diff --git a/Documentation/ABI/testing/sysfs-bus-fcoe b/Documentation/ABI/testing/sysfs-bus-fcoe
index 50e2a80..21640ea 100644
--- a/Documentation/ABI/testing/sysfs-bus-fcoe
+++ b/Documentation/ABI/testing/sysfs-bus-fcoe
@@ -1,14 +1,53 @@
-What: /sys/bus/fcoe/ctlr_X
+What: /sys/bus/fcoe/
+Date: August 2012
+KernelVersion: TBD
+Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description: The FCoE bus. Attributes in this directory are control interfaces.
+Attributes:
+
+ ctlr_create: 'FCoE Controller' instance creation interface. Writing an
+ <ifname> to this file will allocate and populate sysfs with a
+ fcoe_ctlr_device (ctlr_X). The user can then configure any
+ per-port settings and finally write to the fcoe_ctlr_device's
+ 'start' attribute to begin the kernel's discovery and login
+ process.
+
+ ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a
+ fcoe_ctlr_device's sysfs name to this file will log the
+ fcoe_ctlr_device out of the fabric or otherwise connected
+ FCoE devices. It will also free all kernel memory allocated
+ for this fcoe_ctlr_device and any structures associated
+ with it, this includes the scsi_host.
+
+What: /sys/bus/fcoe/devices/ctlr_X
Date: March 2012
KernelVersion: TBD
Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
-Description: 'FCoE Controller' instances on the fcoe bus
+Description: 'FCoE Controller' instances on the fcoe bus.
+ The FCoE Controller now has a three stage creation process.
+ 1) Write interface name to ctlr_create 2) Configure the FCoE
+ Controller (ctlr_X) 3) Enable the FCoE Controller to begin
+ discovery and login. The FCoE Controller is destroyed by
+ writing it's name, i.e. ctlr_X to the ctlr_delete file.
+
Attributes:
fcf_dev_loss_tmo: Device loss timeout peroid (see below). Changing
this value will change the dev_loss_tmo for all
FCFs discovered by this controller.
+ mode: Display or change the FCoE Controller's mode. Possible
+ modes are 'Fabric' and 'VN2VN'. If a FCoE Controller
+ is started in 'Fabric' mode then FIP FCF discovery is
+ initiated and ultimately a fabric login is attempted.
+ If a FCoE Controller is started in 'VN2VN' mode then
+ FIP VN2VN discovery and login is performed. A FCoE
+ Controller only supports one mode at a time.
+
+ enabled: Whether an FCoE controller is enabled or disabled.
+ 0 if disabled, 1 if enabled. Writing either 0 or 1
+ to this file will enable or disable the FCoE controller.
+
lesb/link_fail: Link Error Status Block (LESB) link failure count.
lesb/vlink_fail: Link Error Status Block (LESB) virtual link
@@ -26,7 +65,7 @@ Attributes:
Notes: ctlr_X (global increment starting at 0)
-What: /sys/bus/fcoe/fcf_X
+What: /sys/bus/fcoe/devices/fcf_X
Date: March 2012
KernelVersion: TBD
Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index da03146..09673c7 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,12 @@
+Release Date : Sat. Feb 9, 2013 17:00:00 PST 2013 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Adam Radford
+Current Version : 06.506.00.00-rc1
+Old Version : 06.504.01.00-rc1
+ 1. Add 4k FastPath DIF support.
+ 2. Dont load DevHandle unless FastPath enabled.
+ 3. Version and Changelog update.
+-------------------------------------------------------------------------------
Release Date : Mon. Oct 1, 2012 17:00:00 PST 2012 -
(emaild-id:megaraidlinux@lsi.com)
Adam Radford
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 3b021ec..e2e3492 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -407,7 +407,7 @@ static int aac_src_deliver_message(struct fib *fib)
fib->hw_fib_va->header.StructType = FIB_MAGIC2;
fib->hw_fib_va->header.SenderFibAddress = (u32)address;
fib->hw_fib_va->header.u.TimeStamp = 0;
- BUG_ON((u32)(address >> 32) != 0L);
+ BUG_ON(upper_32_bits(address) != 0L);
address |= fibsize;
} else {
/* Calculate the amount to the fibsize bits */
@@ -431,7 +431,7 @@ static int aac_src_deliver_message(struct fib *fib)
address |= fibsize;
}
- src_writel(dev, MUnit.IQ_H, (address >> 32) & 0xffffffff);
+ src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff);
src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
return 0;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 6401db4..2daf4b0 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -62,6 +62,10 @@ static int bnx2fc_destroy(struct net_device *net_device);
static int bnx2fc_enable(struct net_device *netdev);
static int bnx2fc_disable(struct net_device *netdev);
+/* fcoe_syfs control interface handlers */
+static int bnx2fc_ctlr_alloc(struct net_device *netdev);
+static int bnx2fc_ctlr_enabled(struct fcoe_ctlr_device *cdev);
+
static void bnx2fc_recv_frame(struct sk_buff *skb);
static void bnx2fc_start_disc(struct bnx2fc_interface *interface);
@@ -89,7 +93,6 @@ static void bnx2fc_port_shutdown(struct fc_lport *lport);
static void bnx2fc_stop(struct bnx2fc_interface *interface);
static int __init bnx2fc_mod_init(void);
static void __exit bnx2fc_mod_exit(void);
-static void bnx2fc_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev);
unsigned int bnx2fc_debug_level;
module_param_named(debug_logging, bnx2fc_debug_level, int, S_IRUGO|S_IWUSR);
@@ -107,44 +110,6 @@ static inline struct net_device *bnx2fc_netdev(const struct fc_lport *lport)
((struct fcoe_port *)lport_priv(lport))->priv)->netdev;
}
-/**
- * bnx2fc_get_lesb() - Fill the FCoE Link Error Status Block
- * @lport: the local port
- * @fc_lesb: the link error status block
- */
-static void bnx2fc_get_lesb(struct fc_lport *lport,
- struct fc_els_lesb *fc_lesb)
-{
- struct net_device *netdev = bnx2fc_netdev(lport);
-
- __fcoe_get_lesb(lport, fc_lesb, netdev);
-}
-
-static void bnx2fc_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev)
-{
- struct fcoe_ctlr *fip = fcoe_ctlr_device_priv(ctlr_dev);
- struct net_device *netdev = bnx2fc_netdev(fip->lp);
- struct fcoe_fc_els_lesb *fcoe_lesb;
- struct fc_els_lesb fc_lesb;
-
- __fcoe_get_lesb(fip->lp, &fc_lesb, netdev);
- fcoe_lesb = (struct fcoe_fc_els_lesb *)(&fc_lesb);
-
- ctlr_dev->lesb.lesb_link_fail =
- ntohl(fcoe_lesb->lesb_link_fail);
- ctlr_dev->lesb.lesb_vlink_fail =
- ntohl(fcoe_lesb->lesb_vlink_fail);
- ctlr_dev->lesb.lesb_miss_fka =
- ntohl(fcoe_lesb->lesb_miss_fka);
- ctlr_dev->lesb.lesb_symb_err =
- ntohl(fcoe_lesb->lesb_symb_err);
- ctlr_dev->lesb.lesb_err_block =
- ntohl(fcoe_lesb->lesb_err_block);
- ctlr_dev->lesb.lesb_fcs_error =
- ntohl(fcoe_lesb->lesb_fcs_error);
-}
-EXPORT_SYMBOL(bnx2fc_ctlr_get_lesb);
-
static void bnx2fc_fcf_get_vlan_id(struct fcoe_fcf_device *fcf_dev)
{
struct fcoe_ctlr_device *ctlr_dev =
@@ -741,35 +706,6 @@ static int bnx2fc_shost_config(struct fc_lport *lport, struct device *dev)
return 0;
}
-static void bnx2fc_link_speed_update(struct fc_lport *lport)
-{
- struct fcoe_port *port = lport_priv(lport);
- struct bnx2fc_interface *interface = port->priv;
- struct net_device *netdev = interface->netdev;
- struct ethtool_cmd ecmd;
-
- if (!__ethtool_get_settings(netdev, &ecmd)) {
- lport->link_supported_speeds &=
- ~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT);
- if (ecmd.supported & (SUPPORTED_1000baseT_Half |
- SUPPORTED_1000baseT_Full))
- lport->link_supported_speeds |= FC_PORTSPEED_1GBIT;
- if (ecmd.supported & SUPPORTED_10000baseT_Full)
- lport->link_supported_speeds |= FC_PORTSPEED_10GBIT;
-
- switch (ethtool_cmd_speed(&ecmd)) {
- case SPEED_1000:
- lport->link_speed = FC_PORTSPEED_1GBIT;
- break;
- case SPEED_2500:
- lport->link_speed = FC_PORTSPEED_2GBIT;
- break;
- case SPEED_10000:
- lport->link_speed = FC_PORTSPEED_10GBIT;
- break;
- }
- }
-}
static int bnx2fc_link_ok(struct fc_lport *lport)
{
struct fcoe_port *port = lport_priv(lport);
@@ -827,7 +763,7 @@ static int bnx2fc_net_config(struct fc_lport *lport, struct net_device *netdev)
port->fcoe_pending_queue_active = 0;
setup_timer(&port->timer, fcoe_queue_timer, (unsigned long) lport);
- bnx2fc_link_speed_update(lport);
+ fcoe_link_speed_update(lport);
if (!lport->vport) {
if (fcoe_get_wwn(netdev, &wwnn, NETDEV_FCOE_WWNN))
@@ -871,6 +807,7 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event,
u16 vlan_id)
{
struct bnx2fc_hba *hba = (struct bnx2fc_hba *)context;
+ struct fcoe_ctlr_device *cdev;
struct fc_lport *lport;
struct fc_lport *vport;
struct bnx2fc_interface *interface, *tmp;
@@ -930,30 +867,47 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event,
BNX2FC_HBA_DBG(lport, "netevent handler - event=%s %ld\n",
interface->netdev->name, event);
- bnx2fc_link_speed_update(lport);
+ fcoe_link_speed_update(lport);
+
+ cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
if (link_possible && !bnx2fc_link_ok(lport)) {
- /* Reset max recv frame size to default */
- fc_set_mfs(lport, BNX2FC_MFS);
- /*
- * ctlr link up will only be handled during
- * enable to avoid sending discovery solicitation
- * on a stale vlan
- */
- if (interface->enabled)
- fcoe_ctlr_link_up(ctlr);
+ switch (cdev->enabled) {
+ case FCOE_CTLR_DISABLED:
+ pr_info("Link up while interface is disabled.\n");
+ break;
+ case FCOE_CTLR_ENABLED:
+ case FCOE_CTLR_UNUSED:
+ /* Reset max recv frame size to default */
+ fc_set_mfs(lport, BNX2FC_MFS);
+ /*
+ * ctlr link up will only be handled during
+ * enable to avoid sending discovery
+ * solicitation on a stale vlan
+ */
+ if (interface->enabled)
+ fcoe_ctlr_link_up(ctlr);
+ };
} else if (fcoe_ctlr_link_down(ctlr)) {
- mutex_lock(&lport->lp_mutex);
- list_for_each_entry(vport, &lport->vports, list)
- fc_host_port_type(vport->host) =
- FC_PORTTYPE_UNKNOWN;
- mutex_unlock(&lport->lp_mutex);
- fc_host_port_type(lport->host) = FC_PORTTYPE_UNKNOWN;
- per_cpu_ptr(lport->stats,
- get_cpu())->LinkFailureCount++;
- put_cpu();
- fcoe_clean_pending_queue(lport);
- wait_for_upload = 1;
+ switch (cdev->enabled) {
+ case FCOE_CTLR_DISABLED:
+ pr_info("Link down while interface is disabled.\n");
+ break;
+ case FCOE_CTLR_ENABLED:
+ case FCOE_CTLR_UNUSED:
+ mutex_lock(&lport->lp_mutex);
+ list_for_each_entry(vport, &lport->vports, list)
+ fc_host_port_type(vport->host) =
+ FC_PORTTYPE_UNKNOWN;
+ mutex_unlock(&lport->lp_mutex);
+ fc_host_port_type(lport->host) =
+ FC_PORTTYPE_UNKNOWN;
+ per_cpu_ptr(lport->stats,
+ get_cpu())->LinkFailureCount++;
+ put_cpu();
+ fcoe_clean_pending_queue(lport);
+ wait_for_upload = 1;
+ };
}
}
mutex_unlock(&bnx2fc_dev_lock);
@@ -1484,6 +1438,7 @@ static struct fc_lport *bnx2fc_if_create(struct bnx2fc_interface *interface,
port = lport_priv(lport);
port->lport = lport;
port->priv = interface;
+ port->get_netdev = bnx2fc_netdev;
INIT_WORK(&port->destroy_work, bnx2fc_destroy_work);
/* Configure fcoe_port */
@@ -2003,7 +1958,9 @@ static void bnx2fc_ulp_init(struct cnic_dev *dev)
set_bit(BNX2FC_CNIC_REGISTERED, &hba->reg_with_cnic);
}
-
+/**
+ * Deperecated: Use bnx2fc_enabled()
+ */
static int bnx2fc_disable(struct net_device *netdev)
{
struct bnx2fc_interface *interface;
@@ -2029,7 +1986,9 @@ static int bnx2fc_disable(struct net_device *netdev)
return rc;
}
-
+/**
+ * Deprecated: Use bnx2fc_enabled()
+ */
static int bnx2fc_enable(struct net_device *netdev)
{
struct bnx2fc_interface *interface;
@@ -2055,17 +2014,57 @@ static int bnx2fc_enable(struct net_device *netdev)
}
/**
- * bnx2fc_create - Create bnx2fc FCoE interface
+ * bnx2fc_ctlr_enabled() - Enable or disable an FCoE Controller
+ * @cdev: The FCoE Controller that is being enabled or disabled
+ *
+ * fcoe_sysfs will ensure that the state of 'enabled' has
+ * changed, so no checking is necessary here. This routine simply
+ * calls fcoe_enable or fcoe_disable, both of which are deprecated.
+ * When those routines are removed the functionality can be merged
+ * here.
+ */
+static int bnx2fc_ctlr_enabled(struct fcoe_ctlr_device *cdev)
+{
+ struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(cdev);
+ struct fc_lport *lport = ctlr->lp;
+ struct net_device *netdev = bnx2fc_netdev(lport);
+
+ switch (cdev->enabled) {
+ case FCOE_CTLR_ENABLED:
+ return bnx2fc_enable(netdev);
+ case FCOE_CTLR_DISABLED:
+ return bnx2fc_disable(netdev);
+ case FCOE_CTLR_UNUSED:
+ default:
+ return -ENOTSUPP;
+ };
+}
+
+enum bnx2fc_create_link_state {
+ BNX2FC_CREATE_LINK_DOWN,
+ BNX2FC_CREATE_LINK_UP,
+};
+
+/**
+ * _bnx2fc_create() - Create bnx2fc FCoE interface
+ * @netdev : The net_device object the Ethernet interface to create on
+ * @fip_mode: The FIP mode for this creation
+ * @link_state: The ctlr link state on creation
*
- * @buffer: The name of Ethernet interface to create on
- * @kp: The associated kernel param
+ * Called from either the libfcoe 'create' module parameter
+ * via fcoe_create or from fcoe_syfs's ctlr_create file.
*
- * Called from sysfs.
+ * libfcoe's 'create' module parameter is deprecated so some
+ * consolidation of code can be done when that interface is
+ * removed.
*
* Returns: 0 for success
*/
-static int bnx2fc_create(struct net_device *netdev, enum fip_state fip_mode)
+static int _bnx2fc_create(struct net_device *netdev,
+ enum fip_state fip_mode,
+ enum bnx2fc_create_link_state link_state)
{
+ struct fcoe_ctlr_device *cdev;
struct fcoe_ctlr *ctlr;
struct bnx2fc_interface *interface;
struct bnx2fc_hba *hba;
@@ -2160,7 +2159,15 @@ static int bnx2fc_create(struct net_device *netdev, enum fip_state fip_mode)
/* Make this master N_port */
ctlr->lp = lport;
- if (!bnx2fc_link_ok(lport)) {
+ cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
+
+ if (link_state == BNX2FC_CREATE_LINK_UP)
+ cdev->enabled = FCOE_CTLR_ENABLED;
+ else
+ cdev->enabled = FCOE_CTLR_DISABLED;
+
+ if (link_state == BNX2FC_CREATE_LINK_UP &&
+ !bnx2fc_link_ok(lport)) {
fcoe_ctlr_link_up(ctlr);
fc_host_port_type(lport->host) = FC_PORTTYPE_NPORT;
set_bit(ADAPTER_STATE_READY, &interface->hba->adapter_state);
@@ -2168,7 +2175,10 @@ static int bnx2fc_create(struct net_device *netdev, enum fip_state fip_mode)
BNX2FC_HBA_DBG(lport, "create: START DISC\n");
bnx2fc_start_disc(interface);
- interface->enabled = true;
+
+ if (link_state == BNX2FC_CREATE_LINK_UP)
+ interface->enabled = true;
+
/*
* Release from kref_init in bnx2fc_interface_setup, on success
* lport should be holding a reference taken in bnx2fc_if_create
@@ -2194,6 +2204,37 @@ mod_err:
}
/**
+ * bnx2fc_create() - Create a bnx2fc interface
+ * @netdev : The net_device object the Ethernet interface to create on
+ * @fip_mode: The FIP mode for this creation
+ *
+ * Called from fcoe transport
+ *
+ * Returns: 0 for success
+ */
+static int bnx2fc_create(struct net_device *netdev, enum fip_state fip_mode)
+{
+ return _bnx2fc_create(netdev, fip_mode, BNX2FC_CREATE_LINK_UP);
+}
+
+/**
+ * bnx2fc_ctlr_alloc() - Allocate a bnx2fc interface from fcoe_sysfs
+ * @netdev: The net_device to be used by the allocated FCoE Controller
+ *
+ * This routine is called from fcoe_sysfs. It will start the fcoe_ctlr
+ * in a link_down state. The allows the user an opportunity to configure
+ * the FCoE Controller from sysfs before enabling the FCoE Controller.
+ *
+ * Creating in with this routine starts the FCoE Controller in Fabric
+ * mode. The user can change to VN2VN or another mode before enabling.
+ */
+static int bnx2fc_ctlr_alloc(struct net_device *netdev)
+{
+ return _bnx2fc_create(netdev, FIP_MODE_FABRIC,
+ BNX2FC_CREATE_LINK_DOWN);
+}
+
+/**
* bnx2fc_find_hba_for_cnic - maps cnic instance to bnx2fc hba instance
*
* @cnic: Pointer to cnic device instance
@@ -2318,6 +2359,7 @@ static struct fcoe_transport bnx2fc_transport = {
.name = {"bnx2fc"},
.attached = false,
.list = LIST_HEAD_INIT(bnx2fc_transport.list),
+ .alloc = bnx2fc_ctlr_alloc,
.match = bnx2fc_match,
.create = bnx2fc_create,
.destroy = bnx2fc_destroy,
@@ -2562,13 +2604,13 @@ module_init(bnx2fc_mod_init);
module_exit(bnx2fc_mod_exit);
static struct fcoe_sysfs_function_template bnx2fc_fcoe_sysfs_templ = {
- .get_fcoe_ctlr_mode = fcoe_ctlr_get_fip_mode,
- .get_fcoe_ctlr_link_fail = bnx2fc_ctlr_get_lesb,
- .get_fcoe_ctlr_vlink_fail = bnx2fc_ctlr_get_lesb,
- .get_fcoe_ctlr_miss_fka = bnx2fc_ctlr_get_lesb,
- .get_fcoe_ctlr_symb_err = bnx2fc_ctlr_get_lesb,
- .get_fcoe_ctlr_err_block = bnx2fc_ctlr_get_lesb,
- .get_fcoe_ctlr_fcs_error = bnx2fc_ctlr_get_lesb,
+ .set_fcoe_ctlr_enabled = bnx2fc_ctlr_enabled,
+ .get_fcoe_ctlr_link_fail = fcoe_ctlr_get_lesb,
+ .get_fcoe_ctlr_vlink_fail = fcoe_ctlr_get_lesb,
+ .get_fcoe_ctlr_miss_fka = fcoe_ctlr_get_lesb,
+ .get_fcoe_ctlr_symb_err = fcoe_ctlr_get_lesb,
+ .get_fcoe_ctlr_err_block = fcoe_ctlr_get_lesb,
+ .get_fcoe_ctlr_fcs_error = fcoe_ctlr_get_lesb,
.get_fcoe_fcf_selected = fcoe_fcf_get_selected,
.get_fcoe_fcf_vlan_id = bnx2fc_fcf_get_vlan_id,
@@ -2675,7 +2717,7 @@ static struct libfc_function_template bnx2fc_libfc_fcn_templ = {
.elsct_send = bnx2fc_elsct_send,
.fcp_abort_io = bnx2fc_abort_io,
.fcp_cleanup = bnx2fc_cleanup,
- .get_lesb = bnx2fc_get_lesb,
+ .get_lesb = fcoe_get_lesb,
.rport_event_callback = bnx2fc_rport_event_handler,
};
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 865c64f..fed486bf 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -3747,13 +3747,13 @@ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
dcb->max_command = 1;
dcb->target_id = target;
dcb->target_lun = lun;
+ dcb->dev_mode = eeprom->target[target].cfg0;
#ifndef DC395x_NO_DISCONNECT
dcb->identify_msg =
IDENTIFY(dcb->dev_mode & NTC_DO_DISCONNECT, lun);
#else
dcb->identify_msg = IDENTIFY(0, lun);
#endif
- dcb->dev_mode = eeprom->target[target].cfg0;
dcb->inquiry7 = 0;
dcb->sync_mode = 0;
dcb->min_nego_period = clock_period[period_index];
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 666b7ac..b5d92fc 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -82,11 +82,11 @@ static int fcoe_rcv(struct sk_buff *, struct net_device *,
struct packet_type *, struct net_device *);
static int fcoe_percpu_receive_thread(void *);
static void fcoe_percpu_clean(struct fc_lport *);
-static int fcoe_link_speed_update(struct fc_lport *);
static int fcoe_link_ok(struct fc_lport *);
static struct fc_lport *fcoe_hostlist_lookup(const struct net_device *);
static int fcoe_hostlist_add(const struct fc_lport *);
+static void fcoe_hostlist_del(const struct fc_lport *);
static int fcoe_device_notification(struct notifier_block *, ulong, void *);
static void fcoe_dev_setup(void);
@@ -117,6 +117,11 @@ static int fcoe_destroy(struct net_device *netdev);
static int fcoe_enable(struct net_device *netdev);
static int fcoe_disable(struct net_device *netdev);
+/* fcoe_syfs control interface handlers */
+static int fcoe_ctlr_alloc(struct net_device *netdev);
+static int fcoe_ctlr_enabled(struct fcoe_ctlr_device *cdev);
+
+
static struct fc_seq *fcoe_elsct_send(struct fc_lport *,
u32 did, struct fc_frame *,
unsigned int op,
@@ -126,8 +131,6 @@ static struct fc_seq *fcoe_elsct_send(struct fc_lport *,
void *, u32 timeout);
static void fcoe_recv_frame(struct sk_buff *skb);
-static void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *);
-
/* notification function for packets from net device */
static struct notifier_block fcoe_notifier = {
.notifier_call = fcoe_device_notification,
@@ -151,11 +154,11 @@ static int fcoe_vport_create(struct fc_vport *, bool disabled);
static int fcoe_vport_disable(struct fc_vport *, bool disable);
static void fcoe_set_vport_symbolic_name(struct fc_vport *);
static void fcoe_set_port_id(struct fc_lport *, u32, struct fc_frame *);
-static void fcoe_ctlr_get_lesb(struct fcoe_ctlr_device *);
static void fcoe_fcf_get_vlan_id(struct fcoe_fcf_device *);
static struct fcoe_sysfs_function_template fcoe_sysfs_templ = {
- .get_fcoe_ctlr_mode = fcoe_ctlr_get_fip_mode,
+ .set_fcoe_ctlr_mode = fcoe_ctlr_set_fip_mode,
+ .set_fcoe_ctlr_enabled = fcoe_ctlr_enabled,
.get_fcoe_ctlr_link_fail = fcoe_ctlr_get_lesb,
.get_fcoe_ctlr_vlink_fail = fcoe_ctlr_get_lesb,
.get_fcoe_ctlr_miss_fka = fcoe_ctlr_get_lesb,
@@ -1112,10 +1115,17 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe,
port = lport_priv(lport);
port->lport = lport;
port->priv = fcoe;
+ port->get_netdev = fcoe_netdev;
port->max_queue_depth = FCOE_MAX_QUEUE_DEPTH;
port->min_queue_depth = FCOE_MIN_QUEUE_DEPTH;
INIT_WORK(&port->destroy_work, fcoe_destroy_work);
+ /*
+ * Need to add the lport to the hostlist
+ * so we catch NETDEV_CHANGE events.
+ */
+ fcoe_hostlist_add(lport);
+
/* configure a fc_lport including the exchange manager */
rc = fcoe_lport_config(lport);
if (rc) {
@@ -1187,6 +1197,7 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe,
out_lp_destroy:
fc_exch_mgr_free(lport);
out_host_put:
+ fcoe_hostlist_del(lport);
scsi_host_put(lport->host);
out:
return ERR_PTR(rc);
@@ -1964,6 +1975,7 @@ static int fcoe_dcb_app_notification(struct notifier_block *notifier,
static int fcoe_device_notification(struct notifier_block *notifier,
ulong event, void *ptr)
{
+ struct fcoe_ctlr_device *cdev;
struct fc_lport *lport = NULL;
struct net_device *netdev = ptr;
struct fcoe_ctlr *ctlr;
@@ -2020,13 +2032,29 @@ static int fcoe_device_notification(struct notifier_block *notifier,
fcoe_link_speed_update(lport);
- if (link_possible && !fcoe_link_ok(lport))
- fcoe_ctlr_link_up(ctlr);
- else if (fcoe_ctlr_link_down(ctlr)) {
- stats = per_cpu_ptr(lport->stats, get_cpu());
- stats->LinkFailureCount++;
- put_cpu();
- fcoe_clean_pending_queue(lport);
+ cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
+
+ if (link_possible && !fcoe_link_ok(lport)) {
+ switch (cdev->enabled) {
+ case FCOE_CTLR_DISABLED:
+ pr_info("Link up while interface is disabled.\n");
+ break;
+ case FCOE_CTLR_ENABLED:
+ case FCOE_CTLR_UNUSED:
+ fcoe_ctlr_link_up(ctlr);
+ };
+ } else if (fcoe_ctlr_link_down(ctlr)) {
+ switch (cdev->enabled) {
+ case FCOE_CTLR_DISABLED:
+ pr_info("Link down while interface is disabled.\n");
+ break;
+ case FCOE_CTLR_ENABLED:
+ case FCOE_CTLR_UNUSED:
+ stats = per_cpu_ptr(lport->stats, get_cpu());
+ stats->LinkFailureCount++;
+ put_cpu();
+ fcoe_clean_pending_queue(lport);
+ };
}
out:
return rc;
@@ -2039,6 +2067,8 @@ out:
* Called from fcoe transport.
*
* Returns: 0 for success
+ *
+ * Deprecated: use fcoe_ctlr_enabled()
*/
static int fcoe_disable(struct net_device *netdev)
{
@@ -2098,6 +2128,33 @@ out:
}
/**
+ * fcoe_ctlr_enabled() - Enable or disable an FCoE Controller
+ * @cdev: The FCoE Controller that is being enabled or disabled
+ *
+ * fcoe_sysfs will ensure that the state of 'enabled' has
+ * changed, so no checking is necessary here. This routine simply
+ * calls fcoe_enable or fcoe_disable, both of which are deprecated.
+ * When those routines are removed the functionality can be merged
+ * here.
+ */
+static int fcoe_ctlr_enabled(struct fcoe_ctlr_device *cdev)
+{
+ struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(cdev);
+ struct fc_lport *lport = ctlr->lp;
+ struct net_device *netdev = fcoe_netdev(lport);
+
+ switch (cdev->enabled) {
+ case FCOE_CTLR_ENABLED:
+ return fcoe_enable(netdev);
+ case FCOE_CTLR_DISABLED:
+ return fcoe_disable(netdev);
+ case FCOE_CTLR_UNUSED:
+ default:
+ return -ENOTSUPP;
+ };
+}
+
+/**
* fcoe_destroy() - Destroy a FCoE interface
* @netdev : The net_device object the Ethernet interface to create on
*
@@ -2139,8 +2196,31 @@ static void fcoe_destroy_work(struct work_struct *work)
{
struct fcoe_port *port;
struct fcoe_interface *fcoe;
+ struct Scsi_Host *shost;
+ struct fc_host_attrs *fc_host;
+ unsigned long flags;
+ struct fc_vport *vport;
+ struct fc_vport *next_vport;
port = container_of(work, struct fcoe_port, destroy_work);
+ shost = port->lport->host;
+ fc_host = shost_to_fc_host(shost);
+
+ /* Loop through all the vports and mark them for deletion */
+ spin_lock_irqsave(shost->host_lock, flags);
+ list_for_each_entry_safe(vport, next_vport, &fc_host->vports, peers) {
+ if (vport->flags & (FC_VPORT_DEL | FC_VPORT_CREATING)) {
+ continue;
+ } else {
+ vport->flags |= FC_VPORT_DELETING;
+ queue_work(fc_host_work_q(shost),
+ &vport->vport_delete_work);
+ }
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ flush_workqueue(fc_host_work_q(shost));
+
mutex_lock(&fcoe_config_mutex);
fcoe = port->priv;
@@ -2204,16 +2284,26 @@ static void fcoe_dcb_create(struct fcoe_interface *fcoe)
#endif
}
+enum fcoe_create_link_state {
+ FCOE_CREATE_LINK_DOWN,
+ FCOE_CREATE_LINK_UP,
+};
+
/**
- * fcoe_create() - Create a fcoe interface
- * @netdev : The net_device object the Ethernet interface to create on
- * @fip_mode: The FIP mode for this creation
+ * _fcoe_create() - (internal) Create a fcoe interface
+ * @netdev : The net_device object the Ethernet interface to create on
+ * @fip_mode: The FIP mode for this creation
+ * @link_state: The ctlr link state on creation
*
- * Called from fcoe transport
+ * Called from either the libfcoe 'create' module parameter
+ * via fcoe_create or from fcoe_syfs's ctlr_create file.
*
- * Returns: 0 for success
+ * libfcoe's 'create' module parameter is deprecated so some
+ * consolidation of code can be done when that interface is
+ * removed.
*/
-static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode)
+static int _fcoe_create(struct net_device *netdev, enum fip_state fip_mode,
+ enum fcoe_create_link_state link_state)
{
int rc = 0;
struct fcoe_ctlr_device *ctlr_dev;
@@ -2254,13 +2344,29 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode)
/* setup DCB priority attributes. */
fcoe_dcb_create(fcoe);
- /* add to lports list */
- fcoe_hostlist_add(lport);
-
/* start FIP Discovery and FLOGI */
lport->boot_time = jiffies;
fc_fabric_login(lport);
- if (!fcoe_link_ok(lport)) {
+
+ /*
+ * If the fcoe_ctlr_device is to be set to DISABLED
+ * it must be done after the lport is added to the
+ * hostlist, but before the rtnl_lock is released.
+ * This is because the rtnl_lock protects the
+ * hostlist that fcoe_device_notification uses. If
+ * the FCoE Controller is intended to be created
+ * DISABLED then 'enabled' needs to be considered
+ * handling link events. 'enabled' must be set
+ * before the lport can be found in the hostlist
+ * when a link up event is received.
+ */
+ if (link_state == FCOE_CREATE_LINK_UP)
+ ctlr_dev->enabled = FCOE_CTLR_ENABLED;
+ else
+ ctlr_dev->enabled = FCOE_CTLR_DISABLED;
+
+ if (link_state == FCOE_CREATE_LINK_UP &&
+ !fcoe_link_ok(lport)) {
rtnl_unlock();
fcoe_ctlr_link_up(ctlr);
mutex_unlock(&fcoe_config_mutex);
@@ -2275,37 +2381,34 @@ out_nortnl:
}
/**
- * fcoe_link_speed_update() - Update the supported and actual link speeds
- * @lport: The local port to update speeds for
+ * fcoe_create() - Create a fcoe interface
+ * @netdev : The net_device object the Ethernet interface to create on
+ * @fip_mode: The FIP mode for this creation
+ *
+ * Called from fcoe transport
+ *
+ * Returns: 0 for success
+ */
+static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode)
+{
+ return _fcoe_create(netdev, fip_mode, FCOE_CREATE_LINK_UP);
+}
+
+/**
+ * fcoe_ctlr_alloc() - Allocate a fcoe interface from fcoe_sysfs
+ * @netdev: The net_device to be used by the allocated FCoE Controller
*
- * Returns: 0 if the ethtool query was successful
- * -1 if the ethtool query failed
+ * This routine is called from fcoe_sysfs. It will start the fcoe_ctlr
+ * in a link_down state. The allows the user an opportunity to configure
+ * the FCoE Controller from sysfs before enabling the FCoE Controller.
+ *
+ * Creating in with this routine starts the FCoE Controller in Fabric
+ * mode. The user can change to VN2VN or another mode before enabling.
