wav and .au files
-	Better SCSI error printing
-	Use real time scheduler on Linux and HP-UX too.
-	Use mlockall() on Linux too.

I am interested to hear if someone is interested in a kernel based
filesystem for Solaris that uses packet writing on the CD-Recorder.
The filesystem will create a single session CD that may be finally converted
to a hybrid filesystem that allows to be read as 
ISO-9660 with Rock Ridge extensions too.
Please mail suggestions to: wofs@schily.isdn.cs.tu-berlin.de

The cdrecord distribution contains a SCSI user level transport library.
The SCSI library is suitable to talk to any SCSI device without having
a special driver for it.
Cdrecord may be easily ported to any system that has a 
SCSI device driver similar to the scg driver.

The SCSI transport library has been taken from the sformat program.
Sformat is the first SCSI disk formatting/analyzing/repairing that runs on
SunOS/Solaris. The first release of sformat has been made for SunOS 3.0 in 1986
(two years before Sun introduced their format utility). Sformat source
including 12 years of competence in SCSI disk handling is available
on:
	ftp://ftp.fokus.gmd.de/pub/unix/sformat

On SunOS/Solaris:
You *need* the SCSI general driver 'scg' in order to run cdrecord.

SunOS 4.1.3 only:
The 'scg' driver is Copyright 1986-1995 Jörg Schilling,
it is supplied binary in a loadable format.
There is no future support, there is no non loadable support.

Solaris only:
The 'scg' driver is Copyright 1986-1995 Jörg Schilling,
it is supplied binary in pkgadd(1m) format and is tested 
on Solaris 2.3, Solaris 2.4 & Solaris 2.5 (sparc).

Solaris only:
It is _nice to have_ the 'fbk' driver to mount files that contain 
images of file systems. Fbk means File simulates Block Device.
It is supplied binary in pkgadd(1m) format and is tested
on Solaris 2.3, Solaris 2.4 & Solaris 2.5 (sparc).

cdrecord compiles on SunOS, but you will need a specific scg driver for
SunOS in this case.

Cdrecord has been implemented with a Philips CDD 521.
Cdrecord now is maintained with the following drives:

	COMPRO/Matsushita/Panasonic CW-7502
	Philips CDD-2000
	TEAC CD-R55S
	Yamaha CDR-400

It should run also on:

	All SCSI-3/mmc compliant drives
	All ATAPI/mmc compliant drives

	COMPRO CW-7502
	Dysan CR-622 ???? See Wearnes 622
	Dysan CR-1622
	DynaTec CDM-240J (see Pinnacle RCD-4x4)
	DynaTec CDM-240  (use cdrecord driver=yamaha_cdr100 and report inquiry)
	DynaTec CDM-400  (use cdrecord driver=yamaha_cdr100 and report inquiry)
	Grundig CDR-100
	Hewlett Packard 4020i
	Hewlett Packard 6020i
	HP C4324/C4325 (HP SureStore 4020i/6020i)
	HP 7100
	HP 7110
	Hi-Val CD-R (see Pinnacle RCD-4x4)
	JVC XR-W2001 (uses TEAC code - see below - audio not working)
	JVC XR-W2010 (uses TEAC code - see below - audio not working)
	JVC XR-W2020 (uses TEAC code - see below - audio not working)
	Kodak PCD-200 or Kodak PCD-200 Plus
	Kodak PCD-225
	Kodak PCD-240
	Kodak PCD-600 (not tested)
	Matsushita CW-7502
	Memorex CR-622 ???? See Wearnes 622
	Memorex CR-1622	
	Microboards PlayWrite 2000 (use cdrecord driver=sony_cdu924 and report inquiry)
	Microboards PlayWrite 4000 (use cdrecord driver=yamaha_cdr100 and report inquiry)
	Microboards PlayWrite 4001RW
	MicroNet MasterCD Plus 4x4 (use cdrecord driver=yamaha_cdr100 and report inquiry)
	MicroNet MasterCD Plus 4x6
	Mitsumi CR-2401-TS (not tested)
	Mitsumi CR-2600-TE
	Olympus CDS615E
	Olympus CDS620E (use cdrecord driver=sony_cdu924   and report inquiry)
	Olympus CD-R2x6 (use cdrecord driver=sony_cdu924   and report inquiry)
	Optima Dis Kovery 650 CD-R (use cdrecord driver=sony_cdu924   and report inquiry)
	OTI CDRW 965
	Panasonic CW-7502
	Philips CDD 521 (CDD521/02  Revision: 2.06 has bad firmware - seems not to work)
	Philips CDD 521 (upgraded units only: ID: CDD521/10  Revision: 2.07)
	Philips CDD 522
	Philips CDD 2000
	Philips CDD 2600
	Philips CDD 3600
	Philips CDD 3610
	Philips Omniwriter 26
	Philips Omniwriter 26A
	Pinnacle Micro RCD-1000 (see TEAC/JVC): Need to upgrade firmware to 2.35
	Pinnacle Micro RCD-5020 (see TEAC/JVC - audio not working)
	Pinnacle Micro RCD-5040 (see TEAC/JVC - audio not working)
	Pinnacle Micro RCD-4x4
	Pioneer DW-S114X
	Plasmon CDR 4220 (not tested)
	Plasmon RF-4100
	Plasmon RF-4102
	Plasmon CDR 4400 (use cdrecord driver=yamaha_cdr100 and report inquiry)
	Plasmon CDR 480
	Plextor PX-R24CS (use cdrecord driver=ricoh_ro1420c and report inquiry)
	Plextor PX-R412C
	Procom PCDR 4 (use cdrecord driver=yamaha_cdr100 and report inquiry)
	Ricoh RO-1420C
	Ricoh MP-6200
	Ricoh MP-6200I
	Ricoh MP-6201
	Smart & Friendly CD-R1002 (use cdrecord driver=sony_cdu924   and report inquiry)
	Smart & Friendly CD-R1004 (use cdrecord driver=yamaha_cdr100 and report inquiry)
	Smart & Friendly CD-R2004 (use cdrecord driver=sony_cdu924   and report inquiry)
	Smart & Friendly CD-R2006 PLUS
	Smart & Friendly CD-R2006 PRO
	Smart & Friendly CD-R4000 (use cdrecord driver=yamaha_cdr100 and report inquiry)
	Smart & Friendly CD-R4006
	Smart & Friendly CD-R4012
	Smart & Friendly CD-RW226
	Sony CDU920S
	Sony CDU924S
	Sony CDU926S
	Sony CDU940S
	TEAC CD-R50S
	TEAC CD-R55S
	Taiyo Yuden CD-WO EW-50
	Traxdata CDR-4120
	Traxdata CDRW-4260
	Turtle Beach 2040R (use cdrecord driver=ricoh_ro1420c and report inquiry)
	Wearnes CD-R622
	Wearnes CD-R632P
	Yamaha CDR-100
	Yamaha CDR-102
	Yamaha CDR-200
	Yamaha CDR-400(Firmware revision 1.0d and up otherwise upgrade)
	Yamaha CDR-401
	Yamaha CRW-4001
	Yamaha CRW-2260
	Yamaha CRW-4260

Multi-session has not been tested with the Plasmon RF-4100

All companies that support me with SCSI command reference manuals and drives
will get (continued) support in the following releases.

The following drives will never be supported by cdrecord because they are too old:

	JVC XR-W1001
	Pinnacle Micro RCD-202
	Ricoh RS-9200CD

The following dries are curently not supported because I don't get specs:
(some of them may partially work: see above)

	Creative Labs CDR 4210
	JVC XR-W2001
	JVC XR-W2010
	JVC XR-W2020
	Panasonic CW-7501
	Pinnacle Micro RCD-1000
	Pinnacle Micro RCD-5020
	Pinnacle Micro RCD-5040
	Plasmon CDR-4240
	Ricoh RS-1060C
	Sony CDU-928E does not work, it violates the ATAPI specs
	Sony CDW-900E
	

All companies that support me with SCSI command reference manuals and drives
will get (continued) support in the following releases.

To install get:

	cdrecord-1.6.tar.gz	The cdrecord distribution.

	Solaris only:

	SCHILYscg.sparc.tar.Z	The scg driver in pkgadd format (sparc).
	SCHILYfbk.sparc.tar.Z	The fbk driver in pkgadd format (sparc).
	SCHILYscg.i386.tar.Z	The scg driver in pkgadd format (x86).
	SCHILYfbk.i386.tar.Z	The fbk driver in pkgadd format (x86).

NOTE:	These tar archives are 100% ansi compatible. Solaris 2.x tar and GNU
	tar may get some minor trouble.

WARNING: Do not use 'mc' to extract the tar file!
	All mc versions before 4.0.14 cannot extract symbolic links correctly.

The files are located on:

ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ ...
ftp://ftp.fokus.gmd.de/pub/unix/kernel/scg/ ...
ftp://ftp.fokus.gmd.de/pub/unix/kernel/fbk/ ...

The cdrecord distribution contains a SCSI user level transport library.
The SCSI library is suitable to talk to any SCSI device without having
a special driver for it.

If you need mkisofs, it is located on:

ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/mkisofs-1.11.tar.gz

but it is also contained in cdrecord-1.6

Joerg