*/
-static int fcoe_link_speed_update(struct fc_lport *lport)
+static int fcoe_ctlr_alloc(struct net_device *netdev)
{
- struct net_device *netdev = fcoe_netdev(lport);
- struct ethtool_cmd ecmd;
-
- if (!__ethtool_get_settings(netdev, &ecmd)) {
- lport->link_supported_speeds &=
- ~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT);
- if (ecmd.supported & (SUPPORTED_1000baseT_Half |
- SUPPORTED_1000baseT_Full))
- lport->link_supported_speeds |= FC_PORTSPEED_1GBIT;
- if (ecmd.supported & SUPPORTED_10000baseT_Full)
- lport->link_supported_speeds |=
- FC_PORTSPEED_10GBIT;
- switch (ethtool_cmd_speed(&ecmd)) {
- case SPEED_1000:
- lport->link_speed = FC_PORTSPEED_1GBIT;
- break;
- case SPEED_10000:
- lport->link_speed = FC_PORTSPEED_10GBIT;
- break;
- }
- return 0;
- }
- return -1;
+ return _fcoe_create(netdev, FIP_MODE_FABRIC,
+ FCOE_CREATE_LINK_DOWN);
}
/**
@@ -2375,10 +2478,13 @@ static int fcoe_reset(struct Scsi_Host *shost)
struct fcoe_port *port = lport_priv(lport);
struct fcoe_interface *fcoe = port->priv;
struct fcoe_ctlr *ctlr = fcoe_to_ctlr(fcoe);
+ struct fcoe_ctlr_device *cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
fcoe_ctlr_link_down(ctlr);
fcoe_clean_pending_queue(ctlr->lp);
- if (!fcoe_link_ok(ctlr->lp))
+
+ if (cdev->enabled != FCOE_CTLR_DISABLED &&
+ !fcoe_link_ok(ctlr->lp))
fcoe_ctlr_link_up(ctlr);
return 0;
}
@@ -2445,12 +2551,31 @@ static int fcoe_hostlist_add(const struct fc_lport *lport)
return 0;
}
+/**
+ * fcoe_hostlist_del() - Remove the FCoE interface identified by a local
+ * port to the hostlist
+ * @lport: The local port that identifies the FCoE interface to be added
+ *
+ * Locking: must be called with the RTNL mutex held
+ *
+ */
+static void fcoe_hostlist_del(const struct fc_lport *lport)
+{
+ struct fcoe_interface *fcoe;
+ struct fcoe_port *port;
+
+ port = lport_priv(lport);
+ fcoe = port->priv;
+ list_del(&fcoe->list);
+ return;
+}
static struct fcoe_transport fcoe_sw_transport = {
.name = {FCOE_TRANSPORT_DEFAULT},
.attached = false,
.list = LIST_HEAD_INIT(fcoe_sw_transport.list),
.match = fcoe_match,
+ .alloc = fcoe_ctlr_alloc,
.create = fcoe_create,
.destroy = fcoe_destroy,
.enable = fcoe_enable,
@@ -2534,9 +2659,9 @@ static void __exit fcoe_exit(void)
/* releases the associated fcoe hosts */
rtnl_lock();
list_for_each_entry_safe(fcoe, tmp, &fcoe_hostlist, list) {
- list_del(&fcoe->list);
ctlr = fcoe_to_ctlr(fcoe);
port = lport_priv(ctlr->lp);
+ fcoe_hostlist_del(port->lport);
queue_work(fcoe_wq, &port->destroy_work);
}
rtnl_unlock();
@@ -2776,43 +2901,6 @@ static void fcoe_set_vport_symbolic_name(struct fc_vport *vport)
NULL, NULL, 3 * lport->r_a_tov);
}
-/**
- * fcoe_get_lesb() - Fill the FCoE Link Error Status Block
- * @lport: the local port
- * @fc_lesb: the link error status block
- */
-static void fcoe_get_lesb(struct fc_lport *lport,
- struct fc_els_lesb *fc_lesb)
-{
- struct net_device *netdev = fcoe_netdev(lport);
-
- __fcoe_get_lesb(lport, fc_lesb, netdev);
-}
-
-static void fcoe_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev)
-{
- struct fcoe_ctlr *fip = fcoe_ctlr_device_priv(ctlr_dev);
- struct net_device *netdev = fcoe_netdev(fip->lp);
- struct fcoe_fc_els_lesb *fcoe_lesb;
- struct fc_els_lesb fc_lesb;
-
- __fcoe_get_lesb(fip->lp, &fc_lesb, netdev);
- fcoe_lesb = (struct fcoe_fc_els_lesb *)(&fc_lesb);
-
- ctlr_dev->lesb.lesb_link_fail =
- ntohl(fcoe_lesb->lesb_link_fail);
- ctlr_dev->lesb.lesb_vlink_fail =
- ntohl(fcoe_lesb->lesb_vlink_fail);
- ctlr_dev->lesb.lesb_miss_fka =
- ntohl(fcoe_lesb->lesb_miss_fka);
- ctlr_dev->lesb.lesb_symb_err =
- ntohl(fcoe_lesb->lesb_symb_err);
- ctlr_dev->lesb.lesb_err_block =
- ntohl(fcoe_lesb->lesb_err_block);
- ctlr_dev->lesb.lesb_fcs_error =
- ntohl(fcoe_lesb->lesb_fcs_error);
-}
-
static void fcoe_fcf_get_vlan_id(struct fcoe_fcf_device *fcf_dev)
{
struct fcoe_ctlr_device *ctlr_dev =
diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h
index b42dc32..2b53672 100644
--- a/drivers/scsi/fcoe/fcoe.h
+++ b/drivers/scsi/fcoe/fcoe.h
@@ -55,12 +55,12 @@ do { \
#define FCOE_DBG(fmt, args...) \
FCOE_CHECK_LOGGING(FCOE_LOGGING, \
- printk(KERN_INFO "fcoe: " fmt, ##args);)
+ pr_info("fcoe: " fmt, ##args);)
#define FCOE_NETDEV_DBG(netdev, fmt, args...) \
FCOE_CHECK_LOGGING(FCOE_NETDEV_LOGGING, \
- printk(KERN_INFO "fcoe: %s: " fmt, \
- netdev->name, ##args);)
+ pr_info("fcoe: %s: " fmt, \
+ netdev->name, ##args);)
/**
* struct fcoe_interface - A FCoE interface
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 4a909d7..08c3bc3 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -1291,8 +1291,16 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip,
LIBFCOE_FIP_DBG(fip, "Clear Virtual Link received\n");
- if (!fcf || !lport->port_id)
+ if (!fcf || !lport->port_id) {
+ /*
+ * We are yet to select best FCF, but we got CVL in the
+ * meantime. reset the ctlr and let it rediscover the FCF
+ */
+ mutex_lock(&fip->ctlr_mutex);
+ fcoe_ctlr_reset(fip);
+ mutex_unlock(&fip->ctlr_mutex);
return;
+ }
/*
* mask of required descriptors. Validating each one clears its bit.
@@ -1551,15 +1559,6 @@ static struct fcoe_fcf *fcoe_ctlr_select(struct fcoe_ctlr *fip)
fcf->fabric_name, fcf->vfid, fcf->fcf_mac,
fcf->fc_map, fcoe_ctlr_mtu_valid(fcf),
fcf->flogi_sent, fcf->pri);
- if (fcf->fabric_name != first->fabric_name ||
- fcf->vfid != first->vfid ||
- fcf->fc_map != first->fc_map) {
- LIBFCOE_FIP_DBG(fip, "Conflicting fabric, VFID, "
- "or FC-MAP\n");
- return NULL;
- }
- if (fcf->flogi_sent)
- continue;
if (!fcoe_ctlr_fcf_usable(fcf)) {
LIBFCOE_FIP_DBG(fip, "FCF for fab %16.16llx "
"map %x %svalid %savailable\n",
@@ -1569,6 +1568,15 @@ static struct fcoe_fcf *fcoe_ctlr_select(struct fcoe_ctlr *fip)
"" : "un");
continue;
}
+ if (fcf->fabric_name != first->fabric_name ||
+ fcf->vfid != first->vfid ||
+ fcf->fc_map != first->fc_map) {
+ LIBFCOE_FIP_DBG(fip, "Conflicting fabric, VFID, "
+ "or FC-MAP\n");
+ return NULL;
+ }
+ if (fcf->flogi_sent)
+ continue;
if (!best || fcf->pri < best->pri || best->flogi_sent)
best = fcf;
}
@@ -2864,22 +2872,21 @@ void fcoe_fcf_get_selected(struct fcoe_fcf_device *fcf_dev)
}
EXPORT_SYMBOL(fcoe_fcf_get_selected);
-void fcoe_ctlr_get_fip_mode(struct fcoe_ctlr_device *ctlr_dev)
+void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *ctlr_dev)
{
struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(ctlr_dev);
mutex_lock(&ctlr->ctlr_mutex);
- switch (ctlr->mode) {
- case FIP_MODE_FABRIC:
- ctlr_dev->mode = FIP_CONN_TYPE_FABRIC;
- break;
- case FIP_MODE_VN2VN:
- ctlr_dev->mode = FIP_CONN_TYPE_VN2VN;
+ switch (ctlr_dev->mode) {
+ case FIP_CONN_TYPE_VN2VN:
+ ctlr->mode = FIP_MODE_VN2VN;
break;
+ case FIP_CONN_TYPE_FABRIC:
default:
- ctlr_dev->mode = FIP_CONN_TYPE_UNKNOWN;
+ ctlr->mode = FIP_MODE_FABRIC;
break;
}
+
mutex_unlock(&ctlr->ctlr_mutex);
}
-EXPORT_SYMBOL(fcoe_ctlr_get_fip_mode);
+EXPORT_SYMBOL(fcoe_ctlr_set_fip_mode);
diff --git a/drivers/scsi/fcoe/fcoe_sysfs.c b/drivers/scsi/fcoe/fcoe_sysfs.c
index 5e75168..8c05ae01 100644
--- a/drivers/scsi/fcoe/fcoe_sysfs.c
+++ b/drivers/scsi/fcoe/fcoe_sysfs.c
@@ -21,8 +21,17 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/etherdevice.h>
+#include <linux/ctype.h>
#include <scsi/fcoe_sysfs.h>
+#include <scsi/libfcoe.h>
+
+/*
+ * OK to include local libfcoe.h for debug_logging, but cannot include
+ * <scsi/libfcoe.h> otherwise non-netdev based fcoe solutions would have
+ * have to include more than fcoe_sysfs.h.
+ */
+#include "libfcoe.h"
static atomic_t ctlr_num;
static atomic_t fcf_num;
@@ -71,6 +80,8 @@ MODULE_PARM_DESC(fcf_dev_loss_tmo,
((x)->lesb.lesb_err_block)
#define fcoe_ctlr_fcs_error(x) \
((x)->lesb.lesb_fcs_error)
+#define fcoe_ctlr_enabled(x) \
+ ((x)->enabled)
#define fcoe_fcf_state(x) \
((x)->state)
#define fcoe_fcf_fabric_name(x) \
@@ -210,25 +221,34 @@ static ssize_t show_fcoe_fcf_device_##field(struct device *dev, \
#define fcoe_enum_name_search(title, table_type, table) \
static const char *get_fcoe_##title##_name(enum table_type table_key) \
{ \
- int i; \
- char *name = NULL; \
- \
- for (i = 0; i < ARRAY_SIZE(table); i++) { \
- if (table[i].value == table_key) { \
- name = table[i].name; \
- break; \
- } \
- } \
- return name; \
+ if (table_key < 0 || table_key >= ARRAY_SIZE(table)) \
+ return NULL; \
+ return table[table_key]; \
+}
+
+static char *fip_conn_type_names[] = {
+ [ FIP_CONN_TYPE_UNKNOWN ] = "Unknown",
+ [ FIP_CONN_TYPE_FABRIC ] = "Fabric",
+ [ FIP_CONN_TYPE_VN2VN ] = "VN2VN",
+};
+fcoe_enum_name_search(ctlr_mode, fip_conn_type, fip_conn_type_names)
+
+static enum fip_conn_type fcoe_parse_mode(const char *buf)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fip_conn_type_names); i++) {
+ if (strcasecmp(buf, fip_conn_type_names[i]) == 0)
+ return i;
+ }
+
+ return FIP_CONN_TYPE_UNKNOWN;
}
-static struct {
- enum fcf_state value;
- char *name;
-} fcf_state_names[] = {
- { FCOE_FCF_STATE_UNKNOWN, "Unknown" },
- { FCOE_FCF_STATE_DISCONNECTED, "Disconnected" },
- { FCOE_FCF_STATE_CONNECTED, "Connected" },
+static char *fcf_state_names[] = {
+ [ FCOE_FCF_STATE_UNKNOWN ] = "Unknown",
+ [ FCOE_FCF_STATE_DISCONNECTED ] = "Disconnected",
+ [ FCOE_FCF_STATE_CONNECTED ] = "Connected",
};
fcoe_enum_name_search(fcf_state, fcf_state, fcf_state_names)
#define FCOE_FCF_STATE_MAX_NAMELEN 50
@@ -246,17 +266,7 @@ static ssize_t show_fcf_state(struct device *dev,
}
static FCOE_DEVICE_ATTR(fcf, state, S_IRUGO, show_fcf_state, NULL);
-static struct {
- enum fip_conn_type value;
- char *name;
-} fip_conn_type_names[] = {
- { FIP_CONN_TYPE_UNKNOWN, "Unknown" },
- { FIP_CONN_TYPE_FABRIC, "Fabric" },
- { FIP_CONN_TYPE_VN2VN, "VN2VN" },
-};
-fcoe_enum_name_search(ctlr_mode, fip_conn_type, fip_conn_type_names)
-#define FCOE_CTLR_MODE_MAX_NAMELEN 50
-
+#define FCOE_MAX_MODENAME_LEN 20
static ssize_t show_ctlr_mode(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -264,17 +274,116 @@ static ssize_t show_ctlr_mode(struct device *dev,
struct fcoe_ctlr_device *ctlr = dev_to_ctlr(dev);
const char *name;
- if (ctlr->f->get_fcoe_ctlr_mode)
- ctlr->f->get_fcoe_ctlr_mode(ctlr);
-
name = get_fcoe_ctlr_mode_name(ctlr->mode);
if (!name)
return -EINVAL;
- return snprintf(buf, FCOE_CTLR_MODE_MAX_NAMELEN,
+ return snprintf(buf, FCOE_MAX_MODENAME_LEN,
+ "%s\n", name);
+}
+
+static ssize_t store_ctlr_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fcoe_ctlr_device *ctlr = dev_to_ctlr(dev);
+ char mode[FCOE_MAX_MODENAME_LEN + 1];
+
+ if (count > FCOE_MAX_MODENAME_LEN)
+ return -EINVAL;
+
+ strncpy(mode, buf, count);
+
+ if (mode[count - 1] == '\n')
+ mode[count - 1] = '\0';
+ else
+ mode[count] = '\0';
+
+ switch (ctlr->enabled) {
+ case FCOE_CTLR_ENABLED:
+ LIBFCOE_SYSFS_DBG(ctlr, "Cannot change mode when enabled.");
+ return -EBUSY;
+ case FCOE_CTLR_DISABLED:
+ if (!ctlr->f->set_fcoe_ctlr_mode) {
+ LIBFCOE_SYSFS_DBG(ctlr,
+ "Mode change not supported by LLD.");
+ return -ENOTSUPP;
+ }
+
+ ctlr->mode = fcoe_parse_mode(mode);
+ if (ctlr->mode == FIP_CONN_TYPE_UNKNOWN) {
+ LIBFCOE_SYSFS_DBG(ctlr,
+ "Unknown mode %s provided.", buf);
+ return -EINVAL;
+ }
+
+ ctlr->f->set_fcoe_ctlr_mode(ctlr);
+ LIBFCOE_SYSFS_DBG(ctlr, "Mode changed to %s.", buf);
+
+ return count;
+ case FCOE_CTLR_UNUSED:
+ default:
+ LIBFCOE_SYSFS_DBG(ctlr, "Mode change not supported.");
+ return -ENOTSUPP;
+ };
+}
+
+static FCOE_DEVICE_ATTR(ctlr, mode, S_IRUGO | S_IWUSR,
+ show_ctlr_mode, store_ctlr_mode);
+
+static ssize_t store_ctlr_enabled(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fcoe_ctlr_device *ctlr = dev_to_ctlr(dev);
+ int rc;
+
+ switch (ctlr->enabled) {
+ case FCOE_CTLR_ENABLED:
+ if (*buf == '1')
+ return count;
+ ctlr->enabled = FCOE_CTLR_DISABLED;
+ break;
+ case FCOE_CTLR_DISABLED:
+ if (*buf == '0')
+ return count;
+ ctlr->enabled = FCOE_CTLR_ENABLED;
+ break;
+ case FCOE_CTLR_UNUSED:
+ return -ENOTSUPP;
+ };
+
+ rc = ctlr->f->set_fcoe_ctlr_enabled(ctlr);
+ if (rc)
+ return rc;
+
+ return count;
+}
+
+static char *ctlr_enabled_state_names[] = {
+ [ FCOE_CTLR_ENABLED ] = "1",
+ [ FCOE_CTLR_DISABLED ] = "0",
+};
+fcoe_enum_name_search(ctlr_enabled_state, ctlr_enabled_state,
+ ctlr_enabled_state_names)
+#define FCOE_CTLR_ENABLED_MAX_NAMELEN 50
+
+static ssize_t show_ctlr_enabled_state(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct fcoe_ctlr_device *ctlr = dev_to_ctlr(dev);
+ const char *name;
+
+ name = get_fcoe_ctlr_enabled_state_name(ctlr->enabled);
+ if (!name)
+ return -EINVAL;
+ return snprintf(buf, FCOE_CTLR_ENABLED_MAX_NAMELEN,
"%s\n", name);
}
-static FCOE_DEVICE_ATTR(ctlr, mode, S_IRUGO,
- show_ctlr_mode, NULL);
+
+static FCOE_DEVICE_ATTR(ctlr, enabled, S_IRUGO | S_IWUSR,
+ show_ctlr_enabled_state,
+ store_ctlr_enabled);
static ssize_t
store_private_fcoe_ctlr_fcf_dev_loss_tmo(struct device *dev,
@@ -359,6 +468,7 @@ static struct attribute_group fcoe_ctlr_lesb_attr_group = {
static struct attribute *fcoe_ctlr_attrs[] = {
&device_attr_fcoe_ctlr_fcf_dev_loss_tmo.attr,
+ &device_attr_fcoe_ctlr_enabled.attr,
&device_attr_fcoe_ctlr_mode.attr,
NULL,
};
@@ -443,9 +553,16 @@ struct device_type fcoe_fcf_device_type = {
.release = fcoe_fcf_device_release,
};
+struct bus_attribute fcoe_bus_attr_group[] = {
+ __ATTR(ctlr_create, S_IWUSR, NULL, fcoe_ctlr_create_store),
+ __ATTR(ctlr_destroy, S_IWUSR, NULL, fcoe_ctlr_destroy_store),
+ __ATTR_NULL
+};
+
struct bus_type fcoe_bus_type = {
.name = "fcoe",
.match = &fcoe_bus_match,
+ .bus_attrs = fcoe_bus_attr_group,
};
/**
@@ -566,6 +683,7 @@ struct fcoe_ctlr_device *fcoe_ctlr_device_add(struct device *parent,
ctlr->id = atomic_inc_return(&ctlr_num) - 1;
ctlr->f = f;
+ ctlr->mode = FIP_CONN_TYPE_FABRIC;
INIT_LIST_HEAD(&ctlr->fcfs);
mutex_init(&ctlr->lock);
ctlr->dev.parent = parent;
diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c
index ac76d8a..f3a5a53 100644
--- a/drivers/scsi/fcoe/fcoe_transport.c
+++ b/drivers/scsi/fcoe/fcoe_transport.c
@@ -83,6 +83,50 @@ static struct notifier_block libfcoe_notifier = {
.notifier_call = libfcoe_device_notification,
};
+/**
+ * fcoe_link_speed_update() - Update the supported and actual link speeds
+ * @lport: The local port to update speeds for
+ *
+ * Returns: 0 if the ethtool query was successful
+ * -1 if the ethtool query failed
+ */
+int fcoe_link_speed_update(struct fc_lport *lport)
+{
+ struct net_device *netdev = fcoe_get_netdev(lport);
+ struct ethtool_cmd ecmd;
+
+ if (!__ethtool_get_settings(netdev, &ecmd)) {
+ lport->link_supported_speeds &=
+ ~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT);
+ if (ecmd.supported & (SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full))
+ lport->link_supported_speeds |= FC_PORTSPEED_1GBIT;
+ if (ecmd.supported & SUPPORTED_10000baseT_Full)
+ lport->link_supported_speeds |=
+ FC_PORTSPEED_10GBIT;
+ switch (ethtool_cmd_speed(&ecmd)) {
+ case SPEED_1000:
+ lport->link_speed = FC_PORTSPEED_1GBIT;
+ break;
+ case SPEED_10000:
+ lport->link_speed = FC_PORTSPEED_10GBIT;
+ break;
+ }
+ return 0;
+ }
+ return -1;
+}
+EXPORT_SYMBOL_GPL(fcoe_link_speed_update);
+
+/**
+ * __fcoe_get_lesb() - Get the Link Error Status Block (LESB) for a given lport
+ * @lport: The local port to update speeds for
+ * @fc_lesb: Pointer to the LESB to be filled up
+ * @netdev: Pointer to the netdev that is associated with the lport
+ *
+ * Note, the Link Error Status Block (LESB) for FCoE is defined in FC-BB-6
+ * Clause 7.11 in v1.04.
+ */
void __fcoe_get_lesb(struct fc_lport *lport,
struct fc_els_lesb *fc_lesb,
struct net_device *netdev)
@@ -112,6 +156,51 @@ void __fcoe_get_lesb(struct fc_lport *lport,
}
EXPORT_SYMBOL_GPL(__fcoe_get_lesb);
+/**
+ * fcoe_get_lesb() - Fill the FCoE Link Error Status Block
+ * @lport: the local port
+ * @fc_lesb: the link error status block
+ */
+void fcoe_get_lesb(struct fc_lport *lport,
+ struct fc_els_lesb *fc_lesb)
+{
+ struct net_device *netdev = fcoe_get_netdev(lport);
+
+ __fcoe_get_lesb(lport, fc_lesb, netdev);
+}
+EXPORT_SYMBOL_GPL(fcoe_get_lesb);
+
+/**
+ * fcoe_ctlr_get_lesb() - Get the Link Error Status Block (LESB) for a given
+ * fcoe controller device
+ * @ctlr_dev: The given fcoe controller device
+ *
+ */
+void fcoe_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev)
+{
+ struct fcoe_ctlr *fip = fcoe_ctlr_device_priv(ctlr_dev);
+ struct net_device *netdev = fcoe_get_netdev(fip->lp);
+ struct fcoe_fc_els_lesb *fcoe_lesb;
+ struct fc_els_lesb fc_lesb;
+
+ __fcoe_get_lesb(fip->lp, &fc_lesb, netdev);
+ fcoe_lesb = (struct fcoe_fc_els_lesb *)(&fc_lesb);
+
+ ctlr_dev->lesb.lesb_link_fail =
+ ntohl(fcoe_lesb->lesb_link_fail);
+ ctlr_dev->lesb.lesb_vlink_fail =
+ ntohl(fcoe_lesb->lesb_vlink_fail);
+ ctlr_dev->lesb.lesb_miss_fka =
+ ntohl(fcoe_lesb->lesb_miss_fka);
+ ctlr_dev->lesb.lesb_symb_err =
+ ntohl(fcoe_lesb->lesb_symb_err);
+ ctlr_dev->lesb.lesb_err_block =
+ ntohl(fcoe_lesb->lesb_err_block);
+ ctlr_dev->lesb.lesb_fcs_error =
+ ntohl(fcoe_lesb->lesb_fcs_error);
+}
+EXPORT_SYMBOL_GPL(fcoe_ctlr_get_lesb);
+
void fcoe_wwn_to_str(u64 wwn, char *buf, int len)
{
u8 wwpn[8];
@@ -627,6 +716,110 @@ static int libfcoe_device_notification(struct notifier_block *notifier,
return NOTIFY_OK;
}
+ssize_t fcoe_ctlr_create_store(struct bus_type *bus,
+ const char *buf, size_t count)
+{
+ struct net_device *netdev = NULL;
+ struct fcoe_transport *ft = NULL;
+ struct fcoe_ctlr_device *ctlr_dev = NULL;
+ int rc = 0;
+ int err;
+
+ mutex_lock(&ft_mutex);
+
+ netdev = fcoe_if_to_netdev(buf);
+ if (!netdev) {
+ LIBFCOE_TRANSPORT_DBG("Invalid device %s.\n", buf);
+ rc = -ENODEV;
+ goto out_nodev;
+ }
+
+ ft = fcoe_netdev_map_lookup(netdev);
+ if (ft) {
+ LIBFCOE_TRANSPORT_DBG("transport %s already has existing "
+ "FCoE instance on %s.\n",
+ ft->name, netdev->name);
+ rc = -EEXIST;
+ goto out_putdev;
+ }
+
+ ft = fcoe_transport_lookup(netdev);
+ if (!ft) {
+ LIBFCOE_TRANSPORT_DBG("no FCoE transport found for %s.\n",
+ netdev->name);
+ rc = -ENODEV;
+ goto out_putdev;
+ }
+
+ /* pass to transport create */
+ err = ft->alloc ? ft->alloc(netdev) : -ENODEV;
+ if (err) {
+ fcoe_del_netdev_mapping(netdev);
+ rc = -ENOMEM;
+ goto out_putdev;
+ }
+
+ err = fcoe_add_netdev_mapping(netdev, ft);
+ if (err) {
+ LIBFCOE_TRANSPORT_DBG("failed to add new netdev mapping "
+ "for FCoE transport %s for %s.\n",
+ ft->name, netdev->name);
+ rc = -ENODEV;
+ goto out_putdev;
+ }
+
+ LIBFCOE_TRANSPORT_DBG("transport %s %s to create fcoe on %s.\n",
+ ft->name, (ctlr_dev) ? "succeeded" : "failed",
+ netdev->name);
+
+out_putdev:
+ dev_put(netdev);
+out_nodev:
+ mutex_unlock(&ft_mutex);
+ if (rc)
+ return rc;
+ return count;
+}
+
+ssize_t fcoe_ctlr_destroy_store(struct bus_type *bus,
+ const char *buf, size_t count)
+{
+ int rc = -ENODEV;
+ struct net_device *netdev = NULL;
+ struct fcoe_transport *ft = NULL;
+
+ mutex_lock(&ft_mutex);
+
+ netdev = fcoe_if_to_netdev(buf);
+ if (!netdev) {
+ LIBFCOE_TRANSPORT_DBG("invalid device %s.\n", buf);
+ goto out_nodev;
+ }
+
+ ft = fcoe_netdev_map_lookup(netdev);
+ if (!ft) {
+ LIBFCOE_TRANSPORT_DBG("no FCoE transport found for %s.\n",
+ netdev->name);
+ goto out_putdev;
+ }
+
+ /* pass to transport destroy */
+ rc = ft->destroy(netdev);
+ if (rc)
+ goto out_putdev;
+
+ fcoe_del_netdev_mapping(netdev);
+ LIBFCOE_TRANSPORT_DBG("transport %s %s to destroy fcoe on %s.\n",
+ ft->name, (rc) ? "failed" : "succeeded",
+ netdev->name);
+ rc = count; /* required for successful return */
+out_putdev:
+ dev_put(netdev);
+out_nodev:
+ mutex_unlock(&ft_mutex);
+ return rc;
+}
+EXPORT_SYMBOL(fcoe_ctlr_destroy_store);
/**
* fcoe_transport_create() - Create a fcoe interface
@@ -769,11 +962,7 @@ out_putdev:
dev_put(netdev);
out_nodev:
mutex_unlock(&ft_mutex);
-
- if (rc == -ERESTARTSYS)
- return restart_syscall();
- else
- return rc;
+ return rc;
}
/**
diff --git a/drivers/scsi/fcoe/libfcoe.h b/drivers/scsi/fcoe/libfcoe.h
index 6af5fc3..d3bb16d 100644
--- a/drivers/scsi/fcoe/libfcoe.h
+++ b/drivers/scsi/fcoe/libfcoe.h
@@ -2,9 +2,10 @@
#define _FCOE_LIBFCOE_H_
extern unsigned int libfcoe_debug_logging;
-#define LIBFCOE_LOGGING 0x01 /* General logging, not categorized */
-#define LIBFCOE_FIP_LOGGING 0x02 /* FIP logging */
-#define LIBFCOE_TRANSPORT_LOGGING 0x04 /* FCoE transport logging */
+#define LIBFCOE_LOGGING 0x01 /* General logging, not categorized */
+#define LIBFCOE_FIP_LOGGING 0x02 /* FIP logging */
+#define LIBFCOE_TRANSPORT_LOGGING 0x04 /* FCoE transport logging */
+#define LIBFCOE_SYSFS_LOGGING 0x08 /* fcoe_sysfs logging */
#define LIBFCOE_CHECK_LOGGING(LEVEL, CMD) \
do { \
@@ -16,16 +17,19 @@ do { \
#define LIBFCOE_DBG(fmt, args...) \
LIBFCOE_CHECK_LOGGING(LIBFCOE_LOGGING, \
- printk(KERN_INFO "libfcoe: " fmt, ##args);)
+ pr_info("libfcoe: " fmt, ##args);)
#define LIBFCOE_FIP_DBG(fip, fmt, args...) \
LIBFCOE_CHECK_LOGGING(LIBFCOE_FIP_LOGGING, \
- printk(KERN_INFO "host%d: fip: " fmt, \
- (fip)->lp->host->host_no, ##args);)
+ pr_info("host%d: fip: " fmt, \
+ (fip)->lp->host->host_no, ##args);)
#define LIBFCOE_TRANSPORT_DBG(fmt, args...) \
LIBFCOE_CHECK_LOGGING(LIBFCOE_TRANSPORT_LOGGING, \
- printk(KERN_INFO "%s: " fmt, \
- __func__, ##args);)
+ pr_info("%s: " fmt, __func__, ##args);)
+
+#define LIBFCOE_SYSFS_DBG(cdev, fmt, args...) \
+ LIBFCOE_CHECK_LOGGING(LIBFCOE_SYSFS_LOGGING, \
+ pr_info("ctlr_%d: " fmt, cdev->id, ##args);)
#endif /* _FCOE_LIBFCOE_H_ */
diff --git a/drivers/scsi/fnic/Makefile b/drivers/scsi/fnic/Makefile
index 37c3440..383598f 100644
--- a/drivers/scsi/fnic/Makefile
+++ b/drivers/scsi/fnic/Makefile
@@ -7,6 +7,8 @@ fnic-y := \
fnic_res.o \
fnic_fcs.o \
fnic_scsi.o \
+ fnic_trace.o \
+ fnic_debugfs.o \
vnic_cq.o \
vnic_dev.o \
vnic_intr.o \
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index 95a5ba2..98436c3 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -26,6 +26,7 @@
#include <scsi/libfcoe.h>
#include "fnic_io.h"
#include "fnic_res.h"
+#include "fnic_trace.h"
#include "vnic_dev.h"
#include "vnic_wq.h"
#include "vnic_rq.h"
@@ -56,6 +57,34 @@
#define FNIC_NO_TAG -1
/*
+ * Command flags to identify the type of command and for other future
+ * use.
+ */
+#define FNIC_NO_FLAGS 0
+#define FNIC_IO_INITIALIZED BIT(0)
+#define FNIC_IO_ISSUED BIT(1)
+#define FNIC_IO_DONE BIT(2)
+#define FNIC_IO_REQ_NULL BIT(3)
+#define FNIC_IO_ABTS_PENDING BIT(4)
+#define FNIC_IO_ABORTED BIT(5)
+#define FNIC_IO_ABTS_ISSUED BIT(6)
+#define FNIC_IO_TERM_ISSUED BIT(7)
+#define FNIC_IO_INTERNAL_TERM_ISSUED BIT(8)
+#define FNIC_IO_ABT_TERM_DONE BIT(9)
+#define FNIC_IO_ABT_TERM_REQ_NULL BIT(10)
+#define FNIC_IO_ABT_TERM_TIMED_OUT BIT(11)
+#define FNIC_DEVICE_RESET BIT(12) /* Device reset request */
+#define FNIC_DEV_RST_ISSUED BIT(13)
+#define FNIC_DEV_RST_TIMED_OUT BIT(14)
+#define FNIC_DEV_RST_ABTS_ISSUED BIT(15)
+#define FNIC_DEV_RST_TERM_ISSUED BIT(16)
+#define FNIC_DEV_RST_DONE BIT(17)
+#define FNIC_DEV_RST_REQ_NULL BIT(18)
+#define FNIC_DEV_RST_ABTS_DONE BIT(19)
+#define FNIC_DEV_RST_TERM_DONE BIT(20)
+#define FNIC_DEV_RST_ABTS_PENDING BIT(21)
+
+/*
* Usage of the scsi_cmnd scratchpad.
* These fields are locked by the hashed io_req_lock.
*/
@@ -64,6 +93,7 @@
#define CMD_ABTS_STATUS(Cmnd) ((Cmnd)->SCp.Message)
#define CMD_LR_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
#define CMD_TAG(Cmnd) ((Cmnd)->SCp.sent_command)
+#define CMD_FLAGS(Cmnd) ((Cmnd)->SCp.Status)
#define FCPIO_INVALID_CODE 0x100 /* hdr_status value unused by firmware */
@@ -71,9 +101,28 @@
#define FNIC_HOST_RESET_TIMEOUT 10000 /* mSec */
#define FNIC_RMDEVICE_TIMEOUT 1000 /* mSec */
#define FNIC_HOST_RESET_SETTLE_TIME 30 /* Sec */
+#define FNIC_ABT_TERM_DELAY_TIMEOUT 500 /* mSec */
#define FNIC_MAX_FCP_TARGET 256
+/**
+ * state_flags to identify host state along along with fnic's state
+ **/
+#define __FNIC_FLAGS_FWRESET BIT(0) /* fwreset in progress */
+#define __FNIC_FLAGS_BLOCK_IO BIT(1) /* IOs are blocked */
+
+#define FNIC_FLAGS_NONE (0)
+#define FNIC_FLAGS_FWRESET (__FNIC_FLAGS_FWRESET | \
+ __FNIC_FLAGS_BLOCK_IO)
+
+#define FNIC_FLAGS_IO_BLOCKED (__FNIC_FLAGS_BLOCK_IO)
+
+#define fnic_set_state_flags(fnicp, st_flags) \
+ __fnic_set_state_flags(fnicp, st_flags, 0)
+
+#define fnic_clear_state_flags(fnicp, st_flags) \
+ __fnic_set_state_flags(fnicp, st_flags, 1)
+
extern unsigned int fnic_log_level;
#define FNIC_MAIN_LOGGING 0x01
@@ -170,6 +219,9 @@ struct fnic {
struct completion *remove_wait; /* device remove thread blocks */
+ atomic_t in_flight; /* io counter */
+ u32 _reserved; /* fill hole */
+ unsigned long state_flags; /* protected by host lock */
enum fnic_state state;
spinlock_t fnic_lock;
@@ -267,4 +319,12 @@ const char *fnic_state_to_str(unsigned int state);
void fnic_log_q_error(struct fnic *fnic);
void fnic_handle_link_event(struct fnic *fnic);
+int fnic_is_abts_pending(struct fnic *, struct scsi_cmnd *);
+
+static inline int
+fnic_chk_state_flags_locked(struct fnic *fnic, unsigned long st_flags)
+{
+ return ((fnic->state_flags & st_flags) == st_flags);
+}
+void __fnic_set_state_flags(struct fnic *, unsigned long, unsigned long);
#endif /* _FNIC_H_ */
diff --git a/drivers/scsi/fnic/fnic_debugfs.c b/drivers/scsi/fnic/fnic_debugfs.c
new file mode 100644
index 0000000..adc1f7f
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_debugfs.c
@@ -0,0 +1,314 @@
+/*
+ * Copyright 2012 Cisco Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/debugfs.h>
+#include "fnic.h"
+
+static struct dentry *fnic_trace_debugfs_root;
+static struct dentry *fnic_trace_debugfs_file;
+static struct dentry *fnic_trace_enable;
+
+/*
+ * fnic_trace_ctrl_open - Open the trace_enable file
+ * @inode: The inode pointer.
+ * @file: The file pointer to attach the trace enable/disable flag.
+ *
+ * Description:
+ * This routine opens a debugsfs file trace_enable.
+ *
+ * Returns:
+ * This function returns zero if successful.
+ */
+static int fnic_trace_ctrl_open(struct inode *inode, struct file *filp)
+{
+ filp->private_data = inode->i_private;
+ return 0;
+}
+
+/*
+ * fnic_trace_ctrl_read - Read a trace_enable debugfs file
+ * @filp: The file pointer to read from.
+ * @ubuf: The buffer to copy the data to.
+ * @cnt: The number of bytes to read.
+ * @ppos: The position in the file to start reading from.
+ *
+ * Description:
+ * This routine reads value of variable fnic_tracing_enabled
+ * and stores into local @buf. It will start reading file at @ppos and
+ * copy up to @cnt of data to @ubuf from @buf.
+ *
+ * Returns:
+ * This function returns the amount of data that was read.
+ */
+static ssize_t fnic_trace_ctrl_read(struct file *filp,
+ char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ char buf[64];
+ int len;
+ len = sprintf(buf, "%u\n", fnic_tracing_enabled);
+
+ return simple_read_from_buffer(ubuf, cnt, ppos, buf, len);
+}
+
+/*
+ * fnic_trace_ctrl_write - Write to trace_enable debugfs file
+ * @filp: The file pointer to write from.
+ * @ubuf: The buffer to copy the data from.
+ * @cnt: The number of bytes to write.
+ * @ppos: The position in the file to start writing to.
+ *
+ * Description:
+ * This routine writes data from user buffer @ubuf to buffer @buf and
+ * sets fnic_tracing_enabled value as per user input.
+ *
+ * Returns:
+ * This function returns the amount of data that was written.
+ */
+static ssize_t fnic_trace_ctrl_write(struct file *filp,
+ const char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ char buf[64];
+ unsigned long val;
+ int ret;
+
+ if (cnt >= sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(&buf, ubuf, cnt))
+ return -EFAULT;
+
+ buf[cnt] = 0;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ fnic_tracing_enabled = val;
+ (*ppos)++;
+
+ return cnt;
+}
+
+/*
+ * fnic_trace_debugfs_open - Open the fnic trace log
+ * @inode: The inode pointer
+ * @file: The file pointer to attach the log output
+ *
+ * Description:
+ * This routine is the entry point for the debugfs open file operation.
+ * It allocates the necessary buffer for the log, fills the buffer from
+ * the in-memory log and then returns a pointer to that log in
+ * the private_data field in @file.
+ *
+ * Returns:
+ * This function returns zero if successful. On error it will return
+ * a negative error value.
+ */
+static int fnic_trace_debugfs_open(struct inode *inode,
+ struct file *file)
+{
+ fnic_dbgfs_t *fnic_dbg_prt;
+ fnic_dbg_prt = kzalloc(sizeof(fnic_dbgfs_t), GFP_KERNEL);
+ if (!fnic_dbg_prt)
+ return -ENOMEM;
+
+ fnic_dbg_prt->buffer = vmalloc((3*(trace_max_pages * PAGE_SIZE)));
+ if (!fnic_dbg_prt->buffer) {
+ kfree(fnic_dbg_prt);
+ return -ENOMEM;
+ }
+ memset((void *)fnic_dbg_prt->buffer, 0,
+ (3*(trace_max_pages * PAGE_SIZE)));
+ fnic_dbg_prt->buffer_len = fnic_get_trace_data(fnic_dbg_prt);
+ file->private_data = fnic_dbg_prt;
+ return 0;
+}
+
+/*
+ * fnic_trace_debugfs_lseek - Seek through a debugfs file
+ * @file: The file pointer to seek through.
+ * @offset: The offset to seek to or the amount to seek by.
+ * @howto: Indicates how to seek.
+ *
+ * Description:
+ * This routine is the entry point for the debugfs lseek file operation.
+ * The @howto parameter indicates whether @offset is the offset to directly
+ * seek to, or if it is a value to seek forward or reverse by. This function
+ * figures out what the new offset of the debugfs file will be and assigns
+ * that value to the f_pos field of @file.
+ *
+ * Returns:
+ * This function returns the new offset if successful and returns a negative
+ * error if unable to process the seek.
+ */
+static loff_t fnic_trace_debugfs_lseek(struct file *file,
+ loff_t offset,
+ int howto)
+{
+ fnic_dbgfs_t *fnic_dbg_prt = file->private_data;
+ loff_t pos = -1;
+
+ switch (howto) {
+ case 0:
+ pos = offset;
+ break;
+ case 1:
+ pos = file->f_pos + offset;
+ break;
+ case 2:
+ pos = fnic_dbg_prt->buffer_len - offset;
+ }
+ return (pos < 0 || pos > fnic_dbg_prt->buffer_len) ?
+ -EINVAL : (file->f_pos = pos);
+}
+
+/*
+ * fnic_trace_debugfs_read - Read a debugfs file
+ * @file: The file pointer to read from.
+ * @ubuf: The buffer to copy the data to.
+ * @nbytes: The number of bytes to read.
+ * @pos: The position in the file to start reading from.
+ *
+ * Description:
+ * This routine reads data from the buffer indicated in the private_data
+ * field of @file. It will start reading at @pos and copy up to @nbytes of
+ * data to @ubuf.
+ *
+ * Returns:
+ * This function returns the amount of data that was read (this could be
+ * less than @nbytes if the end of the file was reached).
+ */
+static ssize_t fnic_trace_debugfs_read(struct file *file,
+ char __user *ubuf,
+ size_t nbytes,
+ loff_t *pos)
+{
+ fnic_dbgfs_t *fnic_dbg_prt = file->private_data;
+ int rc = 0;
+ rc = simple_read_from_buffer(ubuf, nbytes, pos,
+ fnic_dbg_prt->buffer,
+ fnic_dbg_prt->buffer_len);
+ return rc;
+}
+
+/*
+ * fnic_trace_debugfs_release - Release the buffer used to store
+ * debugfs file data
+ * @inode: The inode pointer
+ * @file: The file pointer that contains the buffer to release
+ *
+ * Description:
+ * This routine frees the buffer that was allocated when the debugfs
+ * file was opened.
+ *
+ * Returns:
+ * This function returns zero.
+ */
+static int fnic_trace_debugfs_release(struct inode *inode,
+ struct file *file)
+{
+ fnic_dbgfs_t *fnic_dbg_prt = file->private_data;
+
+ vfree(fnic_dbg_prt->buffer);
+ kfree(fnic_dbg_prt);
+ return 0;
+}
+
+static const struct file_operations fnic_trace_ctrl_fops = {
+ .owner = THIS_MODULE,
+ .open = fnic_trace_ctrl_open,
+ .read = fnic_trace_ctrl_read,
+ .write = fnic_trace_ctrl_write,
+};
+
+static const struct file_operations fnic_trace_debugfs_fops = {
+ .owner = THIS_MODULE,
+ .open = fnic_trace_debugfs_open,
+ .llseek = fnic_trace_debugfs_lseek,
+ .read = fnic_trace_debugfs_read,
+ .release = fnic_trace_debugfs_release,
+};
+
+/*
+ * fnic_trace_debugfs_init - Initialize debugfs for fnic trace logging
+ *
+ * Description:
+ * When Debugfs is configured this routine sets up the fnic debugfs
+ * file system. If not already created, this routine will create the
+ * fnic directory. It will create file trace to log fnic trace buffer
+ * output into debugfs and it will also create file trace_enable to
+ * control enable/disable of trace logging into trace buffer.
+ */
+int fnic_trace_debugfs_init(void)
+{
+ int rc = -1;
+ fnic_trace_debugfs_root = debugfs_create_dir("fnic", NULL);
+ if (!fnic_trace_debugfs_root) {
+ printk(KERN_DEBUG "Cannot create debugfs root\n");
+ return rc;
+ }
+ fnic_trace_enable = debugfs_create_file("tracing_enable",
+ S_IFREG|S_IRUGO|S_IWUSR,
+ fnic_trace_debugfs_root,
+ NULL, &fnic_trace_ctrl_fops);
+
+ if (!fnic_trace_enable) {
+ printk(KERN_DEBUG "Cannot create trace_enable file"
+ " under debugfs");
+ return rc;
+ }
+
+ fnic_trace_debugfs_file = debugfs_create_file("trace",
+ S_IFREG|S_IRUGO|S_IWUSR,
+ fnic_trace_debugfs_root,
+ NULL,
+ &fnic_trace_debugfs_fops);
+
+ if (!fnic_trace_debugfs_file) {
+ printk(KERN_DEBUG "Cannot create trace file under debugfs");
+ return rc;
+ }
+ rc = 0;
+ return rc;
+}
+
+/*
+ * fnic_trace_debugfs_terminate - Tear down debugfs infrastructure
+ *
+ * Description:
+ * When Debugfs is configured this routine removes debugfs file system
+ * elements that are specific to fnic trace logging.
+ */
+void fnic_trace_debugfs_terminate(void)
+{
+ if (fnic_trace_debugfs_file) {
+ debugfs_remove(fnic_trace_debugfs_file);
+ fnic_trace_debugfs_file = NULL;
+ }
+ if (fnic_trace_enable) {
+ debugfs_remove(fnic_trace_enable);
+ fnic_trace_enable = NULL;
+ }
+ if (fnic_trace_debugfs_root) {
+ debugfs_remove(fnic_trace_debugfs_root);
+ fnic_trace_debugfs_root = NULL;
+ }
+}
diff --git a/drivers/scsi/fnic/fnic_io.h b/drivers/scsi/fnic/fnic_io.h
index f0b8969..c35b8f1 100644
--- a/drivers/scsi/fnic/fnic_io.h
+++ b/drivers/scsi/fnic/fnic_io.h
@@ -21,7 +21,7 @@
#include <scsi/fc/fc_fcp.h>
#define FNIC_DFLT_SG_DESC_CNT 32
-#define FNIC_MAX_SG_DESC_CNT 1024 /* Maximum descriptors per sgl */
+#define FNIC_MAX_SG_DESC_CNT 256 /* Maximum descriptors per sgl */
#define FNIC_SG_DESC_ALIGN 16 /* Descriptor address alignment */
struct host_sg_desc {
@@ -45,7 +45,8 @@ enum fnic_sgl_list_type {
};
enum fnic_ioreq_state {
- FNIC_IOREQ_CMD_PENDING = 0,
+ FNIC_IOREQ_NOT_INITED = 0,
+ FNIC_IOREQ_CMD_PENDING,
FNIC_IOREQ_ABTS_PENDING,
FNIC_IOREQ_ABTS_COMPLETE,
FNIC_IOREQ_CMD_COMPLETE,
@@ -60,6 +61,7 @@ struct fnic_io_req {
u8 sgl_type; /* device DMA descriptor list type */
u8 io_completed:1; /* set to 1 when fw completes IO */
u32 port_id; /* remote port DID */
+ unsigned long start_time; /* in jiffies */
struct completion *abts_done; /* completion for abts */
struct completion *dr_done; /* completion for device reset */
};
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index fbf3ac6..d601ac5 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -68,6 +68,10 @@ unsigned int fnic_log_level;
module_param(fnic_log_level, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(fnic_log_level, "bit mask of fnic logging levels");
+unsigned int fnic_trace_max_pages = 16;
+module_param(fnic_trace_max_pages, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(fnic_trace_max_pages, "Total allocated memory pages "
+ "for fnic trace buffer");
static struct libfc_function_template fnic_transport_template = {
.frame_send = fnic_send,
@@ -624,6 +628,9 @@ static int fnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
fnic->state = FNIC_IN_FC_MODE;
+ atomic_set(&fnic->in_flight, 0);
+ fnic->state_flags = FNIC_FLAGS_NONE;
+
/* Enable hardware stripping of vlan header on ingress */
fnic_set_nic_config(fnic, 0, 0, 0, 0, 0, 0, 1);
@@ -858,6 +865,14 @@ static int __init fnic_init_module(void)
printk(KERN_INFO PFX "%s, ver %s\n", DRV_DESCRIPTION, DRV_VERSION);
+ /* Allocate memory for trace buffer */
+ err = fnic_trace_buf_init();
+ if (err < 0) {
+ printk(KERN_ERR PFX "Trace buffer initialization Failed "
+ "Fnic Tracing utility is disabled\n");
+ fnic_trace_free();
+ }
+
/* Create a cache for allocation of default size sgls */
len = sizeof(struct fnic_dflt_sgl_list);
fnic_sgl_cache[FNIC_SGL_CACHE_DFLT] = kmem_cache_create
@@ -928,6 +943,7 @@ err_create_fnic_ioreq_slab:
err_create_fnic_sgl_slab_max:
kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
err_create_fnic_sgl_slab_dflt:
+ fnic_trace_free();
return err;
}
@@ -939,6 +955,7 @@ static void __exit fnic_cleanup_module(void)
kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
kmem_cache_destroy(fnic_io_req_cache);
fc_release_transport(fnic_fc_transport);
+ fnic_trace_free();
}
module_init(fnic_init_module);
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index c40ce52..be99e75 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -47,6 +47,7 @@ const char *fnic_state_str[] = {
};
static const char *fnic_ioreq_state_str[] = {
+ [FNIC_IOREQ_NOT_INITED] = "FNIC_IOREQ_NOT_INITED",
[FNIC_IOREQ_CMD_PENDING] = "FNIC_IOREQ_CMD_PENDING",
[FNIC_IOREQ_ABTS_PENDING] = "FNIC_IOREQ_ABTS_PENDING",
[FNIC_IOREQ_ABTS_COMPLETE] = "FNIC_IOREQ_ABTS_COMPLETE",
@@ -165,6 +166,33 @@ static int free_wq_copy_descs(struct fnic *fnic, struct vnic_wq_copy *wq)
}
+/**
+ * __fnic_set_state_flags
+ * Sets/Clears bits in fnic's state_flags
+ **/
+void
+__fnic_set_state_flags(struct fnic *fnic, unsigned long st_flags,
+ unsigned long clearbits)
+{
+ struct Scsi_Host *host = fnic->lport->host;
+ int sh_locked = spin_is_locked(host->host_lock);
+ unsigned long flags = 0;
+
+ if (!sh_locked)
+ spin_lock_irqsave(host->host_lock, flags);
+
+ if (clearbits)
+ fnic->state_flags &= ~st_flags;
+ else
+ fnic->state_flags |= st_flags;
+
+ if (!sh_locked)
+ spin_unlock_irqrestore(host->host_lock, flags);
+
+ return;
+}
+
+
/*
* fnic_fw_reset_handler
* Routine to send reset msg to fw
@@ -175,9 +203,16 @@ int fnic_fw_reset_handler(struct fnic *fnic)
int ret = 0;
unsigned long flags;
+ /* indicate fwreset to io path */
+ fnic_set_state_flags(fnic, FNIC_FLAGS_FWRESET);
+
skb_queue_purge(&fnic->frame_queue);
skb_queue_purge(&fnic->tx_queue);
+ /* wait for io cmpl */
+ while (atomic_read(&fnic->in_flight))
+ schedule_timeout(msecs_to_jiffies(1));
+
spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
@@ -193,9 +228,12 @@ int fnic_fw_reset_handler(struct fnic *fnic)
if (!ret)
FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
"Issued fw reset\n");
- else
+ else {
+ fnic_clear_state_flags(fnic, FNIC_FLAGS_FWRESET);
FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
"Failed to issue fw reset\n");
+ }
+
return ret;
}
@@ -312,6 +350,8 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
if (unlikely(!vnic_wq_copy_desc_avail(wq))) {
spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+ FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+ "fnic_queue_wq_copy_desc failure - no descriptors\n");
return SCSI_MLQUEUE_HOST_BUSY;
}
@@ -351,16 +391,20 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
*/
static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
{
- struct fc_lport *lp;
+ struct fc_lport *lp = shost_priv(sc->device->host);
struct fc_rport *rport;
- struct fnic_io_req *io_req;
- struct fnic *fnic;
+ struct fnic_io_req *io_req = NULL;
+ struct fnic *fnic = lport_priv(lp);
struct vnic_wq_copy *wq;
int ret;
- int sg_count;
+ u64 cmd_trace;
+ int sg_count = 0;
unsigned long flags;
unsigned long ptr;
+ if (unlikely(fnic_chk_state_flags_locked(fnic, FNIC_FLAGS_IO_BLOCKED)))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
rport = starget_to_rport(scsi_target(sc->device));
ret = fc_remote_port_chkready(rport);
if (ret) {
@@ -369,20 +413,21 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
return 0;
}
- lp = shost_priv(sc->device->host);
if (lp->state != LPORT_ST_READY || !(lp->link_up))
return SCSI_MLQUEUE_HOST_BUSY;
+ atomic_inc(&fnic->in_flight);
+
/*
* Release host lock, use driver resource specific locks from here.
* Don't re-enable interrupts in case they were disabled prior to the
* caller disabling them.
*/
spin_unlock(lp->host->host_lock);
+ CMD_STATE(sc) = FNIC_IOREQ_NOT_INITED;
+ CMD_FLAGS(sc) = FNIC_NO_FLAGS;
/* Get a new io_req for this SCSI IO */
- fnic = lport_priv(lp);
-
io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC);
if (!io_req) {
ret = SCSI_MLQUEUE_HOST_BUSY;
@@ -393,6 +438,9 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
/* Map the data buffer */
sg_count = scsi_dma_map(sc);
if (sg_count < 0) {
+ FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no,
+ sc->request->tag, sc, 0, sc->cmnd[0],
+ sg_count, CMD_STATE(sc));
mempool_free(io_req, fnic->io_req_pool);
goto out;
}
@@ -427,8 +475,10 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
/* initialize rest of io_req */
io_req->port_id = rport->port_id;
+ io_req->start_time = jiffies;
CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING;
CMD_SP(sc) = (char *)io_req;
+ CMD_FLAGS(sc) |= FNIC_IO_INITIALIZED;
sc->scsi_done = done;
/* create copy wq desc and enqueue it */
@@ -440,7 +490,9 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
* refetch the pointer under the lock.
*/
spinlock_t *io_lock = fnic_io_lock_hash(fnic, sc);
-
+ FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no,
+ sc->request->tag, sc, 0, 0, 0,
+ (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
spin_lock_irqsave(io_lock, flags);
io_req = (struct fnic_io_req *)CMD_SP(sc);
CMD_SP(sc) = NULL;
@@ -450,8 +502,21 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
fnic_release_ioreq_buf(fnic, io_req, sc);
mempool_free(io_req, fnic->io_req_pool);
}
+ } else {
+ /* REVISIT: Use per IO lock in the final code */
+ CMD_FLAGS(sc) |= FNIC_IO_ISSUED;
}
out:
+ cmd_trace = ((u64)sc->cmnd[0] << 56 | (u64)sc->cmnd[7] << 40 |
+ (u64)sc->cmnd[8] << 32 | (u64)sc->cmnd[2] << 24 |
+ (u64)sc->cmnd[3] << 16 | (u64)sc->cmnd[4] << 8 |
+ sc->cmnd[5]);
+
+ FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no,
+ sc->request->tag, sc, io_req,
+ sg_count, cmd_trace,
+ (((u64)CMD_FLAGS(sc) >> 32) | CMD_STATE(sc)));
+ atomic_dec(&fnic->in_flight);
/* acquire host lock before returning to SCSI */
spin_lock(lp->host->host_lock);
return ret;
@@ -529,6 +594,8 @@ static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic,
fnic_flush_tx(fnic);
reset_cmpl_handler_end:
+ fnic_clear_state_flags(fnic, FNIC_FLAGS_FWRESET);
+
return ret;
}
@@ -622,6 +689,7 @@ static inline void fnic_fcpio_ack_handler(struct fnic *fnic,
struct vnic_wq_copy *wq;
u16 request_out = desc->u.ack.request_out;
unsigned long flags;
+ u64 *ox_id_tag = (u64 *)(void *)desc;
/* mark the ack state */
wq = &fnic->wq_copy[cq_index - fnic->raw_wq_count - fnic->rq_count];
@@ -632,6 +700,9 @@ static inline void fnic_fcpio_ack_handler(struct fnic *fnic,
fnic->fw_ack_recd[0] = 1;
}
spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+ FNIC_TRACE(fnic_fcpio_ack_handler,
+ fnic->lport->host->host_no, 0, 0, ox_id_tag[2], ox_id_tag[3],
+ ox_id_tag[4], ox_id_tag[5]);
}
/*
@@ -651,27 +722,53 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic,
struct scsi_cmnd *sc;
unsigned long flags;
spinlock_t *io_lock;
+ u64 cmd_trace;
+ unsigned long start_time;
/* Decode the cmpl description to get the io_req id */
fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
fcpio_tag_id_dec(&tag, &id);
+ icmnd_cmpl = &desc->u.icmnd_cmpl;
- if (id >= FNIC_MAX_IO_REQ)
+ if (id >= FNIC_MAX_IO_REQ) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Tag out of range tag %x hdr status = %s\n",
+ id, fnic_fcpio_status_to_str(hdr_status));
return;
+ }
sc = scsi_host_find_tag(fnic->lport->host, id);
WARN_ON_ONCE(!sc);
- if (!sc)
+ if (!sc) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "icmnd_cmpl sc is null - "
+ "hdr status = %s tag = 0x%x desc = 0x%p\n",
+ fnic_fcpio_status_to_str(hdr_status), id, desc);
+ FNIC_TRACE(fnic_fcpio_icmnd_cmpl_handler,
+ fnic->lport->host->host_no, id,
+ ((u64)icmnd_cmpl->_resvd0[1] << 16 |
+ (u64)icmnd_cmpl->_resvd0[0]),
+ ((u64)hdr_status << 16 |
+ (u64)icmnd_cmpl->scsi_status << 8 |
+ (u64)icmnd_cmpl->flags), desc,
+ (u64)icmnd_cmpl->residual, 0);
return;
+ }
io_lock = fnic_io_lock_hash(fnic, sc);
spin_lock_irqsave(io_lock, flags);
io_req = (struct fnic_io_req *)CMD_SP(sc);
WARN_ON_ONCE(!io_req);
if (!io_req) {
+ CMD_FLAGS(sc) |= FNIC_IO_REQ_NULL;
spin_unlock_irqrestore(io_lock, flags);
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "icmnd_cmpl io_req is null - "
+ "hdr status = %s tag = 0x%x sc 0x%p\n",
+ fnic_fcpio_status_to_str(hdr_status), id, sc);
return;
}
+ start_time = io_req->start_time;
/* firmware completed the io */
io_req->io_completed = 1;
@@ -682,6 +779,28 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic,
*/
if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
spin_unlock_irqrestore(io_lock, flags);
+ CMD_FLAGS(sc) |= FNIC_IO_ABTS_PENDING;
+ switch (hdr_status) {
+ case FCPIO_SUCCESS:
+ CMD_FLAGS(sc) |= FNIC_IO_DONE;
+ FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+ "icmnd_cmpl ABTS pending hdr status = %s "
+ "sc 0x%p scsi_status %x residual %d\n",
+ fnic_fcpio_status_to_str(hdr_status), sc,
+ icmnd_cmpl->scsi_status,
+ icmnd_cmpl->residual);
+ break;
+ case FCPIO_ABORTED:
+ CMD_FLAGS(sc) |= FNIC_IO_ABORTED;
+ break;
+ default:
+ FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+ "icmnd_cmpl abts pending "
+ "hdr status = %s tag = 0x%x sc = 0x%p\n",
+ fnic_fcpio_status_to_str(hdr_status),
+ id, sc);
+ break;
+ }
return;
}
@@ -765,6 +884,7 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic,
/* Break link with the SCSI command */
CMD_SP(sc) = NULL;
+ CMD_FLAGS(sc) |= FNIC_IO_DONE;
spin_unlock_irqrestore(io_lock, flags);
@@ -772,6 +892,20 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic,
mempool_free(io_req, fnic->io_req_pool);
+ cmd_trace = ((u64)hdr_status << 56) |
+ (u64)icmnd_cmpl->scsi_status << 48 |
+ (u64)icmnd_cmpl->flags << 40 | (u64)sc->cmnd[0] << 32 |
+ (u64)sc->cmnd[2] << 24 | (u64)sc->cmnd[3] << 16 |
+ (u64)sc->cmnd[4] << 8 | sc->cmnd[5];
+
+ FNIC_TRACE(fnic_fcpio_icmnd_cmpl_handler,
+ sc->device->host->host_no, id, sc,
+ ((u64)icmnd_cmpl->_resvd0[1] << 56 |
+ (u64)icmnd_cmpl->_resvd0[0] << 48 |
+ jiffies_to_msecs(jiffies - start_time)),
+ desc, cmd_trace,
+ (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
+
if (sc->sc_data_direction == DMA_FROM_DEVICE) {
fnic->lport->host_stats.fcp_input_requests++;
fnic->fcp_input_bytes += xfer_len;
@@ -784,7 +918,6 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic,
/* Call SCSI completion function to complete the IO */
if (sc->scsi_done)
sc->scsi_done(sc);
-
}
/* fnic_fcpio_itmf_cmpl_handler
@@ -801,28 +934,54 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic,
struct fnic_io_req *io_req;
unsigned long flags;
spinlock_t *io_lock;
+ unsigned long start_time;
fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
fcpio_tag_id_dec(&tag, &id);
- if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ)
+ if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Tag out of range tag %x hdr status = %s\n",
+ id, fnic_fcpio_status_to_str(hdr_status));
return;
+ }
sc = scsi_host_find_tag(fnic->lport->host, id & FNIC_TAG_MASK);
WARN_ON_ONCE(!sc);
- if (!sc)
+ if (!sc) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "itmf_cmpl sc is null - hdr status = %s tag = 0x%x\n",
+ fnic_fcpio_status_to_str(hdr_status), id);
return;
-
+ }
io_lock = fnic_io_lock_hash(fnic, sc);
spin_lock_irqsave(io_lock, flags);
io_req = (struct fnic_io_req *)CMD_SP(sc);
WARN_ON_ONCE(!io_req);
if (!io_req) {
spin_unlock_irqrestore(io_lock, flags);
+ CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_REQ_NULL;
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "itmf_cmpl io_req is null - "
+ "hdr status = %s tag = 0x%x sc 0x%p\n",
+ fnic_fcpio_status_to_str(hdr_status), id, sc);
return;
}
+ start_time = io_req->start_time;
- if (id & FNIC_TAG_ABORT) {
+ if ((id & FNIC_TAG_ABORT) && (id & FNIC_TAG_DEV_RST)) {
+ /* Abort and terminate completion of device reset req */
+ /* REVISIT : Add asserts about various flags */
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "dev reset abts cmpl recd. id %x status %s\n",
+ id, fnic_fcpio_status_to_str(hdr_status));
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
+ CMD_ABTS_STATUS(sc) = hdr_status;
+ CMD_FLAGS(sc) |= FNIC_DEV_RST_DONE;
+ if (io_req->abts_done)
+ complete(io_req->abts_done);
+ spin_unlock_irqrestore(io_lock, flags);
+ } else if (id & FNIC_TAG_ABORT) {
/* Completion of abort cmd */
if (CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING) {
/* This is a late completion. Ignore it */
@@ -832,6 +991,7 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic,
CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
CMD_ABTS_STATUS(sc) = hdr_status;
+ CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_DONE;
FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
"abts cmpl recd. id %d status %s\n",
(int)(id & FNIC_TAG_MASK),
@@ -855,14 +1015,58 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic,
fnic_release_ioreq_buf(fnic, io_req, sc);
mempool_free(io_req, fnic->io_req_pool);
- if (sc->scsi_done)
+ if (sc->scsi_done) {
+ FNIC_TRACE(fnic_fcpio_itmf_cmpl_handler,
+ sc->device->host->host_no, id,
+ sc,
+ jiffies_to_msecs(jiffies - start_time),
+ desc,
+ (((u64)hdr_status << 40) |
+ (u64)sc->cmnd[0] << 32 |
+ (u64)sc->cmnd[2] << 24 |
+ (u64)sc->cmnd[3] << 16 |
+ (u64)sc->cmnd[4] << 8 | sc->cmnd[5]),
+ (((u64)CMD_FLAGS(sc) << 32) |
+ CMD_STATE(sc)));
sc->scsi_done(sc);
+ }
}
} else if (id & FNIC_TAG_DEV_RST) {
/* Completion of device reset */
CMD_LR_STATUS(sc) = hdr_status;
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ CMD_FLAGS(sc) |= FNIC_DEV_RST_ABTS_PENDING;
+ FNIC_TRACE(fnic_fcpio_itmf_cmpl_handler,
+ sc->device->host->host_no, id, sc,
+ jiffies_to_msecs(jiffies - start_time),
+ desc, 0,
+ (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Terminate pending "
+ "dev reset cmpl recd. id %d status %s\n",
+ (int)(id & FNIC_TAG_MASK),
+ fnic_fcpio_status_to_str(hdr_status));
+ return;
+ }
+ if (CMD_FLAGS(sc) & FNIC_DEV_RST_TIMED_OUT) {
+ /* Need to wait for terminate completion */
+ spin_unlock_irqrestore(io_lock, flags);
+ FNIC_TRACE(fnic_fcpio_itmf_cmpl_handler,
+ sc->device->host->host_no, id, sc,
+ jiffies_to_msecs(jiffies - start_time),
+ desc, 0,
+ (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "dev reset cmpl recd after time out. "
+ "id %d status %s\n",
+ (int)(id & FNIC_TAG_MASK),
+ fnic_fcpio_status_to_str(hdr_status));
+ return;
+ }
CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+ CMD_FLAGS(sc) |= FNIC_DEV_RST_DONE;
FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
"dev reset cmpl recd. id %d status %s\n",
(int)(id & FNIC_TAG_MASK),
@@ -889,7 +1093,6 @@ static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev,
struct fcpio_fw_req *desc)
{
struct fnic *fnic = vnic_dev_priv(vdev);
- int ret = 0;
switch (desc->hdr.type) {
case FCPIO_ACK: /* fw copied copy wq desc to its queue */
@@ -906,11 +1109,11 @@ static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev,
case FCPIO_FLOGI_REG_CMPL: /* fw completed flogi_reg */
case FCPIO_FLOGI_FIP_REG_CMPL: /* fw completed flogi_fip_reg */
- ret = fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc);
+ fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc);
break;
case FCPIO_RESET_CMPL: /* fw completed reset */
- ret = fnic_fcpio_fw_reset_cmpl_handler(fnic, desc);
+ fnic_fcpio_fw_reset_cmpl_handler(fnic, desc);
break;
default:
@@ -920,7 +1123,7 @@ static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev,
break;
}
- return ret;
+ return 0;
}
/*
@@ -950,6 +1153,7 @@ static void fnic_cleanup_io(struct fnic *fnic, int exclude_id)
unsigned long flags = 0;
struct scsi_cmnd *sc;
spinlock_t *io_lock;
+ unsigned long start_time = 0;
for (i = 0; i < FNIC_MAX_IO_REQ; i++) {
if (i == exclude_id)
@@ -962,6 +1166,23 @@ static void fnic_cleanup_io(struct fnic *fnic, int exclude_id)
io_lock = fnic_io_lock_hash(fnic, sc);
spin_lock_irqsave(io_lock, flags);
io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) &&
+ !(CMD_FLAGS(sc) & FNIC_DEV_RST_DONE)) {
+ /*
+ * We will be here only when FW completes reset
+ * without sending completions for outstanding ios.
+ */
+ CMD_FLAGS(sc) |= FNIC_DEV_RST_DONE;
+ if (io_req && io_req->dr_done)
+ complete(io_req->dr_done);
+ else if (io_req && io_req->abts_done)
+ complete(io_req->abts_done);
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ } else if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
if (!io_req) {
spin_unlock_irqrestore(io_lock, flags);
goto cleanup_scsi_cmd;
@@ -975,6 +1196,7 @@ static void fnic_cleanup_io(struct fnic *fnic, int exclude_id)
* If there is a scsi_cmnd associated with this io_req, then
* free the corresponding state
*/
+ start_time = io_req->start_time;
fnic_release_ioreq_buf(fnic, io_req, sc);
mempool_free(io_req, fnic->io_req_pool);
@@ -984,8 +1206,18 @@ cleanup_scsi_cmd:
" DID_TRANSPORT_DISRUPTED\n");
/* Complete the command to SCSI */
- if (sc->scsi_done)
+ if (sc->scsi_done) {
+ FNIC_TRACE(fnic_cleanup_io,
+ sc->device->host->host_no, i, sc,
+ jiffies_to_msecs(jiffies - start_time),
+ 0, ((u64)sc->cmnd[0] << 32 |
+ (u64)sc->cmnd[2] << 24 |
+ (u64)sc->cmnd[3] << 16 |
+ (u64)sc->cmnd[4] << 8 | sc->cmnd[5]),
+ (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
+
sc->scsi_done(sc);
+ }
}
}
@@ -998,6 +1230,7 @@ void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
struct scsi_cmnd *sc;
unsigned long flags;
spinlock_t *io_lock;
+ unsigned long start_time = 0;
/* get the tag reference */
fcpio_tag_id_dec(&desc->hdr.tag, &id);
@@ -1027,6 +1260,7 @@ void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
spin_unlock_irqrestore(io_lock, flags);
+ start_time = io_req->start_time;
fnic_release_ioreq_buf(fnic, io_req, sc);
mempool_free(io_req, fnic->io_req_pool);
@@ -1035,8 +1269,17 @@ wq_copy_cleanup_scsi_cmd:
FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "wq_copy_cleanup_handler:"
" DID_NO_CONNECT\n");
- if (sc->scsi_done)
+ if (sc->scsi_done) {
+ FNIC_TRACE(fnic_wq_copy_cleanup_handler,
+ sc->device->host->host_no, id, sc,
+ jiffies_to_msecs(jiffies - start_time),
+ 0, ((u64)sc->cmnd[0] << 32 |
+ (u64)sc->cmnd[2] << 24 | (u64)sc->cmnd[3] << 16 |
+ (u64)sc->cmnd[4] << 8 | sc->cmnd[5]),
+ (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
+
sc->scsi_done(sc);
+ }
}
static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag,
@@ -1044,8 +1287,18 @@ static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag,
struct fnic_io_req *io_req)
{
struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ struct Scsi_Host *host = fnic->lport->host;
unsigned long flags;
+ spin_lock_irqsave(host->host_lock, flags);
+ if (unlikely(fnic_chk_state_flags_locked(fnic,
+ FNIC_FLAGS_IO_BLOCKED))) {
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ } else
+ atomic_inc(&fnic->in_flight);
+ spin_unlock_irqrestore(host->host_lock, flags);
+
spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
@@ -1053,6 +1306,9 @@ static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag,
if (!vnic_wq_copy_desc_avail(wq)) {
spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+ atomic_dec(&fnic->in_flight);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_queue_abort_io_req: failure: no descriptors\n");
return 1;
}
fnic_queue_wq_copy_desc_itmf(wq, tag | FNIC_TAG_ABORT,
@@ -1060,12 +1316,15 @@ static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag,
fnic->config.ra_tov, fnic->config.ed_tov);
spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+ atomic_dec(&fnic->in_flight);
+
return 0;
}
-void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
+static void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
{
int tag;
+ int abt_tag;
struct fnic_io_req *io_req;
spinlock_t *io_lock;
unsigned long flags;
@@ -1075,13 +1334,14 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
FNIC_SCSI_DBG(KERN_DEBUG,
fnic->lport->host,
- "fnic_rport_reset_exch called portid 0x%06x\n",
+ "fnic_rport_exch_reset called portid 0x%06x\n",
port_id);
if (fnic->in_remove)
return;
for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+ abt_tag = tag;
sc = scsi_host_find_tag(fnic->lport->host, tag);
if (!sc)
continue;
@@ -1096,6 +1356,15 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
continue;
}
+ if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) &&
+ (!(CMD_FLAGS(sc) & FNIC_DEV_RST_ISSUED))) {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_rport_exch_reset dev rst not pending sc 0x%p\n",
+ sc);
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+
/*
* Found IO that is still pending with firmware and
* belongs to rport that went away
@@ -1104,9 +1373,29 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
spin_unlock_irqrestore(io_lock, flags);
continue;
}
+ if (io_req->abts_done) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "fnic_rport_exch_reset: io_req->abts_done is set "
+ "state is %s\n",
+ fnic_ioreq_state_to_str(CMD_STATE(sc)));
+ }
+
+ if (!(CMD_FLAGS(sc) & FNIC_IO_ISSUED)) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "rport_exch_reset "
+ "IO not yet issued %p tag 0x%x flags "
+ "%x state %d\n",
+ sc, tag, CMD_FLAGS(sc), CMD_STATE(sc));
+ }
old_ioreq_state = CMD_STATE(sc);
CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+ if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) {
+ abt_tag = (tag | FNIC_TAG_DEV_RST);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_rport_exch_reset dev rst sc 0x%p\n",
+ sc);
+ }
BUG_ON(io_req->abts_done);
@@ -1118,7 +1407,7 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
/* Now queue the abort command to firmware */
int_to_scsilun(sc->device->lun, &fc_lun);
- if (fnic_queue_abort_io_req(fnic, tag,
+ if (fnic_queue_abort_io_req(fnic, abt_tag,
FCPIO_ITMF_ABT_TASK_TERM,
fc_lun.scsi_lun, io_req)) {
/*
@@ -1127,12 +1416,17 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
* aborted later by scsi_eh, or cleaned up during
* lun reset
*/
- io_lock = fnic_io_lock_hash(fnic, sc);
-
spin_lock_irqsave(io_lock, flags);
if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
CMD_STATE(sc) = old_ioreq_state;
spin_unlock_irqrestore(io_lock, flags);
+ } else {
+ spin_lock_irqsave(io_lock, flags);
+ if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET)
+ CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED;
+ else
+ CMD_FLAGS(sc) |= FNIC_IO_INTERNAL_TERM_ISSUED;
+ spin_unlock_irqrestore(io_lock, flags);
}
}
@@ -1141,6 +1435,7 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
void fnic_terminate_rport_io(struct fc_rport *rport)
{
int tag;
+ int abt_tag;
struct fnic_io_req *io_req;
spinlock_t *io_lock;
unsigned long flags;
@@ -1154,14 +1449,15 @@ void fnic_terminate_rport_io(struct fc_rport *rport)
FNIC_SCSI_DBG(KERN_DEBUG,
fnic->lport->host, "fnic_terminate_rport_io called"
- " wwpn 0x%llx, wwnn0x%llx, portid 0x%06x\n",
- rport->port_name, rport->node_name,
+ " wwpn 0x%llx, wwnn0x%llx, rport 0x%p, portid 0x%06x\n",
+ rport->port_name, rport->node_name, rport,
rport->port_id);
if (fnic->in_remove)
return;
for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+ abt_tag = tag;
sc = scsi_host_find_tag(fnic->lport->host, tag);
if (!sc)
continue;
@@ -1180,6 +1476,14 @@ void fnic_terminate_rport_io(struct fc_rport *rport)
continue;
}
+ if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) &&
+ (!(CMD_FLAGS(sc) & FNIC_DEV_RST_ISSUED))) {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_terminate_rport_io dev rst not pending sc 0x%p\n",
+ sc);
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
/*
* Found IO that is still pending with firmware and
* belongs to rport that went away
@@ -1188,9 +1492,27 @@ void fnic_terminate_rport_io(struct fc_rport *rport)
spin_unlock_irqrestore(io_lock, flags);
continue;
}
+ if (io_req->abts_done) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "fnic_terminate_rport_io: io_req->abts_done is set "
+ "state is %s\n",
+ fnic_ioreq_state_to_str(CMD_STATE(sc)));
+ }
+ if (!(CMD_FLAGS(sc) & FNIC_IO_ISSUED)) {
+ FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+ "fnic_terminate_rport_io "
+ "IO not yet issued %p tag 0x%x flags "
+ "%x state %d\n",
+ sc, tag, CMD_FLAGS(sc), CMD_STATE(sc));
+ }
old_ioreq_state = CMD_STATE(sc);
CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+ if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) {
+ abt_tag = (tag | FNIC_TAG_DEV_RST);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_terminate_rport_io dev rst sc 0x%p\n", sc);
+ }
BUG_ON(io_req->abts_done);
@@ -1203,7 +1525,7 @@ void fnic_terminate_rport_io(struct fc_rport *rport)
/* Now queue the abort command to firmware */
int_to_scsilun(sc->device->lun, &fc_lun);
- if (fnic_queue_abort_io_req(fnic, tag,
+ if (fnic_queue_abort_io_req(fnic, abt_tag,
FCPIO_ITMF_ABT_TASK_TERM,
fc_lun.scsi_lun, io_req)) {
/*
@@ -1212,12 +1534,17 @@ void fnic_terminate_rport_io(struct fc_rport *rport)
* aborted later by scsi_eh, or cleaned up during
* lun reset
*/
- io_lock = fnic_io_lock_hash(fnic, sc);
-
spin_lock_irqsave(io_lock, flags);
if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
CMD_STATE(sc) = old_ioreq_state;
spin_unlock_irqrestore(io_lock, flags);
+ } else {
+ spin_lock_irqsave(io_lock, flags);
+ if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET)
+ CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED;
+ else
+ CMD_FLAGS(sc) |= FNIC_IO_INTERNAL_TERM_ISSUED;
+ spin_unlock_irqrestore(io_lock, flags);
}
}
@@ -1232,13 +1559,15 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
{
struct fc_lport *lp;
struct fnic *fnic;
- struct fnic_io_req *io_req;
+ struct fnic_io_req *io_req = NULL;
struct fc_rport *rport;
spinlock_t *io_lock;
unsigned long flags;
+ unsigned long start_time = 0;
int ret = SUCCESS;
- u32 task_req;
+ u32 task_req = 0;
struct scsi_lun fc_lun;
+ int tag;
DECLARE_COMPLETION_ONSTACK(tm_done);
/* Wait for rport to unblock */
@@ -1249,9 +1578,13 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
fnic = lport_priv(lp);
rport = starget_to_rport(scsi_target(sc->device));
- FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
- "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n",
- rport->port_id, sc->device->lun, sc->request->tag);
+ tag = sc->request->tag;
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %x flags %x\n",
+ rport->port_id, sc->device->lun, tag, CMD_FLAGS(sc));
+
+ CMD_FLAGS(sc) = FNIC_NO_FLAGS;
if (lp->state != LPORT_ST_READY || !(lp->link_up)) {
ret = FAILED;
@@ -1318,6 +1651,10 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
ret = FAILED;
goto fnic_abort_cmd_end;
}
+ if (task_req == FCPIO_ITMF_ABT_TASK)
+ CMD_FLAGS(sc) |= FNIC_IO_ABTS_ISSUED;
+ else
+ CMD_FLAGS(sc) |= FNIC_IO_TERM_ISSUED;
/*
* We queued an abort IO, wait for its completion.
@@ -1336,6 +1673,7 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
io_req = (struct fnic_io_req *)CMD_SP(sc);
if (!io_req) {
spin_unlock_irqrestore(io_lock, flags);
+ CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_REQ_NULL;
ret = FAILED;
goto fnic_abort_cmd_end;
}
@@ -1344,6 +1682,7 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
/* fw did not complete abort, timed out */
if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
spin_unlock_irqrestore(io_lock, flags);
+ CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_TIMED_OUT;
ret = FAILED;
goto fnic_abort_cmd_end;
}
@@ -1359,12 +1698,21 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
spin_unlock_irqrestore(io_lock, flags);
+ start_time = io_req->start_time;
fnic_release_ioreq_buf(fnic, io_req, sc);
mempool_free(io_req, fnic->io_req_pool);
fnic_abort_cmd_end:
+ FNIC_TRACE(fnic_abort_cmd, sc->device->host->host_no,
+ sc->request->tag, sc,
+ jiffies_to_msecs(jiffies - start_time),
+ 0, ((u64)sc->cmnd[0] << 32 |
+ (u64)sc->cmnd[2] << 24 | (u64)sc->cmnd[3] << 16 |
+ (u64)sc->cmnd[4] << 8 | sc->cmnd[5]),
+ (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
+
FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
- "Returning from abort cmd %s\n",
+ "Returning from abort cmd type %x %s\n", task_req,
(ret == SUCCESS) ?
"SUCCESS" : "FAILED");
return ret;
@@ -1375,16 +1723,28 @@ static inline int fnic_queue_dr_io_req(struct fnic *fnic,
struct fnic_io_req *io_req)
{
struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ struct Scsi_Host *host = fnic->lport->host;
struct scsi_lun fc_lun;
int ret = 0;
unsigned long intr_flags;
+ spin_lock_irqsave(host->host_lock, intr_flags);
+ if (unlikely(fnic_chk_state_flags_locked(fnic,
+ FNIC_FLAGS_IO_BLOCKED))) {
+ spin_unlock_irqrestore(host->host_lock, intr_flags);
+ return FAILED;
+ } else
+ atomic_inc(&fnic->in_flight);
+ spin_unlock_irqrestore(host->host_lock, intr_flags);
+
spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags);
if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
free_wq_copy_descs(fnic, wq);
if (!vnic_wq_copy_desc_avail(wq)) {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "queue_dr_io_req failure - no descriptors\n");
ret = -EAGAIN;
goto lr_io_req_end;
}
@@ -1399,6 +1759,7 @@ static inline int fnic_queue_dr_io_req(struct fnic *fnic,
lr_io_req_end:
spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+ atomic_dec(&fnic->in_flight);
return ret;
}
@@ -1412,7 +1773,7 @@ lr_io_req_end:
static int fnic_clean_pending_aborts(struct fnic *fnic,
struct scsi_cmnd *lr_sc)
{
- int tag;
+ int tag, abt_tag;
struct fnic_io_req *io_req;
spinlock_t *io_lock;
unsigned long flags;
@@ -1421,6 +1782,7 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
struct scsi_lun fc_lun;
struct scsi_device *lun_dev = lr_sc->device;
DECLARE_COMPLETION_ONSTACK(tm_done);
+ enum fnic_ioreq_state old_ioreq_state;
for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
sc = scsi_host_find_tag(fnic->lport->host, tag);
@@ -1449,7 +1811,41 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
"Found IO in %s on lun\n",
fnic_ioreq_state_to_str(CMD_STATE(sc)));
- BUG_ON(CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING);
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+ if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) &&
+ (!(CMD_FLAGS(sc) & FNIC_DEV_RST_ISSUED))) {
+ FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+ "%s dev rst not pending sc 0x%p\n", __func__,
+ sc);
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+ old_ioreq_state = CMD_STATE(sc);
+ /*
+ * Any pending IO issued prior to reset is expected to be
+ * in abts pending state, if not we need to set
+ * FNIC_IOREQ_ABTS_PENDING to indicate the IO is abort pending.
+ * When IO is completed, the IO will be handed over and
+ * handled in this function.
+ */
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+
+ if (io_req->abts_done)
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "%s: io_req->abts_done is set state is %s\n",
+ __func__, fnic_ioreq_state_to_str(CMD_STATE(sc)));
+
+ BUG_ON(io_req->abts_done);
+
+ abt_tag = tag;
+ if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) {
+ abt_tag |= FNIC_TAG_DEV_RST;
+ FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+ "%s: dev rst sc 0x%p\n", __func__, sc);
+ }
CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
io_req->abts_done = &tm_done;
@@ -1458,17 +1854,25 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
/* Now queue the abort command to firmware */
int_to_scsilun(sc->device->lun, &fc_lun);
- if (fnic_queue_abort_io_req(fnic, tag,
+ if (fnic_queue_abort_io_req(fnic, abt_tag,
FCPIO_ITMF_ABT_TASK_TERM,
fc_lun.scsi_lun, io_req)) {
spin_lock_irqsave(io_lock, flags);
io_req = (struct fnic_io_req *)CMD_SP(sc);
if (io_req)
io_req->abts_done = NULL;
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
+ CMD_STATE(sc) = old_ioreq_state;
spin_unlock_irqrestore(io_lock, flags);
ret = 1;
goto clean_pending_aborts_end;
+ } else {
+ spin_lock_irqsave(io_lock, flags);
+ if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET)
+ CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED;
+ spin_unlock_irqrestore(io_lock, flags);
}
+ CMD_FLAGS(sc) |= FNIC_IO_INTERNAL_TERM_ISSUED;
wait_for_completion_timeout(&tm_done,
msecs_to_jiffies
@@ -1479,8 +1883,8 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
io_req = (struct fnic_io_req *)CMD_SP(sc);
if (!io_req) {
spin_unlock_irqrestore(io_lock, flags);
- ret = 1;
- goto clean_pending_aborts_end;
+ CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_REQ_NULL;
+ continue;
}
io_req->abts_done = NULL;
@@ -1488,6 +1892,7 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
/* if abort is still pending with fw, fail */
if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
spin_unlock_irqrestore(io_lock, flags);
+ CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_DONE;
ret = 1;
goto clean_pending_aborts_end;
}
@@ -1498,10 +1903,75 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
mempool_free(io_req, fnic->io_req_pool);
}
+ schedule_timeout(msecs_to_jiffies(2 * fnic->config.ed_tov));
+
+ /* walk again to check, if IOs are still pending in fw */
+ if (fnic_is_abts_pending(fnic, lr_sc))
+ ret = FAILED;
+
clean_pending_aborts_end:
return ret;
}
+/**
+ * fnic_scsi_host_start_tag
+ * Allocates tagid from host's tag list
+ **/
+static inline int
+fnic_scsi_host_start_tag(struct fnic *fnic, struct scsi_cmnd *sc)
+{
+ struct blk_queue_tag *bqt = fnic->lport->host->bqt;
+ int tag, ret = SCSI_NO_TAG;
+
+ BUG_ON(!bqt);
+ if (!bqt) {
+ pr_err("Tags are not supported\n");
+ goto end;
+ }
+
+ do {
+ tag = find_next_zero_bit(bqt->tag_map, bqt->max_depth, 1);
+ if (tag >= bqt->max_depth) {
+ pr_err("Tag allocation failure\n");
+ goto end;
+ }
+ } while (test_and_set_bit(tag, bqt->tag_map));
+
+ bqt->tag_index[tag] = sc->request;
+ sc->request->tag = tag;
+ sc->tag = tag;
+ if (!sc->request->special)
+ sc->request->special = sc;
+
+ ret = tag;
+
+end:
+ return ret;
+}
+
+/**
+ * fnic_scsi_host_end_tag
+ * frees tag allocated by fnic_scsi_host_start_tag.
+ **/
+static inline void
+fnic_scsi_host_end_tag(struct fnic *fnic, struct scsi_cmnd *sc)
+{
+ struct blk_queue_tag *bqt = fnic->lport->host->bqt;
+ int tag = sc->request->tag;
+
+ if (tag == SCSI_NO_TAG)
+ return;
+
+ BUG_ON(!bqt || !bqt->tag_index[tag]);
+ if (!bqt)
+ return;
+
+ bqt->tag_index[tag] = NULL;
+ clear_bit(tag, bqt->tag_map);
+
+ return;
+}
+
/*
* SCSI Eh thread issues a Lun Reset when one or more commands on a LUN
* fail to get aborted. It calls driver's eh_device_reset with a SCSI command
@@ -1511,13 +1981,17 @@ int fnic_device_reset(struct scsi_cmnd *sc)
{
struct fc_lport *lp;
struct fnic *fnic;
- struct fnic_io_req *io_req;
+ struct fnic_io_req *io_req = NULL;
struct fc_rport *rport;
int status;
int ret = FAILED;
spinlock_t *io_lock;
unsigned long flags;
+ unsigned long start_time = 0;
+ struct scsi_lun fc_lun;
+ int tag = 0;
DECLARE_COMPLETION_ONSTACK(tm_done);
+ int tag_gen_flag = 0; /*to track tags allocated by fnic driver*/
/* Wait for rport to unblock */
fc_block_scsi_eh(sc);
@@ -1529,8 +2003,8 @@ int fnic_device_reset(struct scsi_cmnd *sc)
rport = starget_to_rport(scsi_target(sc->device));
FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
- "Device reset called FCID 0x%x, LUN 0x%x\n",
- rport->port_id, sc->device->lun);
+ "Device reset called FCID 0x%x, LUN 0x%x sc 0x%p\n",
+ rport->port_id, sc->device->lun, sc);
if (lp->state != LPORT_ST_READY || !(lp->link_up))
goto fnic_device_reset_end;
@@ -1539,6 +2013,16 @@ int fnic_device_reset(struct scsi_cmnd *sc)
if (fc_remote_port_chkready(rport))
goto fnic_device_reset_end;
+ CMD_FLAGS(sc) = FNIC_DEVICE_RESET;
+ /* Allocate tag if not present */
+
+ tag = sc->request->tag;
+ if (unlikely(tag < 0)) {
+ tag = fnic_scsi_host_start_tag(fnic, sc);
+ if (unlikely(tag == SCSI_NO_TAG))
+ goto fnic_device_reset_end;
+ tag_gen_flag = 1;
+ }
io_lock = fnic_io_lock_hash(fnic, sc);
spin_lock_irqsave(io_lock, flags);
io_req = (struct fnic_io_req *)CMD_SP(sc);
@@ -1562,8 +2046,7 @@ int fnic_device_reset(struct scsi_cmnd *sc)
CMD_LR_STATUS(sc) = FCPIO_INVALID_CODE;
spin_unlock_irqrestore(io_lock, flags);
- FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "TAG %d\n",
- sc->request->tag);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "TAG %x\n", tag);
/*
* issue the device reset, if enqueue failed, clean up the ioreq
@@ -1576,6 +2059,9 @@ int fnic_device_reset(struct scsi_cmnd *sc)
io_req->dr_done = NULL;
goto fnic_device_reset_clean;
}
+ spin_lock_irqsave(io_lock, flags);
+ CMD_FLAGS(sc) |= FNIC_DEV_RST_ISSUED;
+ spin_unlock_irqrestore(io_lock, flags);
/*
* Wait on the local completion for LUN reset. The io_req may be
@@ -1588,12 +2074,13 @@ int fnic_device_reset(struct scsi_cmnd *sc)
io_req = (struct fnic_io_req *)CMD_SP(sc);
if (!io_req) {
spin_unlock_irqrestore(io_lock, flags);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "io_req is null tag 0x%x sc 0x%p\n", tag, sc);
goto fnic_device_reset_end;
}
io_req->dr_done = NULL;
status = CMD_LR_STATUS(sc);
- spin_unlock_irqrestore(io_lock, flags);
/*
* If lun reset not completed, bail out with failed. io_req
@@ -1602,7 +2089,53 @@ int fnic_device_reset(struct scsi_cmnd *sc)
if (status == FCPIO_INVALID_CODE) {
FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
"Device reset timed out\n");
- goto fnic_device_reset_end;
+ CMD_FLAGS(sc) |= FNIC_DEV_RST_TIMED_OUT;
+ spin_unlock_irqrestore(io_lock, flags);
+ int_to_scsilun(sc->device->lun, &fc_lun);
+ /*
+ * Issue abort and terminate on the device reset request.
+ * If q'ing of the abort fails, retry issue it after a delay.
+ */
+ while (1) {
+ spin_lock_irqsave(io_lock, flags);
+ if (CMD_FLAGS(sc) & FNIC_DEV_RST_TERM_ISSUED) {
+ spin_unlock_irqrestore(io_lock, flags);
+ break;
+ }
+ spin_unlock_irqrestore(io_lock, flags);
+ if (fnic_queue_abort_io_req(fnic,
+ tag | FNIC_TAG_DEV_RST,
+ FCPIO_ITMF_ABT_TASK_TERM,
+ fc_lun.scsi_lun, io_req)) {
+ wait_for_completion_timeout(&tm_done,
+ msecs_to_jiffies(FNIC_ABT_TERM_DELAY_TIMEOUT));
+ } else {
+ spin_lock_irqsave(io_lock, flags);
+ CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED;
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+ io_req->abts_done = &tm_done;
+ spin_unlock_irqrestore(io_lock, flags);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Abort and terminate issued on Device reset "
+ "tag 0x%x sc 0x%p\n", tag, sc);
+ break;
+ }
+ }
+ while (1) {
+ spin_lock_irqsave(io_lock, flags);
+ if (!(CMD_FLAGS(sc) & FNIC_DEV_RST_DONE)) {
+ spin_unlock_irqrestore(io_lock, flags);
+ wait_for_completion_timeout(&tm_done,
+ msecs_to_jiffies(FNIC_LUN_RESET_TIMEOUT));
+ break;
+ } else {
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ io_req->abts_done = NULL;
+ goto fnic_device_reset_clean;
+ }
+ }
+ } else {
+ spin_unlock_irqrestore(io_lock, flags);
}
/* Completed, but not successful, clean up the io_req, return fail */
@@ -1645,11 +2178,24 @@ fnic_device_reset_clean:
spin_unlock_irqrestore(io_lock, flags);
if (io_req) {
+ start_time = io_req->start_time;
fnic_release_ioreq_buf(fnic, io_req, sc);
mempool_free(io_req, fnic->io_req_pool);
}
fnic_device_reset_end:
+ FNIC_TRACE(fnic_device_reset, sc->device->host->host_no,
+ sc->request->tag, sc,
+ jiffies_to_msecs(jiffies - start_time),
+ 0, ((u64)sc->cmnd[0] << 32 |
+ (u64)sc->cmnd[2] << 24 | (u64)sc->cmnd[3] << 16 |
+ (u64)sc->cmnd[4] << 8 | sc->cmnd[5]),
+ (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
+
+ /* free tag if it is allocated */
+ if (unlikely(tag_gen_flag))
+ fnic_scsi_host_end_tag(fnic, sc);
+
FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
"Returning from device reset %s\n",
(ret == SUCCESS) ?
@@ -1735,7 +2281,15 @@ void fnic_scsi_abort_io(struct fc_lport *lp)
DECLARE_COMPLETION_ONSTACK(remove_wait);
/* Issue firmware reset for fnic, wait for reset to complete */
+retry_fw_reset:
spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (unlikely(fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)) {
+ /* fw reset is in progress, poll for its completion */
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ schedule_timeout(msecs_to_jiffies(100));
+ goto retry_fw_reset;
+ }
+
fnic->remove_wait = &remove_wait;
old_state = fnic->state;
fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
@@ -1776,7 +2330,14 @@ void fnic_scsi_cleanup(struct fc_lport *lp)
struct fnic *fnic = lport_priv(lp);
/* issue fw reset */
+retry_fw_reset:
spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (unlikely(fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)) {
+ /* fw reset is in progress, poll for its completion */
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ schedule_timeout(msecs_to_jiffies(100));
+ goto retry_fw_reset;
+ }
old_state = fnic->state;
fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
fnic_update_mac_locked(fnic, fnic->ctlr.ctl_src_addr);
@@ -1822,3 +2383,61 @@ call_fc_exch_mgr_reset:
fc_exch_mgr_reset(lp, sid, did);
}
+
+/*
+ * fnic_is_abts_pending() is a helper function that
+ * walks through tag map to check if there is any IOs pending,if there is one,
+ * then it returns 1 (true), otherwise 0 (false)
+ * if @lr_sc is non NULL, then it checks IOs specific to particular LUN,
+ * otherwise, it checks for all IOs.
+ */
+int fnic_is_abts_pending(struct fnic *fnic, struct scsi_cmnd *lr_sc)
+{
+ int tag;
+ struct fnic_io_req *io_req;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ int ret = 0;
+ struct scsi_cmnd *sc;
+ struct scsi_device *lun_dev = NULL;
+
+ if (lr_sc)
+ lun_dev = lr_sc->device;
+
+ /* walk again to check, if IOs are still pending in fw */
+ for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+ sc = scsi_host_find_tag(fnic->lport->host, tag);
+ /*
+ * ignore this lun reset cmd or cmds that do not belong to
+ * this lun
+ */
+ if (!sc || (lr_sc && (sc->device != lun_dev || sc == lr_sc)))
+ continue;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ if (!io_req || sc->device != lun_dev) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+
+ /*
+ * Found IO that is still pending with firmware and
+ * belongs to the LUN that we are resetting
+ */
+ FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+ "Found IO in %s on lun\n",
+ fnic_ioreq_state_to_str(CMD_STATE(sc)));
+
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = 1;
+ continue;
+ }
+ }
+
+ return ret;
+}
diff --git a/drivers/scsi/fnic/fnic_trace.c b/drivers/scsi/fnic/fnic_trace.c
new file mode 100644
index 0000000..23a60e3
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_trace.c
@@ -0,0 +1,273 @@
+/*
+ * Copyright 2012 Cisco Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/mempool.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/kallsyms.h>
+#include "fnic_io.h"
+#include "fnic.h"
+
+unsigned int trace_max_pages;
+static int fnic_max_trace_entries;
+
+static unsigned long fnic_trace_buf_p;
+static DEFINE_SPINLOCK(fnic_trace_lock);
+
+static fnic_trace_dbg_t fnic_trace_entries;
+int fnic_tracing_enabled = 1;
+
+/*
+ * fnic_trace_get_buf - Give buffer pointer to user to fill up trace information
+ *
+ * Description:
+ * This routine gets next available trace buffer entry location @wr_idx
+ * from allocated trace buffer pages and give that memory location
+ * to user to store the trace information.
+ *
+ * Return Value:
+ * This routine returns pointer to next available trace entry
+ * @fnic_buf_head for user to fill trace information.
+ */
+fnic_trace_data_t *fnic_trace_get_buf(void)
+{
+ unsigned long fnic_buf_head;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic_trace_lock, flags);
+
+ /*
+ * Get next available memory location for writing trace information
+ * at @wr_idx and increment @wr_idx
+ */
+ fnic_buf_head =
+ fnic_trace_entries.page_offset[fnic_trace_entries.wr_idx];
+ fnic_trace_entries.wr_idx++;
+
+ /*
+ * Verify if trace buffer is full then change wd_idx to
+ * start from zero
+ */
+ if (fnic_trace_entries.wr_idx >= fnic_max_trace_entries)
+ fnic_trace_entries.wr_idx = 0;
+
+ /*
+ * Verify if write index @wr_idx and read index @rd_idx are same then
+ * increment @rd_idx to move to next entry in trace buffer
+ */
+ if (fnic_trace_entries.wr_idx == fnic_trace_entries.rd_idx) {
+ fnic_trace_entries.rd_idx++;
+ if (fnic_trace_entries.rd_idx >= fnic_max_trace_entries)
+ fnic_trace_entries.rd_idx = 0;
+ }
+ spin_unlock_irqrestore(&fnic_trace_lock, flags);
+ return (fnic_trace_data_t *)fnic_buf_head;
+}
+
+/*
+ * fnic_get_trace_data - Copy trace buffer to a memory file
+ * @fnic_dbgfs_t: pointer to debugfs trace buffer
+ *
+ * Description:
+ * This routine gathers the fnic trace debugfs data from the fnic_trace_data_t
+ * buffer and dumps it to fnic_dbgfs_t. It will start at the rd_idx entry in
+ * the log and process the log until the end of the buffer. Then it will gather
+ * from the beginning of the log and process until the current entry @wr_idx.
+ *
+ * Return Value:
+ * This routine returns the amount of bytes that were dumped into fnic_dbgfs_t
+ */
+int fnic_get_trace_data(fnic_dbgfs_t *fnic_dbgfs_prt)
+{
+ int rd_idx;
+ int wr_idx;
+ int len = 0;
+ unsigned long flags;
+ char str[KSYM_SYMBOL_LEN];
+ struct timespec val;
+ fnic_trace_data_t *tbp;
+
+ spin_lock_irqsave(&fnic_trace_lock, flags);
+ rd_idx = fnic_trace_entries.rd_idx;
+ wr_idx = fnic_trace_entries.wr_idx;
+ if (wr_idx < rd_idx) {
+ while (1) {
+ /* Start from read index @rd_idx */
+ tbp = (fnic_trace_data_t *)
+ fnic_trace_entries.page_offset[rd_idx];
+ if (!tbp) {
+ spin_unlock_irqrestore(&fnic_trace_lock, flags);
+ return 0;
+ }
+ /* Convert function pointer to function name */
+ if (sizeof(unsigned long) < 8) {
+ sprint_symbol(str, tbp->fnaddr.low);
+ jiffies_to_timespec(tbp->timestamp.low, &val);
+ } else {
+ sprint_symbol(str, tbp->fnaddr.val);
+ jiffies_to_timespec(tbp->timestamp.val, &val);
+ }
+ /*
+ * Dump trace buffer entry to memory file
+ * and increment read index @rd_idx
+ */
+ len += snprintf(fnic_dbgfs_prt->buffer + len,
+ (trace_max_pages * PAGE_SIZE * 3) - len,
+ "%16lu.%16lu %-50s %8x %8x %16llx %16llx "
+ "%16llx %16llx %16llx\n", val.tv_sec,
+ val.tv_nsec, str, tbp->host_no, tbp->tag,
+ tbp->data[0], tbp->data[1], tbp->data[2],
+ tbp->data[3], tbp->data[4]);
+ rd_idx++;
+ /*
+ * If rd_idx is reached to maximum trace entries
+ * then move rd_idx to zero
+ */
+ if (rd_idx > (fnic_max_trace_entries-1))
+ rd_idx = 0;
+ /*
+ * Continure dumpping trace buffer entries into
+ * memory file till rd_idx reaches write index
+ */
+ if (rd_idx == wr_idx)
+ break;
+ }
+ } else if (wr_idx > rd_idx) {
+ while (1) {
+ /* Start from read index @rd_idx */
+ tbp = (fnic_trace_data_t *)
+ fnic_trace_entries.page_offset[rd_idx];
+ if (!tbp) {
+ spin_unlock_irqrestore(&fnic_trace_lock, flags);
+ return 0;
+ }
+ /* Convert function pointer to function name */
+ if (sizeof(unsigned long) < 8) {
+ sprint_symbol(str, tbp->fnaddr.low);
+ jiffies_to_timespec(tbp->timestamp.low, &val);
+ } else {
+ sprint_symbol(str, tbp->fnaddr.val);
+ jiffies_to_timespec(tbp->timestamp.val, &val);
+ }
+ /*
+ * Dump trace buffer entry to memory file
+ * and increment read index @rd_idx
+ */
+ len += snprintf(fnic_dbgfs_prt->buffer + len,
+ (trace_max_pages * PAGE_SIZE * 3) - len,
+ "%16lu.%16lu %-50s %8x %8x %16llx %16llx "
+ "%16llx %16llx %16llx\n", val.tv_sec,
+ val.tv_nsec, str, tbp->host_no, tbp->tag,
+ tbp->data[0], tbp->data[1], tbp->data[2],
+ tbp->data[3], tbp->data[4]);
+ rd_idx++;
+ /*
+ * Continue dumpping trace buffer entries into
+ * memory file till rd_idx reaches write index
+ */
+ if (rd_idx == wr_idx)
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&fnic_trace_lock, flags);
+ return len;
+}
+
+/*
+ * fnic_trace_buf_init - Initialize fnic trace buffer logging facility
+ *
+ * Description:
+ * Initialize trace buffer data structure by allocating required memory and
+ * setting page_offset information for every trace entry by adding trace entry
+ * length to previous page_offset value.
+ */
+int fnic_trace_buf_init(void)
+{
+ unsigned long fnic_buf_head;
+ int i;
+ int err = 0;
+
+ trace_max_pages = fnic_trace_max_pages;
+ fnic_max_trace_entries = (trace_max_pages * PAGE_SIZE)/
+ FNIC_ENTRY_SIZE_BYTES;
+
+ fnic_trace_buf_p = (unsigned long)vmalloc((trace_max_pages * PAGE_SIZE));
+ if (!fnic_trace_buf_p) {
+ printk(KERN_ERR PFX "Failed to allocate memory "
+ "for fnic_trace_buf_p\n");
+ err = -ENOMEM;
+ goto err_fnic_trace_buf_init;
+ }
+ memset((void *)fnic_trace_buf_p, 0, (trace_max_pages * PAGE_SIZE));
+
+ fnic_trace_entries.page_offset = vmalloc(fnic_max_trace_entries *
+ sizeof(unsigned long));
+ if (!fnic_trace_entries.page_offset) {
+ printk(KERN_ERR PFX "Failed to allocate memory for"
+ " page_offset\n");
+ if (fnic_trace_buf_p) {
+ vfree((void *)fnic_trace_buf_p);
+ fnic_trace_buf_p = 0;
+ }
+ err = -ENOMEM;
+ goto err_fnic_trace_buf_init;
+ }
+ memset((void *)fnic_trace_entries.page_offset, 0,
+ (fnic_max_trace_entries * sizeof(unsigned long)));
+ fnic_trace_entries.wr_idx = fnic_trace_entries.rd_idx = 0;
+ fnic_buf_head = fnic_trace_buf_p;
+
+ /*
+ * Set page_offset field of fnic_trace_entries struct by
+ * calculating memory location for every trace entry using
+ * length of each trace entry
+ */
+ for (i = 0; i < fnic_max_trace_entries; i++) {
+ fnic_trace_entries.page_offset[i] = fnic_buf_head;
+ fnic_buf_head += FNIC_ENTRY_SIZE_BYTES;
+ }
+ err = fnic_trace_debugfs_init();
+ if (err < 0) {
+ printk(KERN_ERR PFX "Failed to initialize debugfs for tracing\n");
+ goto err_fnic_trace_debugfs_init;
+ }
+ printk(KERN_INFO PFX "Successfully Initialized Trace Buffer\n");
+ return err;
+err_fnic_trace_debugfs_init:
+ fnic_trace_free();
+err_fnic_trace_buf_init:
+ return err;
+}
+
+/*
+ * fnic_trace_free - Free memory of fnic trace data structures.
+ */
+void fnic_trace_free(void)
+{
+ fnic_tracing_enabled = 0;
+ fnic_trace_debugfs_terminate();
+ if (fnic_trace_entries.page_offset) {
+ vfree((void *)fnic_trace_entries.page_offset);
+ fnic_trace_entries.page_offset = NULL;
+ }
+ if (fnic_trace_buf_p) {
+ vfree((void *)fnic_trace_buf_p);
+ fnic_trace_buf_p = 0;
+ }
+ printk(KERN_INFO PFX "Successfully Freed Trace Buffer\n");
+}
diff --git a/drivers/scsi/fnic/fnic_trace.h b/drivers/scsi/fnic/fnic_trace.h
new file mode 100644
index 0000000..cef42b4
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_trace.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2012 Cisco Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __FNIC_TRACE_H__
+#define __FNIC_TRACE_H__
+
+#define FNIC_ENTRY_SIZE_BYTES 64
+
+extern ssize_t simple_read_from_buffer(void __user *to,
+ size_t count,
+ loff_t *ppos,
+ const void *from,
+ size_t available);
+
+extern unsigned int fnic_trace_max_pages;
+extern int fnic_tracing_enabled;
+extern unsigned int trace_max_pages;
+
+typedef struct fnic_trace_dbg {
+ int wr_idx;
+ int rd_idx;
+ unsigned long *page_offset;
+} fnic_trace_dbg_t;
+
+typedef struct fnic_dbgfs {
+ int buffer_len;
+ char *buffer;
+} fnic_dbgfs_t;
+
+struct fnic_trace_data {
+ union {
+ struct {
+ u32 low;
+ u32 high;
+ };
+ u64 val;
+ } timestamp, fnaddr;
+ u32 host_no;
+ u32 tag;
+ u64 data[5];
+} __attribute__((__packed__));
+
+typedef struct fnic_trace_data fnic_trace_data_t;
+
+#define FNIC_TRACE_ENTRY_SIZE \
+ (FNIC_ENTRY_SIZE_BYTES - sizeof(fnic_trace_data_t))
+
+#define FNIC_TRACE(_fn, _hn, _t, _a, _b, _c, _d, _e) \
+ if (unlikely(fnic_tracing_enabled)) { \
+ fnic_trace_data_t *trace_buf = fnic_trace_get_buf(); \
+ if (trace_buf) { \
+ if (sizeof(unsigned long) < 8) { \
+ trace_buf->timestamp.low = jiffies; \
+ trace_buf->fnaddr.low = (u32)(unsigned long)_fn; \
+ } else { \
+ trace_buf->timestamp.val = jiffies; \
+ trace_buf->fnaddr.val = (u64)(unsigned long)_fn; \
+ } \
+ trace_buf->host_no = _hn; \
+ trace_buf->tag = _t; \
+ trace_buf->data[0] = (u64)(unsigned long)_a; \
+ trace_buf->data[1] = (u64)(unsigned long)_b; \
+ trace_buf->data[2] = (u64)(unsigned long)_c; \
+ trace_buf->data[3] = (u64)(unsigned long)_d; \
+ trace_buf->data[4] = (u64)(unsigned long)_e; \
+ } \
+ }
+
+fnic_trace_data_t *fnic_trace_get_buf(void);
+int fnic_get_trace_data(fnic_dbgfs_t *);
+int fnic_trace_buf_init(void);
+void fnic_trace_free(void);
+int fnic_trace_debugfs_init(void);
+void fnic_trace_debugfs_terminate(void);
+
+#endif
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 4f33806..7f4f790 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -165,7 +165,7 @@ static void cmd_free(struct ctlr_info *h, struct CommandList *c);
static void cmd_special_free(struct ctlr_info *h, struct CommandList *c);
static struct CommandList *cmd_alloc(struct ctlr_info *h);
static struct CommandList *cmd_special_alloc(struct ctlr_info *h);
-static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
+static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
void *buff, size_t size, u8 page_code, unsigned char *scsi3addr,
int cmd_type);
@@ -1131,7 +1131,7 @@ clean:
return -ENOMEM;
}
-static void hpsa_map_sg_chain_block(struct ctlr_info *h,
+static int hpsa_map_sg_chain_block(struct ctlr_info *h,
struct CommandList *c)
{
struct SGDescriptor *chain_sg, *chain_block;
@@ -1144,8 +1144,15 @@ static void hpsa_map_sg_chain_block(struct ctlr_info *h,
(c->Header.SGTotal - h->max_cmd_sg_entries);
temp64 = pci_map_single(h->pdev, chain_block, chain_sg->Len,
PCI_DMA_TODEVICE);
+ if (dma_mapping_error(&h->pdev->dev, temp64)) {
+ /* prevent subsequent unmapping */
+ chain_sg->Addr.lower = 0;
+ chain_sg->Addr.upper = 0;
+ return -1;
+ }
chain_sg->Addr.lower = (u32) (temp64 & 0x0FFFFFFFFULL);
chain_sg->Addr.upper = (u32) ((temp64 >> 32) & 0x0FFFFFFFFULL);
+ return 0;
}
static void hpsa_unmap_sg_chain_block(struct ctlr_info *h,
@@ -1390,7 +1397,7 @@ static void hpsa_pci_unmap(struct pci_dev *pdev,
}
}
-static void hpsa_map_one(struct pci_dev *pdev,
+static int hpsa_map_one(struct pci_dev *pdev,
struct CommandList *cp,
unsigned char *buf,
size_t buflen,
@@ -1401,10 +1408,16 @@ static void hpsa_map_one(struct pci_dev *pdev,
if (buflen == 0 || data_direction == PCI_DMA_NONE) {
cp->Header.SGList = 0;
cp->Header.SGTotal = 0;
- return;
+ return 0;
}
addr64 = (u64) pci_map_single(pdev, buf, buflen, data_direction);
+ if (dma_mapping_error(&pdev->dev, addr64)) {
+ /* Prevent subsequent unmap of something never mapped */
+ cp->Header.SGList = 0;
+ cp->Header.SGTotal = 0;
+ return -1;
+ }
cp->SG[0].Addr.lower =
(u32) (addr64 & (u64) 0x00000000FFFFFFFF);
cp->SG[0].Addr.upper =
@@ -1412,6 +1425,7 @@ static void hpsa_map_one(struct pci_dev *pdev,
cp->SG[0].Len = buflen;
cp->Header.SGList = (u8) 1; /* no. SGs contig in this cmd */
cp->Header.SGTotal = (u16) 1; /* total sgs in this cmd list */
+ return 0;
}
static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h,
@@ -1540,13 +1554,18 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
return -ENOMEM;
}
- fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, page, scsi3addr, TYPE_CMD);
+ if (fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize,
+ page, scsi3addr, TYPE_CMD)) {
+ rc = -1;
+ goto out;
+ }
hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
ei = c->err_info;
if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
hpsa_scsi_interpret_error(c);
rc = -1;
}
+out:
cmd_special_free(h, c);
return rc;
}
@@ -1564,7 +1583,9 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr)
return -ENOMEM;
}
- fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, scsi3addr, TYPE_MSG);
+ /* fill_cmd can't fail here, no data buffer to map. */
+ (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h,
+ NULL, 0, 0, scsi3addr, TYPE_MSG);
hpsa_scsi_do_simple_cmd_core(h, c);
/* no unmap needed here because no data xfer. */
@@ -1631,8 +1652,11 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
}
/* address the controller */
memset(scsi3addr, 0, sizeof(scsi3addr));
- fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h,
- buf, bufsize, 0, scsi3addr, TYPE_CMD);
+ if (fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h,
+ buf, bufsize, 0, scsi3addr, TYPE_CMD)) {
+ rc = -1;
+ goto out;
+ }
if (extended_response)
c->Request.CDB[1] = extended_response;
hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
@@ -1642,6 +1666,7 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
hpsa_scsi_interpret_error(c);
rc = -1;
}
+out:
cmd_special_free(h, c);
return rc;
}
@@ -2105,7 +2130,10 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
if (chained) {
cp->Header.SGList = h->max_cmd_sg_entries;
cp->Header.SGTotal = (u16) (use_sg + 1);
- hpsa_map_sg_chain_block(h, cp);
+ if (hpsa_map_sg_chain_block(h, cp)) {
+ scsi_dma_unmap(cmd);
+ return -1;
+ }
return 0;
}
@@ -2353,8 +2381,9 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h,
if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS)
waittime = waittime * 2;
- /* Send the Test Unit Ready */
- fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, lunaddr, TYPE_CMD);
+ /* Send the Test Unit Ready, fill_cmd can't fail, no mapping */
+ (void) fill_cmd(c, TEST_UNIT_READY, h,
+ NULL, 0, 0, lunaddr, TYPE_CMD);
hpsa_scsi_do_simple_cmd_core(h, c);
/* no unmap needed here because no data xfer. */
@@ -2439,7 +2468,9 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
return -ENOMEM;
}
- fill_cmd(c, HPSA_ABORT_MSG, h, abort, 0, 0, scsi3addr, TYPE_MSG);
+ /* fill_cmd can't fail here, no buffer to map */
+ (void) fill_cmd(c, HPSA_ABORT_MSG, h, abort,
+ 0, 0, scsi3addr, TYPE_MSG);
if (swizzle)
swizzle_abort_tag(&c->Request.CDB[4]);
hpsa_scsi_do_simple_cmd_core(h, c);
@@ -2928,6 +2959,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
struct CommandList *c;
char *buff = NULL;
union u64bit temp64;
+ int rc = 0;
if (!argp)
return -EINVAL;
@@ -2947,8 +2979,8 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
/* Copy the data into the buffer we created */
if (copy_from_user(buff, iocommand.buf,
iocommand.buf_size)) {
- kfree(buff);
- return -EFAULT;
+ rc = -EFAULT;
+ goto out_kfree;
}
} else {
memset(buff, 0, iocommand.buf_size);
@@ -2956,8 +2988,8 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
}
c = cmd_special_alloc(h);
if (c == NULL) {
- kfree(buff);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto out_kfree;
}
/* Fill in the command type */
c->cmd_type = CMD_IOCTL_PEND;
@@ -2982,6 +3014,13 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
if (iocommand.buf_size > 0) {
temp64.val = pci_map_single(h->pdev, buff,
iocommand.buf_size, PCI_DMA_BIDIRECTIONAL);
+ if (dma_mapping_error(&h->pdev->dev, temp64.val)) {
+ c->SG[0].Addr.lower = 0;
+ c->SG[0].Addr.upper = 0;
+ c->SG[0].Len = 0;
+ rc = -ENOMEM;
+ goto out;
+ }
c->SG[0].Addr.lower = temp64.val32.lower;
c->SG[0].Addr.upper = temp64.val32.upper;
c->SG[0].Len = iocommand.buf_size;
@@ -2996,22 +3035,22 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
memcpy(&iocommand.error_info, c->err_info,
sizeof(iocommand.error_info));
if (copy_to_user(argp, &iocommand, sizeof(iocommand))) {
- kfree(buff);
- cmd_special_free(h, c);
- return -EFAULT;
+ rc = -EFAULT;
+ goto out;
}
if (iocommand.Request.Type.Direction == XFER_READ &&
iocommand.buf_size > 0) {
/* Copy the data out of the buffer we created */
if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) {
- kfree(buff);
- cmd_special_free(h, c);
- return -EFAULT;
+ rc = -EFAULT;
+ goto out;
}
}
- kfree(buff);
+out:
cmd_special_free(h, c);
- return 0;
+out_kfree:
+ kfree(buff);
+ return rc;
}
static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
@@ -3103,6 +3142,15 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
for (i = 0; i < sg_used; i++) {
temp64.val = pci_map_single(h->pdev, buff[i],
buff_size[i], PCI_DMA_BIDIRECTIONAL);
+ if (dma_mapping_error(&h->pdev->dev, temp64.val)) {
+ c->SG[i].Addr.lower = 0;
+ c->SG[i].Addr.upper = 0;
+ c->SG[i].Len = 0;
+ hpsa_pci_unmap(h->pdev, c, i,
+ PCI_DMA_BIDIRECTIONAL);
+ status = -ENOMEM;
+ goto cleanup1;
+ }
c->SG[i].Addr.lower = temp64.val32.lower;
c->SG[i].Addr.upper = temp64.val32.upper;
c->SG[i].Len = buff_size[i];
@@ -3190,7 +3238,8 @@ static int hpsa_send_host_reset(struct ctlr_info *h, unsigned char *scsi3addr,
c = cmd_alloc(h);
if (!c)
return -ENOMEM;
- fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
+ /* fill_cmd can't fail here, no data buffer to map */
+ (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
RAID_CTLR_LUNID, TYPE_MSG);
c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */
c->waiting = NULL;
@@ -3202,7 +3251,7 @@ static int hpsa_send_host_reset(struct ctlr_info *h, unsigned char *scsi3addr,
return 0;
}
-static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
+static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
void *buff, size_t size, u8 page_code, unsigned char *scsi3addr,
int cmd_type)
{
@@ -3271,7 +3320,7 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
default:
dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
BUG();
- return;
+ return -1;
}
} else if (cmd_type == TYPE_MSG) {
switch (cmd) {
@@ -3343,10 +3392,9 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
default:
pci_dir = PCI_DMA_BIDIRECTIONAL;
}
-
- hpsa_map_one(h->pdev, c, buff, size, pci_dir);
-
- return;
+ if (hpsa_map_one(h->pdev, c, buff, size, pci_dir))
+ return -1;
+ return 0;
}
/*
@@ -4882,10 +4930,13 @@ static void hpsa_flush_cache(struct ctlr_info *h)
dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
goto out_of_memory;
}
- fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0,
- RAID_CTLR_LUNID, TYPE_CMD);
+ if (fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0,
+ RAID_CTLR_LUNID, TYPE_CMD)) {
+ goto out;
+ }
hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE);
if (c->err_info->CommandStatus != 0)
+out:
dev_warn(&h->pdev->dev,
"error flushing cache on controller\n");
cmd_special_free(h, c);
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 8fa79b8..f328089 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6112,7 +6112,7 @@ static int ipr_queuecommand(struct Scsi_Host *shost,
* We have told the host to stop giving us new requests, but
* ERP ops don't count. FIXME
*/
- if (unlikely(!hrrq->allow_cmds && !hrrq->ioa_is_dead)) {
+ if (unlikely(!hrrq->allow_cmds && !hrrq->ioa_is_dead && !hrrq->removing_ioa)) {
spin_unlock_irqrestore(hrrq->lock, hrrq_flags);
return SCSI_MLQUEUE_HOST_BUSY;
}
@@ -6121,7 +6121,7 @@ static int ipr_queuecommand(struct Scsi_Host *shost,
* FIXME - Create scsi_set_host_offline interface
* and the ioa_is_dead check can be removed
*/
- if (unlikely(hrrq->ioa_is_dead || !res)) {
+ if (unlikely(hrrq->ioa_is_dead || hrrq->removing_ioa || !res)) {
spin_unlock_irqrestore(hrrq->lock, hrrq_flags);
goto err_nodev;
}
@@ -6741,14 +6741,17 @@ static int ipr_ioa_bringdown_done(struct ipr_cmnd *ipr_cmd)
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
ENTER;
+ if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].removing_ioa) {
+ ipr_trace;
+ spin_unlock_irq(ioa_cfg->host->host_lock);
+ scsi_unblock_requests(ioa_cfg->host);
+ spin_lock_irq(ioa_cfg->host->host_lock);
+ }
+
ioa_cfg->in_reset_reload = 0;
ioa_cfg->reset_retries = 0;
list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
wake_up_all(&ioa_cfg->reset_wait_q);
-
- spin_unlock_irq(ioa_cfg->host->host_lock);
- scsi_unblock_requests(ioa_cfg->host);
- spin_lock_irq(ioa_cfg->host->host_lock);
LEAVE;
return IPR_RC_JOB_RETURN;
@@ -8494,7 +8497,8 @@ static void _ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg,
spin_unlock(&ioa_cfg->hrrq[i]._lock);
}
wmb();
- scsi_block_requests(ioa_cfg->host);
+ if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].removing_ioa)
+ scsi_block_requests(ioa_cfg->host);
ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
ioa_cfg->reset_cmd = ipr_cmd;
@@ -8549,9 +8553,11 @@ static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg,
ipr_fail_all_ops(ioa_cfg);
wake_up_all(&ioa_cfg->reset_wait_q);
- spin_unlock_irq(ioa_cfg->host->host_lock);
- scsi_unblock_requests(ioa_cfg->host);
- spin_lock_irq(ioa_cfg->host->host_lock);
+ if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].removing_ioa) {
+ spin_unlock_irq(ioa_cfg->host->host_lock);
+ scsi_unblock_requests(ioa_cfg->host);
+ spin_lock_irq(ioa_cfg->host->host_lock);
+ }
return;
} else {
ioa_cfg->in_ioa_bringdown = 1;
@@ -9695,6 +9701,7 @@ static void __ipr_remove(struct pci_dev *pdev)
{
unsigned long host_lock_flags = 0;
struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
+ int i;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
@@ -9704,6 +9711,12 @@ static void __ipr_remove(struct pci_dev *pdev)
spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
}
+ for (i = 0; i < ioa_cfg->hrrq_num; i++) {
+ spin_lock(&ioa_cfg->hrrq[i]._lock);
+ ioa_cfg->hrrq[i].removing_ioa = 1;
+ spin_unlock(&ioa_cfg->hrrq[i]._lock);
+ }
+ wmb();
ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 1a9a246..21a6ff1 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -493,6 +493,7 @@ struct ipr_hrr_queue {
u8 allow_interrupts:1;
u8 ioa_is_dead:1;
u8 allow_cmds:1;
+ u8 removing_ioa:1;
struct blk_iopoll iopoll;
};
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index fcb9d0b..09c81b2 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -1381,10 +1381,10 @@ static void fc_fcp_timeout(unsigned long data)
fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
- if (fsp->state & FC_SRB_RCV_STATUS)
- fc_fcp_complete_locked(fsp);
- else if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
+ if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
fc_fcp_rec(fsp);
+ else if (fsp->state & FC_SRB_RCV_STATUS)
+ fc_fcp_complete_locked(fsp);
else
fc_fcp_recovery(fsp, FC_TIMED_OUT);
fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
diff --git a/drivers/scsi/libfc/fc_libfc.h b/drivers/scsi/libfc/fc_libfc.h
index c2830cc..b74189d 100644
--- a/drivers/scsi/libfc/fc_libfc.h
+++ b/drivers/scsi/libfc/fc_libfc.h
@@ -41,25 +41,25 @@ extern unsigned int fc_debug_logging;
#define FC_LIBFC_DBG(fmt, args...) \
FC_CHECK_LOGGING(FC_LIBFC_LOGGING, \
- printk(KERN_INFO "libfc: " fmt, ##args))
+ pr_info("libfc: " fmt, ##args))
#define FC_LPORT_DBG(lport, fmt, args...) \
FC_CHECK_LOGGING(FC_LPORT_LOGGING, \
- printk(KERN_INFO "host%u: lport %6.6x: " fmt, \
- (lport)->host->host_no, \
- (lport)->port_id, ##args))
+ pr_info("host%u: lport %6.6x: " fmt, \
+ (lport)->host->host_no, \
+ (lport)->port_id, ##args))
-#define FC_DISC_DBG(disc, fmt, args...) \
- FC_CHECK_LOGGING(FC_DISC_LOGGING, \
- printk(KERN_INFO "host%u: disc: " fmt, \
- fc_disc_lport(disc)->host->host_no, \
- ##args))
+#define FC_DISC_DBG(disc, fmt, args...) \
+ FC_CHECK_LOGGING(FC_DISC_LOGGING, \
+ pr_info("host%u: disc: " fmt, \
+ fc_disc_lport(disc)->host->host_no, \
+ ##args))
#define FC_RPORT_ID_DBG(lport, port_id, fmt, args...) \
FC_CHECK_LOGGING(FC_RPORT_LOGGING, \
- printk(KERN_INFO "host%u: rport %6.6x: " fmt, \
- (lport)->host->host_no, \
- (port_id), ##args))
+ pr_info("host%u: rport %6.6x: " fmt, \
+ (lport)->host->host_no, \
+ (port_id), ##args))
#define FC_RPORT_DBG(rdata, fmt, args...) \
FC_RPORT_ID_DBG((rdata)->local_port, (rdata)->ids.port_id, fmt, ##args)
@@ -70,13 +70,13 @@ extern unsigned int fc_debug_logging;
if ((pkt)->seq_ptr) { \
struct fc_exch *_ep = NULL; \
_ep = fc_seq_exch((pkt)->seq_ptr); \
- printk(KERN_INFO "host%u: fcp: %6.6x: " \
+ pr_info("host%u: fcp: %6.6x: " \
"xid %04x-%04x: " fmt, \
(pkt)->lp->host->host_no, \
(pkt)->rport->port_id, \
(_ep)->oxid, (_ep)->rxid, ##args); \
} else { \
- printk(KERN_INFO "host%u: fcp: %6.6x: " fmt, \
+ pr_info("host%u: fcp: %6.6x: " fmt, \
(pkt)->lp->host->host_no, \
(pkt)->rport->port_id, ##args); \
} \
@@ -84,14 +84,14 @@ extern unsigned int fc_debug_logging;
#define FC_EXCH_DBG(exch, fmt, args...) \
FC_CHECK_LOGGING(FC_EXCH_LOGGING, \
- printk(KERN_INFO "host%u: xid %4x: " fmt, \
- (exch)->lp->host->host_no, \
- exch->xid, ##args))
+ pr_info("host%u: xid %4x: " fmt, \
+ (exch)->lp->host->host_no, \
+ exch->xid, ##args))
#define FC_SCSI_DBG(lport, fmt, args...) \
FC_CHECK_LOGGING(FC_SCSI_LOGGING, \
- printk(KERN_INFO "host%u: scsi: " fmt, \
- (lport)->host->host_no, ##args))
+ pr_info("host%u: scsi: " fmt, \
+ (lport)->host->host_no, ##args))
/*
* FC-4 Providers.
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 83aa1ef..d518d17 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -582,7 +582,7 @@ static void fc_rport_error(struct fc_rport_priv *rdata, struct fc_frame *fp)
static void fc_rport_error_retry(struct fc_rport_priv *rdata,
struct fc_frame *fp)
{
- unsigned long delay = FC_DEF_E_D_TOV;
+ unsigned long delay = msecs_to_jiffies(FC_DEF_E_D_TOV);
/* make sure this isn't an FC_EX_CLOSED error, never retry those */
if (PTR_ERR(fp) == -FC_EX_CLOSED)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 55b6fc8..74b67d9 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -6644,7 +6644,7 @@ static int
lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
uint32_t flag)
{
- MAILBOX_t *mb;
+ MAILBOX_t *mbx;
struct lpfc_sli *psli = &phba->sli;
uint32_t status, evtctr;
uint32_t ha_copy, hc_copy;
@@ -6698,7 +6698,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
psli = &phba->sli;
- mb = &pmbox->u.mb;
+ mbx = &pmbox->u.mb;
status = MBX_SUCCESS;
if (phba->link_state == LPFC_HBA_ERROR) {
@@ -6713,7 +6713,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
goto out_not_finished;
}
- if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT) {
+ if (mbx->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT) {
if (lpfc_readl(phba->HCregaddr, &hc_copy) ||
!(hc_copy & HC_MBINT_ENA)) {
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
@@ -6767,7 +6767,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
"(%d):0308 Mbox cmd issue - BUSY Data: "
"x%x x%x x%x x%x\n",
pmbox->vport ? pmbox->vport->vpi : 0xffffff,
- mb->mbxCommand, phba->pport->port_state,
+ mbx->mbxCommand, phba->pport->port_state,
psli->sli_flag, flag);
psli->slistat.mbox_busy++;
@@ -6777,15 +6777,15 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
lpfc_debugfs_disc_trc(pmbox->vport,
LPFC_DISC_TRC_MBOX_VPORT,
"MBOX Bsy vport: cmd:x%x mb:x%x x%x",
- (uint32_t)mb->mbxCommand,
- mb->un.varWords[0], mb->un.varWords[1]);
+ (uint32_t)mbx->mbxCommand,
+ mbx->un.varWords[0], mbx->un.varWords[1]);
}
else {
lpfc_debugfs_disc_trc(phba->pport,
LPFC_DISC_TRC_MBOX,
"MBOX Bsy: cmd:x%x mb:x%x x%x",
- (uint32_t)mb->mbxCommand,
- mb->un.varWords[0], mb->un.varWords[1]);
+ (uint32_t)mbx->mbxCommand,
+ mbx->un.varWords[0], mbx->un.varWords[1]);
}
return MBX_BUSY;
@@ -6796,7 +6796,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
/* If we are not polling, we MUST be in SLI2 mode */
if (flag != MBX_POLL) {
if (!(psli->sli_flag & LPFC_SLI_ACTIVE) &&
- (mb->mbxCommand != MBX_KILL_BOARD)) {
+ (mbx->mbxCommand != MBX_KILL_BOARD)) {
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
@@ -6818,23 +6818,23 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
"(%d):0309 Mailbox cmd x%x issue Data: x%x x%x "
"x%x\n",
pmbox->vport ? pmbox->vport->vpi : 0,
- mb->mbxCommand, phba->pport->port_state,
+ mbx->mbxCommand, phba->pport->port_state,
psli->sli_flag, flag);
- if (mb->mbxCommand != MBX_HEARTBEAT) {
+ if (mbx->mbxCommand != MBX_HEARTBEAT) {
if (pmbox->vport) {
lpfc_debugfs_disc_trc(pmbox->vport,
LPFC_DISC_TRC_MBOX_VPORT,
"MBOX Send vport: cmd:x%x mb:x%x x%x",
- (uint32_t)mb->mbxCommand,
- mb->un.varWords[0], mb->un.varWords[1]);
+ (uint32_t)mbx->mbxCommand,
+ mbx->un.varWords[0], mbx->un.varWords[1]);
}
else {
lpfc_debugfs_disc_trc(phba->pport,
LPFC_DISC_TRC_MBOX,
"MBOX Send: cmd:x%x mb:x%x x%x",
- (uint32_t)mb->mbxCommand,
- mb->un.varWords[0], mb->un.varWords[1]);
+ (uint32_t)mbx->mbxCommand,
+ mbx->un.varWords[0], mbx->un.varWords[1]);
}
}
@@ -6842,12 +6842,12 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
evtctr = psli->slistat.mbox_event;
/* next set own bit for the adapter and copy over command word */
- mb->mbxOwner = OWN_CHIP;
+ mbx->mbxOwner = OWN_CHIP;
if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* Populate mbox extension offset word. */
if (pmbox->in_ext_byte_len || pmbox->out_ext_byte_len) {
- *(((uint32_t *)mb) + pmbox->mbox_offset_word)
+ *(((uint32_t *)mbx) + pmbox->mbox_offset_word)
= (uint8_t *)phba->mbox_ext
- (uint8_t *)phba->mbox;
}
@@ -6859,11 +6859,11 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
pmbox->in_ext_byte_len);
}
/* Copy command data to host SLIM area */
- lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
+ lpfc_sli_pcimem_bcopy(mbx, phba->mbox, MAILBOX_CMD_SIZE);
} else {
/* Populate mbox extension offset word. */
if (pmbox->in_ext_byte_len || pmbox->out_ext_byte_len)
- *(((uint32_t *)mb) + pmbox->mbox_offset_word)
+ *(((uint32_t *)mbx) + pmbox->mbox_offset_word)
= MAILBOX_HBA_EXT_OFFSET;
/* Copy the mailbox extension data */
@@ -6873,24 +6873,24 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
pmbox->context2, pmbox->in_ext_byte_len);
}
- if (mb->mbxCommand == MBX_CONFIG_PORT) {
+ if (mbx->mbxCommand == MBX_CONFIG_PORT) {
/* copy command data into host mbox for cmpl */
- lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
+ lpfc_sli_pcimem_bcopy(mbx, phba->mbox, MAILBOX_CMD_SIZE);
}
/* First copy mbox command data to HBA SLIM, skip past first
word */
to_slim = phba->MBslimaddr + sizeof (uint32_t);
- lpfc_memcpy_to_slim(to_slim, &mb->un.varWords[0],
+ lpfc_memcpy_to_slim(to_slim, &mbx->un.varWords[0],
MAILBOX_CMD_SIZE - sizeof (uint32_t));
/* Next copy over first word, with mbxOwner set */
- ldata = *((uint32_t *)mb);
+ ldata = *((uint32_t *)mbx);
to_slim = phba->MBslimaddr;
writel(ldata, to_slim);
readl(to_slim); /* flush */
- if (mb->mbxCommand == MBX_CONFIG_PORT) {
+ if (mbx->mbxCommand == MBX_CONFIG_PORT) {
/* switch over to host mailbox */
psli->sli_flag |= LPFC_SLI_ACTIVE;
}
@@ -6965,7 +6965,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
/* First copy command data */
word0 = *((uint32_t *)phba->mbox);
word0 = le32_to_cpu(word0);
- if (mb->mbxCommand == MBX_CONFIG_PORT) {
+ if (mbx->mbxCommand == MBX_CONFIG_PORT) {
MAILBOX_t *slimmb;
uint32_t slimword0;
/* Check real SLIM for any errors */
@@ -6992,7 +6992,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* copy results back to user */
- lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE);
+ lpfc_sli_pcimem_bcopy(phba->mbox, mbx, MAILBOX_CMD_SIZE);
/* Copy the mailbox extension data */
if (pmbox->out_ext_byte_len && pmbox->context2) {
lpfc_sli_pcimem_bcopy(phba->mbox_ext,
@@ -7001,7 +7001,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
}
} else {
/* First copy command data */
- lpfc_memcpy_from_slim(mb, phba->MBslimaddr,
+ lpfc_memcpy_from_slim(mbx, phba->MBslimaddr,
MAILBOX_CMD_SIZE);
/* Copy the mailbox extension data */
if (pmbox->out_ext_byte_len && pmbox->context2) {
@@ -7016,7 +7016,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
readl(phba->HAregaddr); /* flush */
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
- status = mb->mbxStatus;
+ status = mbx->mbxStatus;
}
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 3b2365c..408d254 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -33,9 +33,9 @@
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "06.504.01.00-rc1"
-#define MEGASAS_RELDATE "Oct. 1, 2012"
-#define MEGASAS_EXT_VERSION "Mon. Oct. 1 17:00:00 PDT 2012"
+#define MEGASAS_VERSION "06.506.00.00-rc1"
+#define MEGASAS_RELDATE "Feb. 9, 2013"
+#define MEGASAS_EXT_VERSION "Sat. Feb. 9 17:00:00 PDT 2013"
/*
* Device IDs
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 66a0fec..9d53540 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -18,7 +18,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* FILE: megaraid_sas_base.c
- * Version : v06.504.01.00-rc1
+ * Version : v06.506.00.00-rc1
*
* Authors: LSI Corporation
* Sreenivas Bagalkote
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 74030af..a7d5668 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -1206,7 +1206,7 @@ megasas_set_pd_lba(struct MPI2_RAID_SCSI_IO_REQUEST *io_request, u8 cdb_len,
MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
}
io_request->Control |= (0x4 << 26);
- io_request->EEDPBlockSize = MEGASAS_EEDPBLOCKSIZE;
+ io_request->EEDPBlockSize = scp->device->sector_size;
} else {
/* Some drives don't support 16/12 byte CDB's, convert to 10 */
if (((cdb_len == 12) || (cdb_len == 16)) &&
@@ -1511,7 +1511,8 @@ megasas_build_dcdb_fusion(struct megasas_instance *instance,
if (scmd->device->channel < MEGASAS_MAX_PD_CHANNELS &&
instance->pd_list[pd_index].driveState == MR_PD_STATE_SYSTEM) {
io_request->Function = 0;
- io_request->DevHandle =
+ if (fusion->fast_path_io)
+ io_request->DevHandle =
local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
io_request->RaidContext.timeoutValue =
local_map_ptr->raidMap.fpPdIoTimeoutSec;
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h
index a7c64f0..f68a3cd 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.h
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h
@@ -61,7 +61,6 @@
#define MEGASAS_SCSI_ADDL_CDB_LEN 0x18
#define MEGASAS_RD_WR_PROTECT_CHECK_ALL 0x20
#define MEGASAS_RD_WR_PROTECT_CHECK_NONE 0x60
-#define MEGASAS_EEDPBLOCKSIZE 512
/*
* Raid context flags
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 5e24e7e..bcb23d2 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -2023,6 +2023,14 @@ _base_display_intel_branding(struct MPT2SAS_ADAPTER *ioc)
printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
MPT2SAS_INTEL_RMS25KB040_BRANDING);
break;
+ case MPT2SAS_INTEL_RMS25LB040_SSDID:
+ printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25LB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25LB080_SSDID:
+ printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25LB080_BRANDING);
+ break;
default:
break;
}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index c6ee7aa..4caaac1 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -165,6 +165,10 @@
"Intel(R) Integrated RAID Module RMS25KB080"
#define MPT2SAS_INTEL_RMS25KB040_BRANDING \
"Intel(R) Integrated RAID Module RMS25KB040"
+#define MPT2SAS_INTEL_RMS25LB040_BRANDING \
+ "Intel(R) Integrated RAID Module RMS25LB040"
+#define MPT2SAS_INTEL_RMS25LB080_BRANDING \
+ "Intel(R) Integrated RAID Module RMS25LB080"
#define MPT2SAS_INTEL_RMS2LL080_BRANDING \
"Intel Integrated RAID Module RMS2LL080"
#define MPT2SAS_INTEL_RMS2LL040_BRANDING \
@@ -180,6 +184,8 @@
#define MPT2SAS_INTEL_RMS25JB040_SSDID 0x3517
#define MPT2SAS_INTEL_RMS25KB080_SSDID 0x3518
#define MPT2SAS_INTEL_RMS25KB040_SSDID 0x3519
+#define MPT2SAS_INTEL_RMS25LB040_SSDID 0x351A
+#define MPT2SAS_INTEL_RMS25LB080_SSDID 0x351B
#define MPT2SAS_INTEL_RMS2LL080_SSDID 0x350E
#define MPT2SAS_INTEL_RMS2LL040_SSDID 0x350F
#define MPT2SAS_INTEL_RS25GB008_SSDID 0x3000
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index 078c639..532110f 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -316,10 +316,13 @@ static int mvs_task_prep_smp(struct mvs_info *mvi,
struct mvs_task_exec_info *tei)
{
int elem, rc, i;
+ struct sas_ha_struct *sha = mvi->sas;
struct sas_task *task = tei->task;
struct mvs_cmd_hdr *hdr = tei->hdr;
struct domain_device *dev = task->dev;
struct asd_sas_port *sas_port = dev->port;
+ struct sas_phy *sphy = dev->phy;
+ struct asd_sas_phy *sas_phy = sha->sas_phy[sphy->number];
struct scatterlist *sg_req, *sg_resp;
u32 req_len, resp_len, tag = tei->tag;
void *buf_tmp;
@@ -392,7 +395,7 @@ static int mvs_task_prep_smp(struct mvs_info *mvi,
slot->tx = mvi->tx_prod;
mvi->tx[mvi->tx_prod] = cpu_to_le32((TXQ_CMD_SMP << TXQ_CMD_SHIFT) |
TXQ_MODE_I | tag |
- (sas_port->phy_mask << TXQ_PHY_SHIFT));
+ (MVS_PHY_ID << TXQ_PHY_SHIFT));
hdr->flags |= flags;
hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | ((req_len - 4) / 4));
@@ -438,11 +441,14 @@ static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
static int mvs_task_prep_ata(struct mvs_info *mvi,
struct mvs_task_exec_info *tei)
{
+ struct sas_ha_struct *sha = mvi->sas;
struct sas_task *task = tei->task;
struct domain_device *dev = task->dev;
struct mvs_device *mvi_dev = dev->lldd_dev;
struct mvs_cmd_hdr *hdr = tei->hdr;
struct asd_sas_port *sas_port = dev->port;
+ struct sas_phy *sphy = dev->phy;
+ struct asd_sas_phy *sas_phy = sha->sas_phy[sphy->number];
struct mvs_slot_info *slot;
void *buf_prd;
u32 tag = tei->tag, hdr_tag;
@@ -462,7 +468,7 @@ static int mvs_task_prep_ata(struct mvs_info *mvi,
slot->tx = mvi->tx_prod;
del_q = TXQ_MODE_I | tag |
(TXQ_CMD_STP << TXQ_CMD_SHIFT) |
- (sas_port->phy_mask << TXQ_PHY_SHIFT) |
+ (MVS_PHY_ID << TXQ_PHY_SHIFT) |
(mvi_dev->taskfileset << TXQ_SRS_SHIFT);
mvi->tx[mvi->tx_prod] = cpu_to_le32(del_q);
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index 2ae77a0..9f3cc13 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -76,6 +76,7 @@ extern struct kmem_cache *mvs_task_list_cache;
(__mc) != 0 ; \
(++__lseq), (__mc) >>= 1)
+#define MVS_PHY_ID (1U << sas_phy->id)
#define MV_INIT_DELAYED_WORK(w, f, d) INIT_DELAYED_WORK(w, f)
#define UNASSOC_D2H_FIS(id) \
((void *) mvi->rx_fis + 0x100 * id)
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index c06b8e5..d8293f2 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -144,6 +144,10 @@ static int _osd_get_print_system_info(struct osd_dev *od,
odi->osdname_len = get_attrs[a].len;
/* Avoid NULL for memcmp optimization 0-length is good enough */
odi->osdname = kzalloc(odi->osdname_len + 1, GFP_KERNEL);
+ if (!odi->osdname) {
+ ret = -ENOMEM;
+ goto out;
+ }
if (odi->osdname_len)
memcpy(odi->osdname, get_attrs[a].val_ptr, odi->osdname_len);
OSD_INFO("OSD_NAME [%s]\n", odi->osdname);
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 4c9fe73..3d5e522 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -140,7 +140,8 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
for (i = 0; i < USI_MAX_MEMCNT; i++) {
if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
pci_free_consistent(pm8001_ha->pdev,
- pm8001_ha->memoryMap.region[i].element_size,
+ (pm8001_ha->memoryMap.region[i].total_len +
+ pm8001_ha->memoryMap.region[i].alignment),
pm8001_ha->memoryMap.region[i].virt_ptr,
pm8001_ha->memoryMap.region[i].phys_addr);
}
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 83d7984..1d82eef 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -1272,22 +1272,29 @@ qla2x00_thermal_temp_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
- int rval = QLA_FUNCTION_FAILED;
- uint16_t temp, frac;
+ uint16_t temp = 0;
- if (!vha->hw->flags.thermal_supported)
- return snprintf(buf, PAGE_SIZE, "\n");
+ if (!vha->hw->thermal_support) {
+ ql_log(ql_log_warn, vha, 0x70db,
+ "Thermal not supported by this card.\n");
+ goto done;
+ }
- temp = frac = 0;
- if (qla2x00_reset_active(vha))
- ql_log(ql_log_warn, vha, 0x707b,
- "ISP reset active.\n");
- else if (!vha->hw->flags.eeh_busy)
- rval = qla2x00_get_thermal_temp(vha, &temp, &frac);
- if (rval != QLA_SUCCESS)
- return snprintf(buf, PAGE_SIZE, "\n");
+ if (qla2x00_reset_active(vha)) {
+ ql_log(ql_log_warn, vha, 0x70dc, "ISP reset active.\n");
+ goto done;
+ }
+
+ if (vha->hw->flags.eeh_busy) {
+ ql_log(ql_log_warn, vha, 0x70dd, "PCI EEH busy.\n");
+ goto done;
+ }
+
+ if (qla2x00_get_thermal_temp(vha, &temp) == QLA_SUCCESS)
+ return snprintf(buf, PAGE_SIZE, "%d\n", temp);
- return snprintf(buf, PAGE_SIZE, "%d.%02d\n", temp, frac);
+done:
+ return snprintf(buf, PAGE_SIZE, "\n");
}
static ssize_t
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 9f34ded..ad54099 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -27,7 +27,7 @@ void
qla2x00_bsg_sp_free(void *data, void *ptr)
{
srb_t *sp = (srb_t *)ptr;
- struct scsi_qla_host *vha = (scsi_qla_host_t *)data;
+ struct scsi_qla_host *vha = sp->fcport->vha;
struct fc_bsg_job *bsg_job = sp->u.bsg_job;
struct qla_hw_data *ha = vha->hw;
@@ -40,7 +40,7 @@ qla2x00_bsg_sp_free(void *data, void *ptr)
if (sp->type == SRB_CT_CMD ||
sp->type == SRB_ELS_CMD_HST)
kfree(sp->fcport);
- mempool_free(sp, vha->hw->srb_mempool);
+ qla2x00_rel_sp(vha, sp);
}
int
@@ -368,7 +368,7 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job)
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x700e,
"qla2x00_start_sp failed = %d\n", rval);
- mempool_free(sp, ha->srb_mempool);
+ qla2x00_rel_sp(vha, sp);
rval = -EIO;
goto done_unmap_sg;
}
@@ -515,7 +515,7 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job)
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x7017,
"qla2x00_start_sp failed=%d.\n", rval);
- mempool_free(sp, ha->srb_mempool);
+ qla2x00_rel_sp(vha, sp);
rval = -EIO;
goto done_free_fcport;
}
@@ -531,6 +531,75 @@ done_unmap_sg:
done:
return rval;
}
+
+/* Disable loopback mode */
+static inline int
+qla81xx_reset_loopback_mode(scsi_qla_host_t *vha, uint16_t *config,
+ int wait, int wait2)
+{
+ int ret = 0;
+ int rval = 0;
+ uint16_t new_config[4];
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_QLA81XX(ha) && !IS_QLA8031(ha))
+ goto done_reset_internal;
+
+ memset(new_config, 0 , sizeof(new_config));
+ if ((config[0] & INTERNAL_LOOPBACK_MASK) >> 1 ==
+ ENABLE_INTERNAL_LOOPBACK ||
+ (config[0] & INTERNAL_LOOPBACK_MASK) >> 1 ==
+ ENABLE_EXTERNAL_LOOPBACK) {
+ new_config[0] = config[0] & ~INTERNAL_LOOPBACK_MASK;
+ ql_dbg(ql_dbg_user, vha, 0x70bf, "new_config[0]=%02x\n",
+ (new_config[0] & INTERNAL_LOOPBACK_MASK));
+ memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ;
+
+ ha->notify_dcbx_comp = wait;
+ ha->notify_lb_portup_comp = wait2;
+
+ ret = qla81xx_set_port_config(vha, new_config);
+ if (ret != QLA_SUCCESS) {
+ ql_log(ql_log_warn, vha, 0x7025,
+ "Set port config failed.\n");
+ ha->notify_dcbx_comp = 0;
+ ha->notify_lb_portup_comp = 0;
+ rval = -EINVAL;
+ goto done_reset_internal;
+ }
+
+ /* Wait for DCBX complete event */
+ if (wait && !wait_for_completion_timeout(&ha->dcbx_comp,
+ (DCBX_COMP_TIMEOUT * HZ))) {
+ ql_dbg(ql_dbg_user, vha, 0x7026,
+ "DCBX completion not received.\n");
+ ha->notify_dcbx_comp = 0;
+ ha->notify_lb_portup_comp = 0;
+ rval = -EINVAL;
+ goto done_reset_internal;
+ } else
+ ql_dbg(ql_dbg_user, vha, 0x7027,
+ "DCBX completion received.\n");
+
+ if (wait2 &&
+ !wait_for_completion_timeout(&ha->lb_portup_comp,
+ (LB_PORTUP_COMP_TIMEOUT * HZ))) {
+ ql_dbg(ql_dbg_user, vha, 0x70c5,
+ "Port up completion not received.\n");
+ ha->notify_lb_portup_comp = 0;
+ rval = -EINVAL;
+ goto done_reset_internal;
+ } else
+ ql_dbg(ql_dbg_user, vha, 0x70c6,
+ "Port up completion received.\n");
+
+ ha->notify_dcbx_comp = 0;
+ ha->notify_lb_portup_comp = 0;
+ }
+done_reset_internal:
+ return rval;
+}
+
/*
* Set the port configuration to enable the internal or external loopback
* depending on the loopback mode.
@@ -566,9 +635,19 @@ qla81xx_set_loopback_mode(scsi_qla_host_t *vha, uint16_t *config,
}
/* Wait for DCBX complete event */
- if (!wait_for_completion_timeout(&ha->dcbx_comp, (20 * HZ))) {
+ if (!wait_for_completion_timeout(&ha->dcbx_comp,
+ (DCBX_COMP_TIMEOUT * HZ))) {
ql_dbg(ql_dbg_user, vha, 0x7022,
- "State change notification not received.\n");
+ "DCBX completion not received.\n");
+ ret = qla81xx_reset_loopback_mode(vha, new_config, 0, 0);
+ /*
+ * If the reset of the loopback mode doesn't work take a FCoE
+ * dump and reset the chip.
+ */
+ if (ret) {
+ ha->isp_ops->fw_dump(vha, 0);
+ set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ }
rval = -EINVAL;
} else {
if (ha->flags.idc_compl_status) {
@@ -578,7 +657,7 @@ qla81xx_set_loopback_mode(scsi_qla_host_t *vha, uint16_t *config,
ha->flags.idc_compl_status = 0;
} else
ql_dbg(ql_dbg_user, vha, 0x7023,
- "State change received.\n");
+ "DCBX completion received.\n");
}
ha->notify_dcbx_comp = 0;
@@ -587,57 +666,6 @@ done_set_internal:
return rval;
}
-/* Disable loopback mode */
-static inline int
-qla81xx_reset_loopback_mode(scsi_qla_host_t *vha, uint16_t *config,
- int wait)
-{
- int ret = 0;
- int rval = 0;
- uint16_t new_config[4];
- struct qla_hw_data *ha = vha->hw;
-
- if (!IS_QLA81XX(ha) && !IS_QLA8031(ha))
- goto done_reset_internal;
-
- memset(new_config, 0 , sizeof(new_config));
- if ((config[0] & INTERNAL_LOOPBACK_MASK) >> 1 ==
- ENABLE_INTERNAL_LOOPBACK ||
- (config[0] & INTERNAL_LOOPBACK_MASK) >> 1 ==
- ENABLE_EXTERNAL_LOOPBACK) {
- new_config[0] = config[0] & ~INTERNAL_LOOPBACK_MASK;
- ql_dbg(ql_dbg_user, vha, 0x70bf, "new_config[0]=%02x\n",
- (new_config[0] & INTERNAL_LOOPBACK_MASK));
- memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ;
-
- ha->notify_dcbx_comp = wait;
- ret = qla81xx_set_port_config(vha, new_config);
- if (ret != QLA_SUCCESS) {
- ql_log(ql_log_warn, vha, 0x7025,
- "Set port config failed.\n");
- ha->notify_dcbx_comp = 0;
- rval = -EINVAL;
- goto done_reset_internal;
- }
-
- /* Wait for DCBX complete event */
- if (wait && !wait_for_completion_timeout(&ha->dcbx_comp,
- (20 * HZ))) {
- ql_dbg(ql_dbg_user, vha, 0x7026,
- "State change notification not received.\n");
- ha->notify_dcbx_comp = 0;
- rval = -EINVAL;
- goto done_reset_internal;
- } else
- ql_dbg(ql_dbg_user, vha, 0x7027,
- "State change received.\n");
-
- ha->notify_dcbx_comp = 0;
- }
-done_reset_internal:
- return rval;
-}
-
static int
qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
{
@@ -739,6 +767,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
if (IS_QLA81XX(ha) || IS_QLA8031(ha)) {
memset(config, 0, sizeof(config));
memset(new_config, 0, sizeof(new_config));
+
if (qla81xx_get_port_config(vha, config)) {
ql_log(ql_log_warn, vha, 0x701f,
"Get port config failed.\n");
@@ -746,6 +775,14 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
goto done_free_dma_rsp;
}
+ if ((config[0] & INTERNAL_LOOPBACK_MASK) != 0) {
+ ql_dbg(ql_dbg_user, vha, 0x70c4,
+ "Loopback operation already in "
+ "progress.\n");
+ rval = -EAGAIN;
+ goto done_free_dma_rsp;
+ }
+
ql_dbg(ql_dbg_user, vha, 0x70c0,
"elreq.options=%04x\n", elreq.options);
@@ -755,7 +792,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
config, new_config, elreq.options);
else
rval = qla81xx_reset_loopback_mode(vha,
- config, 1);
+ config, 1, 0);
else
rval = qla81xx_set_loopback_mode(vha, config,
new_config, elreq.options);
@@ -772,14 +809,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
command_sent = INT_DEF_LB_LOOPBACK_CMD;
rval = qla2x00_loopback_test(vha, &elreq, response);
- if (new_config[0]) {
- /* Revert back to original port config
- * Also clear internal loopback
- */
- qla81xx_reset_loopback_mode(vha,
- new_config, 0);
- }
-
if (response[0] == MBS_COMMAND_ERROR &&
response[1] == MBS_LB_RESET) {
ql_log(ql_log_warn, vha, 0x7029,
@@ -788,15 +817,39 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
qla2xxx_wake_dpc(vha);
qla2x00_wait_for_chip_reset(vha);
/* Also reset the MPI */
- if (qla81xx_restart_mpi_firmware(vha) !=
- QLA_SUCCESS) {
- ql_log(ql_log_warn, vha, 0x702a,
- "MPI reset failed.\n");
+ if (IS_QLA81XX(ha)) {
+ if (qla81xx_restart_mpi_firmware(vha) !=
+ QLA_SUCCESS) {
+ ql_log(ql_log_warn, vha, 0x702a,
+ "MPI reset failed.\n");
+ }
}
rval = -EIO;
goto done_free_dma_rsp;
}
+
+ if (new_config[0]) {
+ int ret;
+
+ /* Revert back to original port config
+ * Also clear internal loopback
+ */
+ ret = qla81xx_reset_loopback_mode(vha,
+ new_config, 0, 1);
+ if (ret) {
+ /*
+ * If the reset of the loopback mode
+ * doesn't work take FCoE dump and then
+ * reset the chip.
+ */
+ ha->isp_ops->fw_dump(vha, 0);
+ set_bit(ISP_ABORT_NEEDED,
+ &vha->dpc_flags);
+ }
+
+ }
+
} else {
type = "FC_BSG_HST_VENDOR_LOOPBACK";
ql_dbg(ql_dbg_user, vha, 0x702b,
@@ -1950,7 +2003,7 @@ qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job)
if (!req)
continue;
- for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+ for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) {
sp = req->outstanding_cmds[cnt];
if (sp) {
if (((sp->type == SRB_CT_CMD) ||
@@ -1985,6 +2038,6 @@ done:
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (bsg_job->request->msgcode == FC_BSG_HST_CT)
kfree(sp->fcport);
- mempool_free(sp, ha->srb_mempool);
+ qla2x00_rel_sp(vha, sp);
return 0;
}
diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h
index 37b8b7b..e9f6b9b 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.h
+++ b/drivers/scsi/qla2xxx/qla_bsg.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 53f9e49..1626de5 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -11,20 +11,21 @@
* ----------------------------------------------------------------------
* | Level | Last Value Used | Holes |
* ----------------------------------------------------------------------
- * | Module Init and Probe | 0x0125 | 0x4b,0xba,0xfa |
- * | Mailbox commands | 0x114f | 0x111a-0x111b |
+ * | Module Init and Probe | 0x0126 | 0x4b,0xba,0xfa |
+ * | Mailbox commands | 0x115b | 0x111a-0x111b |
* | | | 0x112c-0x112e |
* | | | 0x113a |
* | Device Discovery | 0x2087 | 0x2020-0x2022, |
* | | | 0x2016 |
- * | Queue Command and IO tracing | 0x3030 | 0x3006-0x300b |
+ * | Queue Command and IO tracing | 0x3031 | 0x3006-0x300b |
* | | | 0x3027-0x3028 |
* | | | 0x302d-0x302e |
* | DPC Thread | 0x401d | 0x4002,0x4013 |
* | Async Events | 0x5071 | 0x502b-0x502f |
* | | | 0x5047,0x5052 |
* | Timer Routines | 0x6011 | |
- * | User Space Interactions | 0x70c3 | 0x7018,0x702e, |
+ * | User Space Interactions | 0x70c4 | 0x7018,0x702e, |
+ * | | | 0x7020,0x7024, |
* | | | 0x7039,0x7045, |
* | | | 0x7073-0x7075, |
* | | | 0x708c, |
@@ -35,11 +36,11 @@
* | | | 0x800b,0x8039 |
* | AER/EEH | 0x9011 | |
* | Virtual Port | 0xa007 | |
- * | ISP82XX Specific | 0xb084 | 0xb002,0xb024 |
+ * | ISP82XX Specific | 0xb086 | 0xb002,0xb024 |
* | MultiQ | 0xc00c | |
* | Misc | 0xd010 | |
- * | Target Mode | 0xe06f | |
- * | Target Mode Management | 0xf071 | |
+ * | Target Mode | 0xe070 | |
+ * | Target Mode Management | 0xf072 | |
* | Target Mode Task Management | 0x1000b | |
* ----------------------------------------------------------------------
*/
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index 8f911c0..35e20b4 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 6e7727f..c650991 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -37,6 +37,7 @@
#include "qla_nx.h"
#define QLA2XXX_DRIVER_NAME "qla2xxx"
#define QLA2XXX_APIDEV "ql2xapidev"
+#define QLA2XXX_MANUFACTURER "QLogic Corporation"
/*
* We have MAILBOX_REGISTER_COUNT sized arrays in a few places,
@@ -253,8 +254,8 @@
#define LOOP_DOWN_TIME 255 /* 240 */
#define LOOP_DOWN_RESET (LOOP_DOWN_TIME - 30)
-/* Maximum outstanding commands in ISP queues (1-65535) */
-#define MAX_OUTSTANDING_COMMANDS 1024
+#define DEFAULT_OUTSTANDING_COMMANDS 1024
+#define MIN_OUTSTANDING_COMMANDS 128
/* ISP request and response entry counts (37-65535) */
#define REQUEST_ENTRY_CNT_2100 128 /* Number of request entries. */
@@ -537,6 +538,8 @@ struct device_reg_25xxmq {
uint32_t req_q_out;
uint32_t rsp_q_in;
uint32_t rsp_q_out;
+ uint32_t atio_q_in;
+ uint32_t atio_q_out;
};
typedef union {
@@ -563,6 +566,9 @@ typedef union {
&(reg)->u.isp2100.mailbox5 : \
&(reg)->u.isp2300.rsp_q_out)
+#define ISP_ATIO_Q_IN(vha) (vha->hw->tgt.atio_q_in)
+#define ISP_ATIO_Q_OUT(vha) (vha->hw->tgt.atio_q_out)
+
#define MAILBOX_REG(ha, reg, num) \
(IS_QLA2100(ha) || IS_QLA2200(ha) ? \
(num < 8 ? \
@@ -762,8 +768,8 @@ typedef struct {
#define MBC_PORT_LOGOUT 0x56 /* Port Logout request */
#define MBC_SEND_RNID_ELS 0x57 /* Send RNID ELS request */
#define MBC_SET_RNID_PARAMS 0x59 /* Set RNID parameters */
-#define MBC_GET_RNID_PARAMS 0x5a /* Data Rate */
-#define MBC_DATA_RATE 0x5d /* Get RNID parameters */
+#define MBC_GET_RNID_PARAMS 0x5a /* Get RNID parameters */
+#define MBC_DATA_RATE 0x5d /* Data Rate */
#define MBC_INITIALIZE_FIRMWARE 0x60 /* Initialize firmware */
#define MBC_INITIATE_LIP 0x62 /* Initiate Loop */
/* Initialization Procedure */
@@ -809,6 +815,7 @@ typedef struct {
#define MBC_HOST_MEMORY_COPY 0x53 /* Host Memory Copy. */
#define MBC_SEND_RNFT_ELS 0x5e /* Send RNFT ELS request */
#define MBC_GET_LINK_PRIV_STATS 0x6d /* Get link & private data. */
+#define MBC_LINK_INITIALIZATION 0x72 /* Do link initialization. */
#define MBC_SET_VENDOR_ID 0x76 /* Set Vendor ID. */
#define MBC_PORT_RESET 0x120 /* Port Reset */
#define MBC_SET_PORT_CONFIG 0x122 /* Set port configuration */
@@ -856,6 +863,9 @@ typedef struct {
#define MBX_1 BIT_1
#define MBX_0 BIT_0
+#define RNID_TYPE_SET_VERSION 0x9
+#define RNID_TYPE_ASIC_TEMP 0xC
+
/*
* Firmware state codes from get firmware state mailbox command
*/
@@ -1841,9 +1851,6 @@ typedef struct fc_port {
uint8_t scan_state;
} fc_port_t;
-#define QLA_FCPORT_SCAN_NONE 0
-#define QLA_FCPORT_SCAN_FOUND 1
-
/*
* Fibre channel port/lun states.
*/
@@ -2533,8 +2540,10 @@ struct req_que {
uint16_t qos;
uint16_t vp_idx;
struct rsp_que *rsp;
- srb_t *outstanding_cmds[MAX_OUTSTANDING_COMMANDS];
+ srb_t **outstanding_cmds;
uint32_t current_outstanding_cmd;
+ uint16_t num_outstanding_cmds;
+#define MAX_Q_DEPTH 32
int max_q_depth;
};
@@ -2557,11 +2566,13 @@ struct qlt_hw_data {
struct atio *atio_ring_ptr; /* Current address. */
uint16_t atio_ring_index; /* Current index. */
uint16_t atio_q_length;
+ uint32_t __iomem *atio_q_in;
+ uint32_t __iomem *atio_q_out;
void *target_lport_ptr;
struct qla_tgt_func_tmpl *tgt_ops;
struct qla_tgt *qla_tgt;
- struct qla_tgt_cmd *cmds[MAX_OUTSTANDING_COMMANDS];
+ struct qla_tgt_cmd *cmds[DEFAULT_OUTSTANDING_COMMANDS];
uint16_t current_handle;
struct qla_tgt_vp_map *tgt_vp_map;
@@ -2618,7 +2629,6 @@ struct qla_hw_data {
uint32_t nic_core_hung:1;
uint32_t quiesce_owner:1;
- uint32_t thermal_supported:1;
uint32_t nic_core_reset_hdlr_active:1;
uint32_t nic_core_reset_owner:1;
uint32_t isp82xx_no_md_cap:1;
@@ -2788,6 +2798,8 @@ struct qla_hw_data {
#define IS_PI_SPLIT_DET_CAPABLE_HBA(ha) (IS_QLA83XX(ha))
#define IS_PI_SPLIT_DET_CAPABLE(ha) (IS_PI_SPLIT_DET_CAPABLE_HBA(ha) && \
(((ha)->fw_attributes_h << 16 | (ha)->fw_attributes) & BIT_22))
+#define IS_ATIO_MSIX_CAPABLE(ha) (IS_QLA83XX(ha))
+#define IS_TGT_MODE_CAPABLE(ha) (ha->tgt.atio_q_length)
/* HBA serial number */
uint8_t serial0;
@@ -2870,7 +2882,13 @@ struct qla_hw_data {
struct completion mbx_cmd_comp; /* Serialize mbx access */
struct completion mbx_intr_comp; /* Used for completion notification */
struct completion dcbx_comp; /* For set port config notification */
+ struct completion lb_portup_comp; /* Used to wait for link up during
+ * loopback */
+#define DCBX_COMP_TIMEOUT 20
+#define LB_PORTUP_COMP_TIMEOUT 10
+
int notify_dcbx_comp;
+ int notify_lb_portup_comp;
struct mutex selflogin_lock;
/* Basic firmware related information. */
@@ -2887,6 +2905,7 @@ struct qla_hw_data {
#define RISC_START_ADDRESS_2300 0x800
#define RISC_START_ADDRESS_2400 0x100000
uint16_t fw_xcb_count;
+ uint16_t fw_iocb_count;
uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */
uint8_t fw_seriallink_options[4];
@@ -3056,7 +3075,16 @@ struct qla_hw_data {
struct work_struct idc_state_handler;
struct work_struct nic_core_unrecoverable;
+#define HOST_QUEUE_RAMPDOWN_INTERVAL (60 * HZ)
+#define HOST_QUEUE_RAMPUP_INTERVAL (30 * HZ)
+ unsigned long host_last_rampdown_time;
+ unsigned long host_last_rampup_time;
+ int cfg_lun_q_depth;
+
struct qlt_hw_data tgt;
+ uint16_t thermal_support;
+#define THERMAL_SUPPORT_I2C BIT_0
+#define THERMAL_SUPPORT_ISP BIT_1
};
/*
@@ -3115,6 +3143,8 @@ typedef struct scsi_qla_host {
#define MPI_RESET_NEEDED 19 /* Initiate MPI FW reset */
#define ISP_QUIESCE_NEEDED 20 /* Driver need some quiescence */
#define SCR_PENDING 21 /* SCR in target mode */
+#define HOST_RAMP_DOWN_QUEUE_DEPTH 22
+#define HOST_RAMP_UP_QUEUE_DEPTH 23
uint32_t device_flags;
#define SWITCH_FOUND BIT_0
@@ -3248,8 +3278,6 @@ struct qla_tgt_vp_map {
#define NVRAM_DELAY() udelay(10)
-#define INVALID_HANDLE (MAX_OUTSTANDING_COMMANDS+1)
-
/*
* Flash support definitions
*/
diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c
index 706c4f7..792a292 100644
--- a/drivers/scsi/qla2xxx/qla_dfs.c
+++ b/drivers/scsi/qla2xxx/qla_dfs.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index be6d61a..1ac2b0e 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -300,7 +300,8 @@ struct init_cb_24xx {
uint32_t prio_request_q_address[2];
uint16_t msix;
- uint8_t reserved_2[6];
+ uint16_t msix_atio;
+ uint8_t reserved_2[4];
uint16_t atio_q_inpointer;
uint16_t atio_q_length;
@@ -1387,9 +1388,7 @@ struct qla_flt_header {
#define FLT_REG_FCP_PRIO_0 0x87
#define FLT_REG_FCP_PRIO_1 0x88
#define FLT_REG_FCOE_FW 0xA4
-#define FLT_REG_FCOE_VPD_0 0xA9
#define FLT_REG_FCOE_NVRAM_0 0xAA
-#define FLT_REG_FCOE_VPD_1 0xAB
#define FLT_REG_FCOE_NVRAM_1 0xAC
struct qla_flt_region {
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 2411d1a..eb3ca21 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -55,7 +55,7 @@ extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *);
extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *);
-extern int qla2x00_get_thermal_temp(scsi_qla_host_t *, uint16_t *, uint16_t *);
+extern int qla2x00_get_thermal_temp(scsi_qla_host_t *, uint16_t *);
extern void qla84xx_put_chip(struct scsi_qla_host *);
@@ -84,6 +84,9 @@ extern int qla83xx_nic_core_reset(scsi_qla_host_t *);
extern void qla83xx_reset_ownership(scsi_qla_host_t *);
extern int qla2xxx_mctp_dump(scsi_qla_host_t *);
+extern int
+qla2x00_alloc_outstanding_cmds(struct qla_hw_data *, struct req_que *);
+
/*
* Global Data in qla_os.c source file.
*/
@@ -94,6 +97,7 @@ extern int qlport_down_retry;
extern int ql2xplogiabsentdevice;
extern int ql2xloginretrycount;
extern int ql2xfdmienable;
+extern int ql2xmaxqdepth;
extern int ql2xallocfwdump;
extern int ql2xextended_error_logging;
extern int ql2xiidmaenable;
@@ -278,6 +282,9 @@ extern int
qla2x00_get_port_name(scsi_qla_host_t *, uint16_t, uint8_t *, uint8_t);
extern int
+qla24xx_link_initialize(scsi_qla_host_t *);
+
+extern int
qla2x00_lip_reset(scsi_qla_host_t *);
extern int
@@ -351,6 +358,9 @@ extern int
qla2x00_disable_fce_trace(scsi_qla_host_t *, uint64_t *, uint64_t *);
extern int
+qla2x00_set_driver_version(scsi_qla_host_t *, char *);
+
+extern int
qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *,
uint16_t, uint16_t, uint16_t, uint16_t);
@@ -436,6 +446,7 @@ extern uint8_t *qla25xx_read_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t,
uint32_t);
extern int qla25xx_write_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t,
uint32_t);
+extern int qla2x00_is_a_vp_did(scsi_qla_host_t *, uint32_t);
extern int qla2x00_beacon_on(struct scsi_qla_host *);
extern int qla2x00_beacon_off(struct scsi_qla_host *);
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 01efc0e..9b45525 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -1328,8 +1328,8 @@ qla2x00_fdmi_rhba(scsi_qla_host_t *vha)
/* Manufacturer. */
eiter = (struct ct_fdmi_hba_attr *) (entries + size);
eiter->type = __constant_cpu_to_be16(FDMI_HBA_MANUFACTURER);
- strcpy(eiter->a.manufacturer, "QLogic Corporation");
- alen = strlen(eiter->a.manufacturer);
+ alen = strlen(QLA2XXX_MANUFACTURER);
+ strncpy(eiter->a.manufacturer, QLA2XXX_MANUFACTURER, alen + 1);
alen += (alen & 3) ? (4 - (alen & 3)) : 4;
eiter->len = cpu_to_be16(4 + alen);
size += 4 + alen;
@@ -1649,8 +1649,8 @@ qla2x00_fdmi_rpa(scsi_qla_host_t *vha)
/* OS device name. */
eiter = (struct ct_fdmi_port_attr *) (entries + size);
eiter->type = __constant_cpu_to_be16(FDMI_PORT_OS_DEVICE_NAME);
- strcpy(eiter->a.os_dev_name, QLA2XXX_DRIVER_NAME);
- alen = strlen(eiter->a.os_dev_name);
+ alen = strlen(QLA2XXX_DRIVER_NAME);
+ strncpy(eiter->a.os_dev_name, QLA2XXX_DRIVER_NAME, alen + 1);
alen += (alen & 3) ? (4 - (alen & 3)) : 4;
eiter->len = cpu_to_be16(4 + alen);
size += 4 + alen;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 563eee3..edf4d14 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -70,9 +70,7 @@ qla2x00_sp_free(void *data, void *ptr)
struct scsi_qla_host *vha = (scsi_qla_host_t *)data;
del_timer(&iocb->timer);
- mempool_free(sp, vha->hw->srb_mempool);
-
- QLA_VHA_MARK_NOT_BUSY(vha);
+ qla2x00_rel_sp(vha, sp);
}
/* Asynchronous Login/Logout Routines -------------------------------------- */
@@ -525,7 +523,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
vha->flags.reset_active = 0;
ha->flags.pci_channel_io_perm_failure = 0;
ha->flags.eeh_busy = 0;
- ha->flags.thermal_supported = 1;
+ ha->thermal_support = THERMAL_SUPPORT_I2C|THERMAL_SUPPORT_ISP;
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
atomic_set(&vha->loop_state, LOOP_DOWN);
vha->device_flags = DFLG_NO_CABLE;
@@ -621,6 +619,8 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha))
qla24xx_read_fcp_prio_cfg(vha);
+ qla2x00_set_driver_version(vha, QLA2XXX_VERSION);
+
return (rval);
}
@@ -1559,6 +1559,47 @@ done:
return rval;
}
+int
+qla2x00_alloc_outstanding_cmds(struct qla_hw_data *ha, struct req_que *req)
+{
+ /* Don't try to reallocate the array */
+ if (req->outstanding_cmds)
+ return QLA_SUCCESS;
+
+ if (!IS_FWI2_CAPABLE(ha) || (ha->mqiobase &&
+ (ql2xmultique_tag || ql2xmaxqueues > 1)))
+ req->num_outstanding_cmds = DEFAULT_OUTSTANDING_COMMANDS;
+ else {
+ if (ha->fw_xcb_count <= ha->fw_iocb_count)
+ req->num_outstanding_cmds = ha->fw_xcb_count;
+ else
+ req->num_outstanding_cmds = ha->fw_iocb_count;
+ }
+
+ req->outstanding_cmds = kzalloc(sizeof(srb_t *) *
+ req->num_outstanding_cmds, GFP_KERNEL);
+
+ if (!req->outstanding_cmds) {
+ /*
+ * Try to allocate a minimal size just so we can get through
+ * initialization.
+ */
+ req->num_outstanding_cmds = MIN_OUTSTANDING_COMMANDS;
+ req->outstanding_cmds = kzalloc(sizeof(srb_t *) *
+ req->num_outstanding_cmds, GFP_KERNEL);
+
+ if (!req->outstanding_cmds) {
+ ql_log(ql_log_fatal, NULL, 0x0126,
+ "Failed to allocate memory for "
+ "outstanding_cmds for req_que %p.\n", req);
+ req->num_outstanding_cmds = 0;
+ return QLA_FUNCTION_FAILED;
+ }
+ }
+
+ return QLA_SUCCESS;
+}
+
/**
* qla2x00_setup_chip() - Load and start RISC firmware.
* @ha: HA context
@@ -1628,9 +1669,18 @@ enable_82xx_npiv:
MIN_MULTI_ID_FABRIC - 1;
}
qla2x00_get_resource_cnts(vha, NULL,
- &ha->fw_xcb_count, NULL, NULL,
+ &ha->fw_xcb_count, NULL, &ha->fw_iocb_count,
&ha->max_npiv_vports, NULL);
+ /*
+ * Allocate the array of outstanding commands
+ * now that we know the firmware resources.
+ */
+ rval = qla2x00_alloc_outstanding_cmds(ha,
+ vha->req);
+ if (rval != QLA_SUCCESS)
+ goto failed;
+
if (!fw_major_version && ql2xallocfwdump
&& !IS_QLA82XX(ha))
qla2x00_alloc_fw_dump(vha);
@@ -1914,7 +1964,7 @@ qla24xx_config_rings(struct scsi_qla_host *vha)
WRT_REG_DWORD(®->isp24.rsp_q_in, 0);
WRT_REG_DWORD(®->isp24.rsp_q_out, 0);
}
- qlt_24xx_config_rings(vha, reg);
+ qlt_24xx_config_rings(vha);
/* PCI posting */
RD_REG_DWORD(&ioreg->hccr);
@@ -1948,7 +1998,7 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
req = ha->req_q_map[que];
if (!req)
continue;
- for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+ for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++)
req->outstanding_cmds[cnt] = NULL;
req->current_outstanding_cmd = 1;
@@ -2157,6 +2207,7 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
char connect_type[22];
struct qla_hw_data *ha = vha->hw;
unsigned long flags;
+ scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
/* Get host addresses. */
rval = qla2x00_get_adapter_id(vha,
@@ -2170,6 +2221,13 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
} else {
ql_log(ql_log_warn, vha, 0x2009,
"Unable to get host loop ID.\n");
+ if (IS_FWI2_CAPABLE(ha) && (vha == base_vha) &&
+ (rval == QLA_COMMAND_ERROR && loop_id == 0x1b)) {
+ ql_log(ql_log_warn, vha, 0x1151,
+ "Doing link init.\n");
+ if (qla24xx_link_initialize(vha) == QLA_SUCCESS)
+ return rval;
+ }
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
}
return (rval);
@@ -2690,7 +2748,6 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags)
fcport->loop_id = FC_NO_LOOP_ID;
qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED);
fcport->supported_classes = FC_COS_UNSPECIFIED;
- fcport->scan_state = QLA_FCPORT_SCAN_NONE;
return fcport;
}
@@ -3103,7 +3160,7 @@ static int
qla2x00_configure_fabric(scsi_qla_host_t *vha)
{
int rval;
- fc_port_t *fcport;
+ fc_port_t *fcport, *fcptemp;
uint16_t next_loopid;
uint16_t mb[MAILBOX_REGISTER_COUNT];
uint16_t loop_id;
@@ -3141,7 +3198,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
0xfc, mb, BIT_1|BIT_0);
if (rval != QLA_SUCCESS) {
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
- break;
+ return rval;
}
if (mb[0] != MBS_COMMAND_COMPLETE) {
ql_dbg(ql_dbg_disc, vha, 0x2042,
@@ -3173,16 +3230,21 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
}
}
+#define QLA_FCPORT_SCAN 1
+#define QLA_FCPORT_FOUND 2
+
+ list_for_each_entry(fcport, &vha->vp_fcports, list) {
+ fcport->scan_state = QLA_FCPORT_SCAN;
+ }
+
rval = qla2x00_find_all_fabric_devs(vha, &new_fcports);
if (rval != QLA_SUCCESS)
break;
- /* Add new ports to existing port list */
- list_splice_tail_init(&new_fcports, &vha->vp_fcports);
-
- /* Starting free loop ID. */
- next_loopid = ha->min_external_loopid;
-
+ /*
+ * Logout all previous fabric devices marked lost, except
+ * FCP2 devices.
+ */
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
break;
@@ -3190,8 +3252,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
if ((fcport->flags & FCF_FABRIC_DEVICE) == 0)
continue;
- /* Logout lost/gone fabric devices (non-FCP2) */
- if (fcport->scan_state != QLA_FCPORT_SCAN_FOUND &&
+ if (fcport->scan_state == QLA_FCPORT_SCAN &&
atomic_read(&fcport->state) == FCS_ONLINE) {
qla2x00_mark_device_lost(vha, fcport,
ql2xplogiabsentdevice, 0);
@@ -3204,30 +3265,74 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
fcport->d_id.b.domain,
fcport->d_id.b.area,
fcport->d_id.b.al_pa);
+ fcport->loop_id = FC_NO_LOOP_ID;
}
- continue;
}
- fcport->scan_state = QLA_FCPORT_SCAN_NONE;
-
- /* Login fabric devices that need a login */
- if ((fcport->flags & FCF_LOGIN_NEEDED) != 0 &&
- atomic_read(&vha->loop_down_timer) == 0) {
- if (fcport->loop_id == FC_NO_LOOP_ID) {
- fcport->loop_id = next_loopid;
- rval = qla2x00_find_new_loop_id(
- base_vha, fcport);
- if (rval != QLA_SUCCESS) {
- /* Ran out of IDs to use */
- continue;
- }
+ }
+
+ /* Starting free loop ID. */
+ next_loopid = ha->min_external_loopid;
+
+ /*
+ * Scan through our port list and login entries that need to be
+ * logged in.
+ */
+ list_for_each_entry(fcport, &vha->vp_fcports, list) {
+ if (atomic_read(&vha->loop_down_timer) ||
+ test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
+ break;
+
+ if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 ||
+ (fcport->flags & FCF_LOGIN_NEEDED) == 0)
+ continue;
+
+ if (fcport->loop_id == FC_NO_LOOP_ID) {
+ fcport->loop_id = next_loopid;
+ rval = qla2x00_find_new_loop_id(
+ base_vha, fcport);
+ if (rval != QLA_SUCCESS) {
+ /* Ran out of IDs to use */
+ break;
}
}
+ /* Login and update database */
+ qla2x00_fabric_dev_login(vha, fcport, &next_loopid);
+ }
+
+ /* Exit if out of loop IDs. */
+ if (rval != QLA_SUCCESS) {
+ break;
+ }
+
+ /*
+ * Login and add the new devices to our port list.
+ */
+ list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
+ if (atomic_read(&vha->loop_down_timer) ||
+ test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
+ break;
+
+ /* Find a new loop ID to use. */
+ fcport->loop_id = next_loopid;
+ rval = qla2x00_find_new_loop_id(base_vha, fcport);
+ if (rval != QLA_SUCCESS) {
+ /* Ran out of IDs to use */
+ break;
+ }
/* Login and update database */
qla2x00_fabric_dev_login(vha, fcport, &next_loopid);
+
+ list_move_tail(&fcport->list, &vha->vp_fcports);
}
} while (0);
+ /* Free all new device structures not processed. */
+ list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
+ list_del(&fcport->list);
+ kfree(fcport);
+ }
+
if (rval) {
ql_dbg(ql_dbg_disc, vha, 0x2068,
"Configure fabric error exit rval=%d.\n", rval);
@@ -3263,8 +3368,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
int first_dev, last_dev;
port_id_t wrap = {}, nxt_d_id;
struct qla_hw_data *ha = vha->hw;
- struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev);
- struct scsi_qla_host *tvp;
+ struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
rval = QLA_SUCCESS;
@@ -3377,22 +3481,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
continue;
/* Bypass virtual ports of the same host. */
- found = 0;
- if (ha->num_vhosts) {
- unsigned long flags;
-
- spin_lock_irqsave(&ha->vport_slock, flags);
- list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
- if (new_fcport->d_id.b24 == vp->d_id.b24) {
- found = 1;
- break;
- }
- }
- spin_unlock_irqrestore(&ha->vport_slock, flags);
-
- if (found)
- continue;
- }
+ if (qla2x00_is_a_vp_did(vha, new_fcport->d_id.b24))
+ continue;
/* Bypass if same domain and area of adapter. */
if (((new_fcport->d_id.b24 & 0xffff00) ==
@@ -3417,7 +3507,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
WWN_SIZE))
continue;
- fcport->scan_state = QLA_FCPORT_SCAN_FOUND;
+ fcport->scan_state = QLA_FCPORT_FOUND;
found++;
@@ -5004,7 +5094,7 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
return rval;
}
-#define QLA_FW_URL "ftp://ftp.qlogic.com/outgoing/linux/firmware/"
+#define QLA_FW_URL "http://ldriver.qlogic.com/firmware/"
int
qla2x00_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
@@ -5529,6 +5619,8 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
if (IS_T10_PI_CAPABLE(ha))
nv->frame_payload_size &= ~7;
+ qlt_81xx_config_nvram_stage1(vha, nv);
+
/* Reset Initialization control block */
memset(icb, 0, ha->init_cb_size);
@@ -5569,6 +5661,8 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name),
"QLE8XXX");
+ qlt_81xx_config_nvram_stage2(vha, icb);
+
/* Use alternate WWN? */
if (nv->host_p & __constant_cpu_to_le32(BIT_15)) {
memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index c0462c0..68e2c4a 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -198,6 +198,13 @@ done:
}
static inline void
+qla2x00_rel_sp(scsi_qla_host_t *vha, srb_t *sp)
+{
+ mempool_free(sp, vha->hw->srb_mempool);
+ QLA_VHA_MARK_NOT_BUSY(vha);
+}
+
+static inline void
qla2x00_init_timer(srb_t *sp, unsigned long tmo)
{
init_timer(&sp->u.iocb_cmd.timer);
@@ -213,3 +220,22 @@ qla2x00_gid_list_size(struct qla_hw_data *ha)
{
return sizeof(struct gid_list_info) * ha->max_fibre_devices;
}
+
+static inline void
+qla2x00_do_host_ramp_up(scsi_qla_host_t *vha)
+{
+ if (vha->hw->cfg_lun_q_depth >= ql2xmaxqdepth)
+ return;
+
+ /* Wait at least HOST_QUEUE_RAMPDOWN_INTERVAL before ramping up */
+ if (time_before(jiffies, (vha->hw->host_last_rampdown_time +
+ HOST_QUEUE_RAMPDOWN_INTERVAL)))
+ return;
+
+ /* Wait at least HOST_QUEUE_RAMPUP_INTERVAL between each ramp up */
+ if (time_before(jiffies, (vha->hw->host_last_rampup_time +
+ HOST_QUEUE_RAMPUP_INTERVAL)))
+ return;
+
+ set_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags);
+}
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index a481684..d263031 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -349,14 +349,14 @@ qla2x00_start_scsi(srb_t *sp)
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
- for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+ for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
- if (handle == MAX_OUTSTANDING_COMMANDS)
+ if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
- if (index == MAX_OUTSTANDING_COMMANDS)
+ if (index == req->num_outstanding_cmds)
goto queuing_error;
/* Map the sg table so we have an accurate count of sg entries needed */
@@ -1467,16 +1467,15 @@ qla24xx_start_scsi(srb_t *sp)
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
- for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+ for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
- if (handle == MAX_OUTSTANDING_COMMANDS)
+ if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
- if (index == MAX_OUTSTANDING_COMMANDS) {
+ if (index == req->num_outstanding_cmds)
goto queuing_error;
- }
/* Map the sg table so we have an accurate count of sg entries needed */
if (scsi_sg_count(cmd)) {
@@ -1641,15 +1640,15 @@ qla24xx_dif_start_scsi(srb_t *sp)
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
- for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+ for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
- if (handle == MAX_OUTSTANDING_COMMANDS)
+ if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
- if (index == MAX_OUTSTANDING_COMMANDS)
+ if (index == req->num_outstanding_cmds)
goto queuing_error;
/* Compute number of required data segments */
@@ -1822,14 +1821,14 @@ qla2x00_alloc_iocbs(scsi_qla_host_t *vha, srb_t *sp)
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
- for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+ for (index = 1; req->num_outstanding_cmds; index++) {
handle++;
- if (handle == MAX_OUTSTANDING_COMMANDS)
+ if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
- if (index == MAX_OUTSTANDING_COMMANDS) {
+ if (index == req->num_outstanding_cmds) {
ql_log(ql_log_warn, vha, 0x700b,
"No room on outstanding cmd array.\n");
goto queuing_error;
@@ -2263,14 +2262,14 @@ qla82xx_start_scsi(srb_t *sp)
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
- for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+ for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
- if (handle == MAX_OUTSTANDING_COMMANDS)
+ if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
- if (index == MAX_OUTSTANDING_COMMANDS)
+ if (index == req->num_outstanding_cmds)
goto queuing_error;
/* Map the sg table so we have an accurate count of sg entries needed */
@@ -2767,15 +2766,15 @@ qla2x00_start_bidir(srb_t *sp, struct scsi_qla_host *vha, uint32_t tot_dsds)
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
- for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+ for (index = 1; index < req->num_outstanding_cmds; index++) {
handle++;
- if (handle == MAX_OUTSTANDING_COMMANDS)
+ if (handle == req->num_outstanding_cmds)
handle = 1;
if (!req->outstanding_cmds[handle])
break;
}
- if (index == MAX_OUTSTANDING_COMMANDS) {
+ if (index == req->num_outstanding_cmds) {
rval = EXT_STATUS_BUSY;
goto queuing_error;
}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 873c820..e9dbd74 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -13,6 +13,8 @@
#include <scsi/scsi_bsg_fc.h>
#include <scsi/scsi_eh.h>
+#include "qla_target.h"
+
static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t);
static void qla2x00_process_completed_request(struct scsi_qla_host *,
struct req_que *, uint32_t);
@@ -489,10 +491,37 @@ qla83xx_handle_8200_aen(scsi_qla_host_t *vha, uint16_t *mb)
if (mb[1] & IDC_DEVICE_STATE_CHANGE) {
ql_log(ql_log_info, vha, 0x506a,
"IDC Device-State changed = 0x%x.\n", mb[4]);
+ if (ha->flags.nic_core_reset_owner)
+ return;
qla83xx_schedule_work(vha, MBA_IDC_AEN);
}
}
+int
+qla2x00_is_a_vp_did(scsi_qla_host_t *vha, uint32_t rscn_entry)
+{
+ struct qla_hw_data *ha = vha->hw;
+ scsi_qla_host_t *vp;
+ uint32_t vp_did;
+ unsigned long flags;
+ int ret = 0;
+
+ if (!ha->num_vhosts)
+ return ret;
+
+ spin_lock_irqsave(&ha->vport_slock, flags);
+ list_for_each_entry(vp, &ha->vp_list, list) {
+ vp_did = vp->d_id.b24;
+ if (vp_did == rscn_entry) {
+ ret = 1;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&ha->vport_slock, flags);
+
+ return ret;
+}
+
/**
* qla2x00_async_event() - Process aynchronous events.
* @ha: SCSI driver HA context
@@ -899,6 +928,10 @@ skip_rio:
/* Ignore reserved bits from RSCN-payload. */
rscn_entry = ((mb[1] & 0x3ff) << 16) | mb[2];
+ /* Skip RSCNs for virtual ports on the same physical port */
+ if (qla2x00_is_a_vp_did(vha, rscn_entry))
+ break;
+
atomic_set(&vha->loop_down_timer, 0);
vha->flags.management_server_logged_in = 0;
@@ -983,14 +1016,25 @@ skip_rio:
mb[1], mb[2], mb[3]);
break;
case MBA_IDC_NOTIFY:
- /* See if we need to quiesce any I/O */
- if (IS_QLA8031(vha->hw))
- if ((mb[2] & 0x7fff) == MBC_PORT_RESET ||
- (mb[2] & 0x7fff) == MBC_SET_PORT_CONFIG) {
+ if (IS_QLA8031(vha->hw)) {
+ mb[4] = RD_REG_WORD(®24->mailbox4);
+ if (((mb[2] & 0x7fff) == MBC_PORT_RESET ||
+ (mb[2] & 0x7fff) == MBC_SET_PORT_CONFIG) &&
+ (mb[4] & INTERNAL_LOOPBACK_MASK) != 0) {
set_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags);
+ /*
+ * Extend loop down timer since port is active.
+ */
+ if (atomic_read(&vha->loop_state) == LOOP_DOWN)
+ atomic_set(&vha->loop_down_timer,
+ LOOP_DOWN_TIME);
qla2xxx_wake_dpc(vha);
}
+ }
case MBA_IDC_COMPLETE:
+ if (ha->notify_lb_portup_comp)
+ complete(&ha->lb_portup_comp);
+ /* Fallthru */
case MBA_IDC_TIME_EXT:
if (IS_QLA81XX(vha->hw) || IS_QLA8031(vha->hw))
qla81xx_idc_event(vha, mb[0], mb[1]);
@@ -1029,7 +1073,7 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
struct qla_hw_data *ha = vha->hw;
/* Validate handle. */
- if (index >= MAX_OUTSTANDING_COMMANDS) {
+ if (index >= req->num_outstanding_cmds) {
ql_log(ql_log_warn, vha, 0x3014,
"Invalid SCSI command index (%x).\n", index);
@@ -1067,7 +1111,7 @@ qla2x00_get_sp_from_handle(scsi_qla_host_t *vha, const char *func,
uint16_t index;
index = LSW(pkt->handle);
- if (index >= MAX_OUTSTANDING_COMMANDS) {
+ if (index >= req->num_outstanding_cmds) {
ql_log(ql_log_warn, vha, 0x5031,
"Invalid command index (%x).\n", index);
if (IS_QLA82XX(ha))
@@ -1740,7 +1784,7 @@ qla25xx_process_bidir_status_iocb(scsi_qla_host_t *vha, void *pkt,
sts24 = (struct sts_entry_24xx *) pkt;
/* Validate handle. */
- if (index >= MAX_OUTSTANDING_COMMANDS) {
+ if (index >= req->num_outstanding_cmds) {
ql_log(ql_log_warn, vha, 0x70af,
"Invalid SCSI completion handle 0x%x.\n", index);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
@@ -1910,9 +1954,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
req = ha->req_q_map[que];
/* Validate handle. */
- if (handle < MAX_OUTSTANDING_COMMANDS) {
+ if (handle < req->num_outstanding_cmds)
sp = req->outstanding_cmds[handle];
- } else
+ else
sp = NULL;
if (sp == NULL) {
@@ -1934,6 +1978,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
/* Fast path completion. */
if (comp_status == CS_COMPLETE && scsi_status == 0) {
+ qla2x00_do_host_ramp_up(vha);
qla2x00_process_completed_request(vha, req, handle);
return;
@@ -2193,6 +2238,9 @@ out:
cp->cmnd[8], cp->cmnd[9], scsi_bufflen(cp), rsp_info_len,
resid_len, fw_resid_len);
+ if (!res)
+ qla2x00_do_host_ramp_up(vha);
+
if (rsp->status_srb == NULL)
sp->done(ha, sp, res);
}
@@ -2747,6 +2795,12 @@ static struct qla_init_msix_entry qla82xx_msix_entries[2] = {
{ "qla2xxx (rsp_q)", qla82xx_msix_rsp_q },
};
+static struct qla_init_msix_entry qla83xx_msix_entries[3] = {
+ { "qla2xxx (default)", qla24xx_msix_default },
+ { "qla2xxx (rsp_q)", qla24xx_msix_rsp_q },
+ { "qla2xxx (atio_q)", qla83xx_msix_atio_q },
+};
+
static void
qla24xx_disable_msix(struct qla_hw_data *ha)
{
@@ -2827,9 +2881,13 @@ msix_failed:
}
/* Enable MSI-X vectors for the base queue */
- for (i = 0; i < 2; i++) {
+ for (i = 0; i < ha->msix_count; i++) {
qentry = &ha->msix_entries[i];
- if (IS_QLA82XX(ha)) {
+ if (QLA_TGT_MODE_ENABLED() && IS_ATIO_MSIX_CAPABLE(ha)) {
+ ret = request_irq(qentry->vector,
+ qla83xx_msix_entries[i].handler,
+ 0, qla83xx_msix_entries[i].name, rsp);
+ } else if (IS_QLA82XX(ha)) {
ret = request_irq(qentry->vector,
qla82xx_msix_entries[i].handler,
0, qla82xx_msix_entries[i].name, rsp);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 68c55ea..186dd59 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -900,13 +900,13 @@ qla2x00_abort_command(srb_t *sp)
"Entered %s.\n", __func__);
spin_lock_irqsave(&ha->hardware_lock, flags);
- for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
+ for (handle = 1; handle < req->num_outstanding_cmds; handle++) {
if (req->outstanding_cmds[handle] == sp)
break;
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- if (handle == MAX_OUTSTANDING_COMMANDS) {
+ if (handle == req->num_outstanding_cmds) {
/* command not found */
return QLA_FUNCTION_FAILED;
}
@@ -1633,6 +1633,54 @@ qla2x00_get_port_name(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t *name,
}
/*
+ * qla24xx_link_initialization
+ * Issue link initialization mailbox command.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * TARGET_QUEUE_LOCK must be released.
+ * ADAPTER_STATE_LOCK must be released.
+ *
+ * Returns:
+ * qla2x00 local function return status code.
+ *
+ * Context:
+ * Kernel context.
+ */
+int
+qla24xx_link_initialize(scsi_qla_host_t *vha)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1152,
+ "Entered %s.\n", __func__);
+
+ if (!IS_FWI2_CAPABLE(vha->hw) || IS_CNA_CAPABLE(vha->hw))
+ return QLA_FUNCTION_FAILED;
+
+ mcp->mb[0] = MBC_LINK_INITIALIZATION;
+ mcp->mb[1] = BIT_6|BIT_4;
+ mcp->mb[2] = 0;
+ mcp->mb[3] = 0;
+ mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1153, "Failed=%x.\n", rval);
+ } else {
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1154,
+ "Done %s.\n", __func__);
+ }
+
+ return rval;
+}
+
+/*
* qla2x00_lip_reset
* Issue LIP reset mailbox command.
*
@@ -2535,12 +2583,12 @@ qla24xx_abort_command(srb_t *sp)
"Entered %s.\n", __func__);
spin_lock_irqsave(&ha->hardware_lock, flags);
- for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
+ for (handle = 1; handle < req->num_outstanding_cmds; handle++) {
if (req->outstanding_cmds[handle] == sp)
break;
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- if (handle == MAX_OUTSTANDING_COMMANDS) {
+ if (handle == req->num_outstanding_cmds) {
/* Command not found. */
return QLA_FUNCTION_FAILED;
}
@@ -3093,6 +3141,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
struct qla_hw_data *ha = vha->hw;
scsi_qla_host_t *vp;
unsigned long flags;
+ int found;
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10b6,
"Entered %s.\n", __func__);
@@ -3128,13 +3177,17 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
return;
}
+ found = 0;
spin_lock_irqsave(&ha->vport_slock, flags);
- list_for_each_entry(vp, &ha->vp_list, list)
- if (vp_idx == vp->vp_idx)
+ list_for_each_entry(vp, &ha->vp_list, list) {
+ if (vp_idx == vp->vp_idx) {
+ found = 1;
break;
+ }
+ }
spin_unlock_irqrestore(&ha->vport_slock, flags);
- if (!vp)
+ if (!found)
return;
vp->d_id.b.domain = rptid_entry->port_id[2];
@@ -3814,6 +3867,97 @@ qla81xx_restart_mpi_firmware(scsi_qla_host_t *vha)
}
int
+qla2x00_set_driver_version(scsi_qla_host_t *vha, char *version)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ int len;
+ uint16_t dwlen;
+ uint8_t *str;
+ dma_addr_t str_dma;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_FWI2_CAPABLE(ha) || IS_QLA82XX(ha))
+ return QLA_FUNCTION_FAILED;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1155,
+ "Entered %s.\n", __func__);
+
+ str = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &str_dma);
+ if (!str) {
+ ql_log(ql_log_warn, vha, 0x1156,
+ "Failed to allocate driver version param.\n");
+ return QLA_MEMORY_ALLOC_FAILED;
+ }
+
+ memcpy(str, "\x7\x3\x11\x0", 4);
+ dwlen = str[0];
+ len = dwlen * sizeof(uint32_t) - 4;
+ memset(str + 4, 0, len);
+ if (len > strlen(version))
+ len = strlen(version);
+ memcpy(str + 4, version, len);
+
+ mcp->mb[0] = MBC_SET_RNID_PARAMS;
+ mcp->mb[1] = RNID_TYPE_SET_VERSION << 8 | dwlen;
+ mcp->mb[2] = MSW(LSD(str_dma));
+ mcp->mb[3] = LSW(LSD(str_dma));
+ mcp->mb[6] = MSW(MSD(str_dma));
+ mcp->mb[7] = LSW(MSD(str_dma));
+ mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1157,
+ "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
+ } else {
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1158,
+ "Done %s.\n", __func__);
+ }
+
+ dma_pool_free(ha->s_dma_pool, str, str_dma);
+
+ return rval;
+}
+
+static int
+qla2x00_read_asic_temperature(scsi_qla_host_t *vha, uint16_t *temp)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ if (!IS_FWI2_CAPABLE(vha->hw))
+ return QLA_FUNCTION_FAILED;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1159,
+ "Entered %s.\n", __func__);
+
+ mcp->mb[0] = MBC_GET_RNID_PARAMS;
+ mcp->mb[1] = RNID_TYPE_ASIC_TEMP << 8;
+ mcp->out_mb = MBX_1|MBX_0;
+ mcp->in_mb = MBX_1|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+ *temp = mcp->mb[1];
+
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x115a,
+ "Failed=%x mb[0]=%x,%x.\n", rval, mcp->mb[0], mcp->mb[1]);
+ } else {
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x115b,
+ "Done %s.\n", __func__);
+ }
+
+ return rval;
+}
+
+int
qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
uint16_t dev, uint16_t off, uint16_t len, uint16_t opt)
{
@@ -4415,38 +4559,45 @@ qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority,
}
int
-qla2x00_get_thermal_temp(scsi_qla_host_t *vha, uint16_t *temp, uint16_t *frac)
+qla2x00_get_thermal_temp(scsi_qla_host_t *vha, uint16_t *temp)
{
- int rval;
- uint8_t byte;
+ int rval = QLA_FUNCTION_FAILED;
struct qla_hw_data *ha = vha->hw;
+ uint8_t byte;
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10ca,
"Entered %s.\n", __func__);
- /* Integer part */
- rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x01, 1,
- BIT_13|BIT_12|BIT_0);
- if (rval != QLA_SUCCESS) {
- ql_dbg(ql_dbg_mbx, vha, 0x10c9, "Failed=%x.\n", rval);
- ha->flags.thermal_supported = 0;
- goto fail;
+ if (ha->thermal_support & THERMAL_SUPPORT_I2C) {
+ rval = qla2x00_read_sfp(vha, 0, &byte,
+ 0x98, 0x1, 1, BIT_13|BIT_12|BIT_0);
+ *temp = byte;
+ if (rval == QLA_SUCCESS)
+ goto done;
+
+ ql_log(ql_log_warn, vha, 0x10c9,
+ "Thermal not supported by I2C.\n");
+ ha->thermal_support &= ~THERMAL_SUPPORT_I2C;
}
- *temp = byte;
- /* Fraction part */
- rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x10, 1,
- BIT_13|BIT_12|BIT_0);
- if (rval != QLA_SUCCESS) {
- ql_dbg(ql_dbg_mbx, vha, 0x1019, "Failed=%x.\n", rval);
- ha->flags.thermal_supported = 0;
- goto fail;
+ if (ha->thermal_support & THERMAL_SUPPORT_ISP) {
+ rval = qla2x00_read_asic_temperature(vha, temp);
+ if (rval == QLA_SUCCESS)
+ goto done;
+
+ ql_log(ql_log_warn, vha, 0x1019,
+ "Thermal not supported by ISP.\n");
+ ha->thermal_support &= ~THERMAL_SUPPORT_ISP;
}
- *frac = (byte >> 6) * 25;
+ ql_log(ql_log_warn, vha, 0x1150,
+ "Thermal not supported by this card "
+ "(ignoring further requests).\n");
+ return rval;
+
+done:
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1018,
"Done %s.\n", __func__);
-fail:
return rval;
}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 20fd974..f868a9f 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -523,6 +523,7 @@ qla25xx_free_req_que(struct scsi_qla_host *vha, struct req_que *req)
clear_bit(que_id, ha->req_qid_map);
mutex_unlock(&ha->vport_lock);
}
+ kfree(req->outstanding_cmds);
kfree(req);
req = NULL;
}
@@ -649,6 +650,10 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
goto que_failed;
}
+ ret = qla2x00_alloc_outstanding_cmds(ha, req);
+ if (ret != QLA_SUCCESS)
+ goto que_failed;
+
mutex_lock(&ha->vport_lock);
que_id = find_first_zero_bit(ha->req_qid_map, ha->max_req_queues);
if (que_id >= ha->max_req_queues) {
@@ -685,7 +690,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
"options=0x%x.\n", req->options);
ql_dbg(ql_dbg_init, base_vha, 0x00dd,
"options=0x%x.\n", req->options);
- for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+ for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++)
req->outstanding_cmds[cnt] = NULL;
req->current_outstanding_cmd = 1;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 3e3f593..10754f51 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -847,14 +847,21 @@ static int
qla82xx_rom_lock(struct qla_hw_data *ha)
{
int done = 0, timeout = 0;
+ uint32_t lock_owner = 0;
+ scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
while (!done) {
/* acquire semaphore2 from PCI HW block */
done = qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_LOCK));
if (done == 1)
break;
- if (timeout >= qla82xx_rom_lock_timeout)
+ if (timeout >= qla82xx_rom_lock_timeout) {
+ lock_owner = qla82xx_rd_32(ha, QLA82XX_ROM_LOCK_ID);
+ ql_dbg(ql_dbg_p3p, vha, 0xb085,
+ "Failed to acquire rom lock, acquired by %d.\n",
+ lock_owner);
return -1;
+ }
timeout++;
}
qla82xx_wr_32(ha, QLA82XX_ROM_LOCK_ID, ROM_LOCK_DRIVER);
@@ -3629,7 +3636,7 @@ qla82xx_chip_reset_cleanup(scsi_qla_host_t *vha)
req = ha->req_q_map[que];
if (!req)
continue;
- for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+ for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) {
sp = req->outstanding_cmds[cnt];
if (sp) {
if (!sp->u.scmd.ctx ||
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index 6c953e8..d268e84 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -897,7 +897,7 @@ struct ct6_dsd {
#define FLT_REG_BOOT_CODE_82XX 0x78
#define FLT_REG_FW_82XX 0x74
#define FLT_REG_GOLD_FW_82XX 0x75
-#define FLT_REG_VPD_82XX 0x81
+#define FLT_REG_VPD_8XXX 0x81
#define FA_VPD_SIZE_82XX 0x400
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 10d23f8..2c6dd3d 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -111,8 +111,7 @@ MODULE_PARM_DESC(ql2xfdmienable,
"Enables FDMI registrations. "
"0 - no FDMI. Default is 1 - perform FDMI.");
-#define MAX_Q_DEPTH 32
-static int ql2xmaxqdepth = MAX_Q_DEPTH;
+int ql2xmaxqdepth = MAX_Q_DEPTH;
module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xmaxqdepth,
"Maximum queue depth to set for each LUN. "
@@ -360,6 +359,9 @@ static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req)
(req->length + 1) * sizeof(request_t),
req->ring, req->dma);
+ if (req)
+ kfree(req->outstanding_cmds);
+
kfree(req);
req = NULL;
}
@@ -628,7 +630,7 @@ qla2x00_sp_free_dma(void *vha, void *ptr)
}
CMD_SP(cmd) = NULL;
- mempool_free(sp, ha->srb_mempool);
+ qla2x00_rel_sp(sp->fcport->vha, sp);
}
static void
@@ -716,9 +718,11 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
goto qc24_target_busy;
}
- sp = qla2x00_get_sp(base_vha, fcport, GFP_ATOMIC);
- if (!sp)
+ sp = qla2x00_get_sp(vha, fcport, GFP_ATOMIC);
+ if (!sp) {
+ set_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags);
goto qc24_host_busy;
+ }
sp->u.scmd.cmd = cmd;
sp->type = SRB_SCSI_CMD;
@@ -731,6 +735,7 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3013,
"Start scsi failed rval=%d for cmd=%p.\n", rval, cmd);
+ set_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags);
goto qc24_host_busy_free_sp;
}
@@ -1010,7 +1015,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t,
spin_lock_irqsave(&ha->hardware_lock, flags);
req = vha->req;
for (cnt = 1; status == QLA_SUCCESS &&
- cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+ cnt < req->num_outstanding_cmds; cnt++) {
sp = req->outstanding_cmds[cnt];
if (!sp)
continue;
@@ -1300,14 +1305,14 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
}
if (ha->flags.enable_lip_full_login && !IS_CNA_CAPABLE(ha)) {
+ atomic_set(&vha->loop_state, LOOP_DOWN);
+ atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
+ qla2x00_mark_all_devices_lost(vha, 0);
ret = qla2x00_full_login_lip(vha);
if (ret != QLA_SUCCESS) {
ql_dbg(ql_dbg_taskm, vha, 0x802d,
"full_login_lip=%d.\n", ret);
}
- atomic_set(&vha->loop_state, LOOP_DOWN);
- atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
- qla2x00_mark_all_devices_lost(vha, 0);
}
if (ha->flags.enable_lip_reset) {
@@ -1337,7 +1342,9 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
req = ha->req_q_map[que];
if (!req)
continue;
- for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+ if (!req->outstanding_cmds)
+ continue;
+ for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) {
sp = req->outstanding_cmds[cnt];
if (sp) {
req->outstanding_cmds[cnt] = NULL;
@@ -1453,6 +1460,81 @@ qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
return tag_type;
}
+static void
+qla2x00_host_ramp_down_queuedepth(scsi_qla_host_t *vha)
+{
+ scsi_qla_host_t *vp;
+ struct Scsi_Host *shost;
+ struct scsi_device *sdev;
+ struct qla_hw_data *ha = vha->hw;
+ unsigned long flags;
+
+ ha->host_last_rampdown_time = jiffies;
+
+ if (ha->cfg_lun_q_depth <= vha->host->cmd_per_lun)
+ return;
+
+ if ((ha->cfg_lun_q_depth / 2) < vha->host->cmd_per_lun)
+ ha->cfg_lun_q_depth = vha->host->cmd_per_lun;
+ else
+ ha->cfg_lun_q_depth = ha->cfg_lun_q_depth / 2;
+
+ /*
+ * Geometrically ramp down the queue depth for all devices on this
+ * adapter
+ */
+ spin_lock_irqsave(&ha->vport_slock, flags);
+ list_for_each_entry(vp, &ha->vp_list, list) {
+ shost = vp->host;
+ shost_for_each_device(sdev, shost) {
+ if (sdev->queue_depth > shost->cmd_per_lun) {
+ if (sdev->queue_depth < ha->cfg_lun_q_depth)
+ continue;
+ ql_log(ql_log_warn, vp, 0x3031,
+ "%ld:%d:%d: Ramping down queue depth to %d",
+ vp->host_no, sdev->id, sdev->lun,
+ ha->cfg_lun_q_depth);
+ qla2x00_change_queue_depth(sdev,
+ ha->cfg_lun_q_depth, SCSI_QDEPTH_DEFAULT);
+ }
+ }
+ }
+ spin_unlock_irqrestore(&ha->vport_slock, flags);
+
+ return;
+}
+
+static void
+qla2x00_host_ramp_up_queuedepth(scsi_qla_host_t *vha)
+{
+ scsi_qla_host_t *vp;
+ struct Scsi_Host *shost;
+ struct scsi_device *sdev;
+ struct qla_hw_data *ha = vha->hw;
+ unsigned long flags;
+
+ ha->host_last_rampup_time = jiffies;
+ ha->cfg_lun_q_depth++;
+
+ /*
+ * Linearly ramp up the queue depth for all devices on this
+ * adapter
+ */
+ spin_lock_irqsave(&ha->vport_slock, flags);
+ list_for_each_entry(vp, &ha->vp_list, list) {
+ shost = vp->host;
+ shost_for_each_device(sdev, shost) {
+ if (sdev->queue_depth > ha->cfg_lun_q_depth)
+ continue;
+ qla2x00_change_queue_depth(sdev, ha->cfg_lun_q_depth,
+ SCSI_QDEPTH_RAMP_UP);
+ }
+ }
+ spin_unlock_irqrestore(&ha->vport_slock, flags);
+
+ return;
+}
+
/**
* qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
* @ha: HA context
@@ -1730,6 +1812,9 @@ qla83xx_iospace_config(struct qla_hw_data *ha)
mqiobase_exit:
ha->msix_count = ha->max_rsp_queues + 1;
+
+ qlt_83xx_iospace_config(ha);
+
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x011f,
"MSIX Count:%d.\n", ha->msix_count);
return 0;
@@ -2230,6 +2315,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->init_cb_size = sizeof(init_cb_t);
ha->link_data_rate = PORT_SPEED_UNKNOWN;
ha->optrom_size = OPTROM_SIZE_2300;
+ ha->cfg_lun_q_depth = ql2xmaxqdepth;
/* Assign ISP specific operations. */
if (IS_QLA2100(ha)) {
@@ -2307,6 +2393,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->mbx_count = MAILBOX_REGISTER_COUNT;
req_length = REQUEST_ENTRY_CNT_24XX;
rsp_length = RESPONSE_ENTRY_CNT_2300;
+ ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX;
ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
ha->gid_list_info_size = 8;
@@ -2338,6 +2425,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->mbx_count = MAILBOX_REGISTER_COUNT;
req_length = REQUEST_ENTRY_CNT_24XX;
rsp_length = RESPONSE_ENTRY_CNT_2300;
+ ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX;
ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
ha->gid_list_info_size = 8;
@@ -2377,6 +2465,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
complete(&ha->mbx_cmd_comp);
init_completion(&ha->mbx_intr_comp);
init_completion(&ha->dcbx_comp);
+ init_completion(&ha->lb_portup_comp);
set_bit(0, (unsigned long *) ha->vp_idx_map);
@@ -2720,6 +2809,9 @@ qla2x00_shutdown(struct pci_dev *pdev)
scsi_qla_host_t *vha;
struct qla_hw_data *ha;
+ if (!atomic_read(&pdev->enable_cnt))
+ return;
+
vha = pci_get_drvdata(pdev);
ha = vha->hw;
@@ -3974,6 +4066,8 @@ qla83xx_force_lock_recovery(scsi_qla_host_t *base_vha)
uint32_t idc_lck_rcvry_stage_mask = 0x3;
uint32_t idc_lck_rcvry_owner_mask = 0x3c;
struct qla_hw_data *ha = base_vha->hw;
+ ql_dbg(ql_dbg_p3p, base_vha, 0xb086,
+ "Trying force recovery of the IDC lock.\n");
rval = qla83xx_rd_reg(base_vha, QLA83XX_IDC_LOCK_RECOVERY, &data);
if (rval)
@@ -4065,6 +4159,7 @@ qla83xx_idc_lock(scsi_qla_host_t *base_vha, uint16_t requester_id)
{
uint16_t options = (requester_id << 15) | BIT_6;
uint32_t data;
+ uint32_t lock_owner;
struct qla_hw_data *ha = base_vha->hw;
/* IDC-lock implementation using driver-lock/lock-id remote registers */
@@ -4076,8 +4171,11 @@ retry_lock:
qla83xx_wr_reg(base_vha, QLA83XX_DRIVER_LOCKID,
ha->portnum);
} else {
+ qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCKID,
+ &lock_owner);
ql_dbg(ql_dbg_p3p, base_vha, 0xb063,
- "Failed to acquire IDC lock. retrying...\n");
+ "Failed to acquire IDC lock, acquired by %d, "
+ "retrying...\n", lock_owner);
/* Retry/Perform IDC-Lock recovery */
if (qla83xx_idc_lock_recovery(base_vha)
@@ -4605,6 +4703,18 @@ qla2x00_do_dpc(void *data)
qla2xxx_flash_npiv_conf(base_vha);
}
+ if (test_and_clear_bit(HOST_RAMP_DOWN_QUEUE_DEPTH,
+ &base_vha->dpc_flags)) {
+ /* Prevents simultaneous ramp up and down */
+ clear_bit(HOST_RAMP_UP_QUEUE_DEPTH,
+ &base_vha->dpc_flags);
+ qla2x00_host_ramp_down_queuedepth(base_vha);
+ }
+
+ if (test_and_clear_bit(HOST_RAMP_UP_QUEUE_DEPTH,
+ &base_vha->dpc_flags))
+ qla2x00_host_ramp_up_queuedepth(base_vha);
+
if (!ha->interrupts_on)
ha->isp_ops->enable_intrs(ha);
@@ -4733,7 +4843,7 @@ qla2x00_timer(scsi_qla_host_t *vha)
cpu_flags);
req = ha->req_q_map[0];
for (index = 1;
- index < MAX_OUTSTANDING_COMMANDS;
+ index < req->num_outstanding_cmds;
index++) {
fc_port_t *sfcp;
@@ -4802,7 +4912,9 @@ qla2x00_timer(scsi_qla_host_t *vha)
test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags) ||
test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) ||
test_bit(VP_DPC_NEEDED, &vha->dpc_flags) ||
- test_bit(RELOGIN_NEEDED, &vha->dpc_flags))) {
+ test_bit(RELOGIN_NEEDED, &vha->dpc_flags) ||
+ test_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags) ||
+ test_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags))) {
ql_dbg(ql_dbg_timer, vha, 0x600b,
"isp_abort_needed=%d loop_resync_needed=%d "
"fcport_update_needed=%d start_dpc=%d "
@@ -4815,12 +4927,15 @@ qla2x00_timer(scsi_qla_host_t *vha)
ql_dbg(ql_dbg_timer, vha, 0x600c,
"beacon_blink_needed=%d isp_unrecoverable=%d "
"fcoe_ctx_reset_needed=%d vp_dpc_needed=%d "
- "relogin_needed=%d.\n",
+ "relogin_needed=%d, host_ramp_down_needed=%d "
+ "host_ramp_up_needed=%d.\n",
test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags),
test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags),
test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags),
test_bit(VP_DPC_NEEDED, &vha->dpc_flags),
- test_bit(RELOGIN_NEEDED, &vha->dpc_flags));
+ test_bit(RELOGIN_NEEDED, &vha->dpc_flags),
+ test_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags),
+ test_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags));
qla2xxx_wake_dpc(vha);
}
diff --git a/drivers/scsi/qla2xxx/qla_settings.h b/drivers/scsi/qla2xxx/qla_settings.h
index 892a81e..46ef0ac 100644
--- a/drivers/scsi/qla2xxx/qla_settings.h
+++ b/drivers/scsi/qla2xxx/qla_settings.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 32fdc2a..3bef673 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -798,20 +798,8 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
case FLT_REG_BOOTLOAD_82XX:
ha->flt_region_bootload = start;
break;
- case FLT_REG_VPD_82XX:
- ha->flt_region_vpd = start;
- break;
- case FLT_REG_FCOE_VPD_0:
- if (!IS_QLA8031(ha))
- break;
- ha->flt_region_vpd_nvram = start;
- if (ha->flags.port0)
- ha->flt_region_vpd = start;
- break;
- case FLT_REG_FCOE_VPD_1:
- if (!IS_QLA8031(ha))
- break;
- if (!ha->flags.port0)
+ case FLT_REG_VPD_8XXX:
+ if (IS_CNA_CAPABLE(ha))
ha->flt_region_vpd = start;
break;
case FLT_REG_FCOE_NVRAM_0:
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 80f4b84..61b5d8c 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -52,7 +52,7 @@ MODULE_PARM_DESC(qlini_mode,
"\"disabled\" - initiator mode will never be enabled; "
"\"enabled\" (default) - initiator mode will always stay enabled.");
-static int ql2x_ini_mode = QLA2XXX_INI_MODE_EXCLUSIVE;
+int ql2x_ini_mode = QLA2XXX_INI_MODE_EXCLUSIVE;
/*
* From scsi/fc/fc_fcp.h
@@ -1119,6 +1119,7 @@ static void qlt_send_notify_ack(struct scsi_qla_host *vha,
nack->u.isp24.srr_rx_id = ntfy->u.isp24.srr_rx_id;
nack->u.isp24.status = ntfy->u.isp24.status;
nack->u.isp24.status_subcode = ntfy->u.isp24.status_subcode;
+ nack->u.isp24.fw_handle = ntfy->u.isp24.fw_handle;
nack->u.isp24.exchange_address = ntfy->u.isp24.exchange_address;
nack->u.isp24.srr_rel_offs = ntfy->u.isp24.srr_rel_offs;
nack->u.isp24.srr_ui = ntfy->u.isp24.srr_ui;
@@ -1570,7 +1571,7 @@ static inline uint32_t qlt_make_handle(struct scsi_qla_host *vha)
/* always increment cmd handle */
do {
++h;
- if (h > MAX_OUTSTANDING_COMMANDS)
+ if (h > DEFAULT_OUTSTANDING_COMMANDS)
h = 1; /* 0 is QLA_TGT_NULL_HANDLE */
if (h == ha->tgt.current_handle) {
ql_dbg(ql_dbg_tgt, vha, 0xe04e,
@@ -2441,7 +2442,7 @@ static struct qla_tgt_cmd *qlt_ctio_to_cmd(struct scsi_qla_host *vha,
return NULL;
}
/* handle-1 is actually used */
- if (unlikely(handle > MAX_OUTSTANDING_COMMANDS)) {
+ if (unlikely(handle > DEFAULT_OUTSTANDING_COMMANDS)) {
ql_dbg(ql_dbg_tgt, vha, 0xe052,
"qla_target(%d): Wrong handle %x received\n",
vha->vp_idx, handle);
@@ -4305,6 +4306,12 @@ int qlt_add_target(struct qla_hw_data *ha, struct scsi_qla_host *base_vha)
if (!QLA_TGT_MODE_ENABLED())
return 0;
+ if (!IS_TGT_MODE_CAPABLE(ha)) {
+ ql_log(ql_log_warn, base_vha, 0xe070,
+ "This adapter does not support target mode.\n");
+ return 0;
+ }
+
ql_dbg(ql_dbg_tgt, base_vha, 0xe03b,
"Registering target for host %ld(%p)", base_vha->host_no, ha);
@@ -4666,7 +4673,6 @@ void
qlt_24xx_process_atio_queue(struct scsi_qla_host *vha)
{
struct qla_hw_data *ha = vha->hw;
- struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
struct atio_from_isp *pkt;
int cnt, i;
@@ -4694,26 +4700,28 @@ qlt_24xx_process_atio_queue(struct scsi_qla_host *vha)
}
/* Adjust ring index */
- WRT_REG_DWORD(®->atio_q_out, ha->tgt.atio_ring_index);
+ WRT_REG_DWORD(ISP_ATIO_Q_OUT(vha), ha->tgt.atio_ring_index);
}
void
-qlt_24xx_config_rings(struct scsi_qla_host *vha, device_reg_t __iomem *reg)
+qlt_24xx_config_rings(struct scsi_qla_host *vha)
{
struct qla_hw_data *ha = vha->hw;
+ if (!QLA_TGT_MODE_ENABLED())
+ return;
-/* FIXME: atio_q in/out for ha->mqenable=1..? */
- if (ha->mqenable) {
-#if 0
- WRT_REG_DWORD(®->isp25mq.atio_q_in, 0);
- WRT_REG_DWORD(®->isp25mq.atio_q_out, 0);
- RD_REG_DWORD(®->isp25mq.atio_q_out);
-#endif
- } else {
- /* Setup APTIO registers for target mode */
- WRT_REG_DWORD(®->isp24.atio_q_in, 0);
- WRT_REG_DWORD(®->isp24.atio_q_out, 0);
- RD_REG_DWORD(®->isp24.atio_q_out);
+ WRT_REG_DWORD(ISP_ATIO_Q_IN(vha), 0);
+ WRT_REG_DWORD(ISP_ATIO_Q_OUT(vha), 0);
+ RD_REG_DWORD(ISP_ATIO_Q_OUT(vha));
+
+ if (IS_ATIO_MSIX_CAPABLE(ha)) {
+ struct qla_msix_entry *msix = &ha->msix_entries[2];
+ struct init_cb_24xx *icb = (struct init_cb_24xx *)ha->init_cb;
+
+ icb->msix_atio = cpu_to_le16(msix->entry);
+ ql_dbg(ql_dbg_init, vha, 0xf072,
+ "Registering ICB vector 0x%x for atio que.\n",
+ msix->entry);
}
}
@@ -4796,6 +4804,101 @@ qlt_24xx_config_nvram_stage2(struct scsi_qla_host *vha,
}
}
+void
+qlt_81xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_81xx *nv)
+{
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!QLA_TGT_MODE_ENABLED())
+ return;
+
+ if (qla_tgt_mode_enabled(vha)) {
+ if (!ha->tgt.saved_set) {
+ /* We save only once */
+ ha->tgt.saved_exchange_count = nv->exchange_count;
+ ha->tgt.saved_firmware_options_1 =
+ nv->firmware_options_1;
+ ha->tgt.saved_firmware_options_2 =
+ nv->firmware_options_2;
+ ha->tgt.saved_firmware_options_3 =
+ nv->firmware_options_3;
+ ha->tgt.saved_set = 1;
+ }
+
+ nv->exchange_count = __constant_cpu_to_le16(0xFFFF);
+
+ /* Enable target mode */
+ nv->firmware_options_1 |= __constant_cpu_to_le32(BIT_4);
+
+ /* Disable ini mode, if requested */
+ if (!qla_ini_mode_enabled(vha))
+ nv->firmware_options_1 |=
+ __constant_cpu_to_le32(BIT_5);
+
+ /* Disable Full Login after LIP */
+ nv->firmware_options_1 &= __constant_cpu_to_le32(~BIT_13);
+ /* Enable initial LIP */
+ nv->firmware_options_1 &= __constant_cpu_to_le32(~BIT_9);
+ /* Enable FC tapes support */
+ nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
+ /* Disable Full Login after LIP */
+ nv->host_p &= __constant_cpu_to_le32(~BIT_10);
+ /* Enable target PRLI control */
+ nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_14);
+ } else {
+ if (ha->tgt.saved_set) {
+ nv->exchange_count = ha->tgt.saved_exchange_count;
+ nv->firmware_options_1 =
+ ha->tgt.saved_firmware_options_1;
+ nv->firmware_options_2 =
+ ha->tgt.saved_firmware_options_2;
+ nv->firmware_options_3 =
+ ha->tgt.saved_firmware_options_3;
+ }
+ return;
+ }
+
+ /* out-of-order frames reassembly */
+ nv->firmware_options_3 |= BIT_6|BIT_9;
+
+ if (ha->tgt.enable_class_2) {
+ if (vha->flags.init_done)
+ fc_host_supported_classes(vha->host) =
+ FC_COS_CLASS2 | FC_COS_CLASS3;
+
+ nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_8);
+ } else {
+ if (vha->flags.init_done)
+ fc_host_supported_classes(vha->host) = FC_COS_CLASS3;
+
+ nv->firmware_options_2 &= ~__constant_cpu_to_le32(BIT_8);
+ }
+}
+
+void
+qlt_81xx_config_nvram_stage2(struct scsi_qla_host *vha,
+ struct init_cb_81xx *icb)
+{
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!QLA_TGT_MODE_ENABLED())
+ return;
+
+ if (ha->tgt.node_name_set) {
+ memcpy(icb->node_name, ha->tgt.tgt_node_name, WWN_SIZE);
+ icb->firmware_options_1 |= __constant_cpu_to_le32(BIT_14);
+ }
+}
+
+void
+qlt_83xx_iospace_config(struct qla_hw_data *ha)
+{
+ if (!QLA_TGT_MODE_ENABLED())
+ return;
+
+ ha->msix_count += 1; /* For ATIO Q */
+}
+
int
qlt_24xx_process_response_error(struct scsi_qla_host *vha,
struct sts_entry_24xx *pkt)
@@ -4828,11 +4931,41 @@ qlt_probe_one_stage1(struct scsi_qla_host *base_vha, struct qla_hw_data *ha)
if (!QLA_TGT_MODE_ENABLED())
return;
+ if (ha->mqenable || IS_QLA83XX(ha)) {
+ ISP_ATIO_Q_IN(base_vha) = &ha->mqiobase->isp25mq.atio_q_in;
+ ISP_ATIO_Q_OUT(base_vha) = &ha->mqiobase->isp25mq.atio_q_out;
+ } else {
+ ISP_ATIO_Q_IN(base_vha) = &ha->iobase->isp24.atio_q_in;
+ ISP_ATIO_Q_OUT(base_vha) = &ha->iobase->isp24.atio_q_out;
+ }
+
mutex_init(&ha->tgt.tgt_mutex);
mutex_init(&ha->tgt.tgt_host_action_mutex);
qlt_clear_mode(base_vha);
}
+irqreturn_t
+qla83xx_msix_atio_q(int irq, void *dev_id)
+{
+ struct rsp_que *rsp;
+ scsi_qla_host_t *vha;
+ struct qla_hw_data *ha;
+ unsigned long flags;
+
+ rsp = (struct rsp_que *) dev_id;
+ ha = rsp->hw;
+ vha = pci_get_drvdata(ha->pdev);
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+
+ qlt_24xx_process_atio_queue(vha);
+ qla24xx_process_response_queue(vha, rsp);
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
int
qlt_mem_alloc(struct qla_hw_data *ha)
{
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index bad7495..ff9ccb9 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -60,8 +60,9 @@
* multi-complete should come to the tgt driver or be handled there by qla2xxx
*/
#define CTIO_COMPLETION_HANDLE_MARK BIT_29
-#if (CTIO_COMPLETION_HANDLE_MARK <= MAX_OUTSTANDING_COMMANDS)
-#error "CTIO_COMPLETION_HANDLE_MARK not larger than MAX_OUTSTANDING_COMMANDS"
+#if (CTIO_COMPLETION_HANDLE_MARK <= DEFAULT_OUTSTANDING_COMMANDS)
+#error "CTIO_COMPLETION_HANDLE_MARK not larger than "
+ "DEFAULT_OUTSTANDING_COMMANDS"
#endif
#define HANDLE_IS_CTIO_COMP(h) (h & CTIO_COMPLETION_HANDLE_MARK)
@@ -161,7 +162,7 @@ struct imm_ntfy_from_isp {
uint16_t srr_rx_id;
uint16_t status;
uint8_t status_subcode;
- uint8_t reserved_3;
+ uint8_t fw_handle;
uint32_t exchange_address;
uint32_t srr_rel_offs;
uint16_t srr_ui;
@@ -217,7 +218,7 @@ struct nack_to_isp {
uint16_t srr_rx_id;
uint16_t status;
uint8_t status_subcode;
- uint8_t reserved_3;
+ uint8_t fw_handle;
uint32_t exchange_address;
uint32_t srr_rel_offs;
uint16_t srr_ui;
@@ -948,6 +949,7 @@ extern void qlt_update_vp_map(struct scsi_qla_host *, int);
* is not set. Right now, ha value is ignored.
*/
#define QLA_TGT_MODE_ENABLED() (ql2x_ini_mode != QLA2XXX_INI_MODE_ENABLED)
+extern int ql2x_ini_mode;
static inline bool qla_tgt_mode_enabled(struct scsi_qla_host *ha)
{
@@ -985,12 +987,15 @@ extern void qlt_vport_create(struct scsi_qla_host *, struct qla_hw_data *);
extern void qlt_rff_id(struct scsi_qla_host *, struct ct_sns_req *);
extern void qlt_init_atio_q_entries(struct scsi_qla_host *);
extern void qlt_24xx_process_atio_queue(struct scsi_qla_host *);
-extern void qlt_24xx_config_rings(struct scsi_qla_host *,
- device_reg_t __iomem *);
+extern void qlt_24xx_config_rings(struct scsi_qla_host *);
extern void qlt_24xx_config_nvram_stage1(struct scsi_qla_host *,
struct nvram_24xx *);
extern void qlt_24xx_config_nvram_stage2(struct scsi_qla_host *,
struct init_cb_24xx *);
+extern void qlt_81xx_config_nvram_stage2(struct scsi_qla_host *,
+ struct init_cb_81xx *);
+extern void qlt_81xx_config_nvram_stage1(struct scsi_qla_host *,
+ struct nvram_81xx *);
extern int qlt_24xx_process_response_error(struct scsi_qla_host *,
struct sts_entry_24xx *);
extern void qlt_modify_vp_config(struct scsi_qla_host *,
@@ -1000,5 +1005,7 @@ extern int qlt_mem_alloc(struct qla_hw_data *);
extern void qlt_mem_free(struct qla_hw_data *);
extern void qlt_stop_phase1(struct qla_tgt *);
extern void qlt_stop_phase2(struct qla_tgt *);
+extern irqreturn_t qla83xx_msix_atio_q(int, void *);
+extern void qlt_83xx_iospace_config(struct qla_hw_data *);
#endif /* __QLA_TARGET_H */
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 49697ca..2b6e478 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2012 QLogic Corporation
+ * Copyright (c) 2003-2013 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 81e738d..160d336 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -1420,10 +1420,8 @@ int qla4xxx_get_chap(struct scsi_qla_host *ha, char *username, char *password,
dma_addr_t chap_dma;
chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
- if (chap_table == NULL) {
- ret = -ENOMEM;
- goto exit_get_chap;
- }
+ if (chap_table == NULL)
+ return -ENOMEM;
chap_size = sizeof(struct ql4_chap_table);
memset(chap_table, 0, chap_size);
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 0144078..5dd6c49 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -201,6 +201,7 @@ enum storvsc_request_type {
#define SRB_STATUS_AUTOSENSE_VALID 0x80
#define SRB_STATUS_INVALID_LUN 0x20
#define SRB_STATUS_SUCCESS 0x01
+#define SRB_STATUS_ABORTED 0x02
#define SRB_STATUS_ERROR 0x04
/*
@@ -295,6 +296,25 @@ struct storvsc_scan_work {
uint lun;
};
+static void storvsc_device_scan(struct work_struct *work)
+{
+ struct storvsc_scan_work *wrk;
+ uint lun;
+ struct scsi_device *sdev;
+
+ wrk = container_of(work, struct storvsc_scan_work, work);
+ lun = wrk->lun;
+
+ sdev = scsi_device_lookup(wrk->host, 0, 0, lun);
+ if (!sdev)
+ goto done;
+ scsi_rescan_device(&sdev->sdev_gendev);
+ scsi_device_put(sdev);
+
+done:
+ kfree(wrk);
+}
+
static void storvsc_bus_scan(struct work_struct *work)
{
struct storvsc_scan_work *wrk;
@@ -467,6 +487,7 @@ static struct scatterlist *create_bounce_buffer(struct scatterlist *sgl,
if (!bounce_sgl)
return NULL;
+ sg_init_table(bounce_sgl, num_pages);
for (i = 0; i < num_pages; i++) {
page_buf = alloc_page(GFP_ATOMIC);
if (!page_buf)
@@ -760,6 +781,66 @@ cleanup:
return ret;
}
+static void storvsc_handle_error(struct vmscsi_request *vm_srb,
+ struct scsi_cmnd *scmnd,
+ struct Scsi_Host *host,
+ u8 asc, u8 ascq)
+{
+ struct storvsc_scan_work *wrk;
+ void (*process_err_fn)(struct work_struct *work);
+ bool do_work = false;
+
+ switch (vm_srb->srb_status) {
+ case SRB_STATUS_ERROR:
+ /*
+ * If there is an error; offline the device since all
+ * error recovery strategies would have already been
+ * deployed on the host side. However, if the command
+ * were a pass-through command deal with it appropriately.
+ */
+ switch (scmnd->cmnd[0]) {
+ case ATA_16:
+ case ATA_12:
+ set_host_byte(scmnd, DID_PASSTHROUGH);
+ break;
+ default:
+ set_host_byte(scmnd, DID_TARGET_FAILURE);
+ }
+ break;
+ case SRB_STATUS_INVALID_LUN:
+ do_work = true;
+ process_err_fn = storvsc_remove_lun;
+ break;
+ case (SRB_STATUS_ABORTED | SRB_STATUS_AUTOSENSE_VALID):
+ if ((asc == 0x2a) && (ascq == 0x9)) {
+ do_work = true;
+ process_err_fn = storvsc_device_scan;
+ /*
+ * Retry the I/O that trigerred this.
+ */
+ set_host_byte(scmnd, DID_REQUEUE);
+ }
+ break;
+ }
+
+ if (!do_work)
+ return;
+
+ /*
+ * We need to schedule work to process this error; schedule it.
+ */
+ wrk = kmalloc(sizeof(struct storvsc_scan_work), GFP_ATOMIC);
+ if (!wrk) {
+ set_host_byte(scmnd, DID_TARGET_FAILURE);
+ return;
+ }
+
+ wrk->host = host;
+ wrk->lun = vm_srb->lun;
+ INIT_WORK(&wrk->work, process_err_fn);
+ schedule_work(&wrk->work);
+}
+
static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
{
@@ -768,8 +849,13 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
void (*scsi_done_fn)(struct scsi_cmnd *);
struct scsi_sense_hdr sense_hdr;
struct vmscsi_request *vm_srb;
- struct storvsc_scan_work *wrk;
struct stor_mem_pools *memp = scmnd->device->hostdata;
+ struct Scsi_Host *host;
+ struct storvsc_device *stor_dev;
+ struct hv_device *dev = host_dev->dev;
+
+ stor_dev = get_in_stor_device(dev);
+ host = stor_dev->host;
vm_srb = &cmd_request->vstor_packet.vm_srb;
if (cmd_request->bounce_sgl_count) {
@@ -782,55 +868,18 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
cmd_request->bounce_sgl_count);
}
- /*
- * If there is an error; offline the device since all
- * error recovery strategies would have already been
- * deployed on the host side. However, if the command
- * were a pass-through command deal with it appropriately.
- */
scmnd->result = vm_srb->scsi_status;
- if (vm_srb->srb_status == SRB_STATUS_ERROR) {
- switch (scmnd->cmnd[0]) {
- case ATA_16:
- case ATA_12:
- set_host_byte(scmnd, DID_PASSTHROUGH);
- break;
- default:
- set_host_byte(scmnd, DID_TARGET_FAILURE);
- }
- }
-
-
- /*
- * If the LUN is invalid; remove the device.
- */
- if (vm_srb->srb_status == SRB_STATUS_INVALID_LUN) {
- struct storvsc_device *stor_dev;
- struct hv_device *dev = host_dev->dev;
- struct Scsi_Host *host;
-
- stor_dev = get_in_stor_device(dev);
- host = stor_dev->host;
-
- wrk = kmalloc(sizeof(struct storvsc_scan_work),
- GFP_ATOMIC);
- if (!wrk) {
- scmnd->result = DID_TARGET_FAILURE << 16;
- } else {
- wrk->host = host;
- wrk->lun = vm_srb->lun;
- INIT_WORK(&wrk->work, storvsc_remove_lun);
- schedule_work(&wrk->work);
- }
- }
-
if (scmnd->result) {
if (scsi_normalize_sense(scmnd->sense_buffer,
SCSI_SENSE_BUFFERSIZE, &sense_hdr))
scsi_print_sense_hdr("storvsc", &sense_hdr);
}
+ if (vm_srb->srb_status != SRB_STATUS_SUCCESS)
+ storvsc_handle_error(vm_srb, scmnd, host, sense_hdr.asc,
+ sense_hdr.ascq);
+
scsi_set_resid(scmnd,
cmd_request->data_buffer.len -
vm_srb->data_transfer_length);
@@ -1155,6 +1204,8 @@ static int storvsc_device_configure(struct scsi_device *sdevice)
blk_queue_bounce_limit(sdevice->request_queue, BLK_BOUNCE_ANY);
+ sdevice->no_write_same = 1;
+
return 0;
}
@@ -1237,6 +1288,8 @@ static bool storvsc_scsi_cmd_ok(struct scsi_cmnd *scmnd)
u8 scsi_op = scmnd->cmnd[0];
switch (scsi_op) {
+ /* the host does not handle WRITE_SAME, log accident usage */
+ case WRITE_SAME:
/*
* smartd sends this command and the host does not handle
* this. So, don't send it.
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 8f27f9d..0371047 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -2,48 +2,58 @@
# Kernel configuration file for the UFS Host Controller
#
# This code is based on drivers/scsi/ufs/Kconfig
-# Copyright (C) 2011 Samsung Samsung India Software Operations
+# Copyright (C) 2011-2013 Samsung India Software Operations
+#
+# Authors:
+# Santosh Yaraganavi <santosh.sy@samsung.com>
+# Vinayak Holikatti <h.vinayak@samsung.com>
#
-# Santosh Yaraganavi <santosh.sy@samsung.com>
-# Vinayak Holikatti <h.vinayak@samsung.com>
-
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
-
+# See the COPYING file in the top-level directory or visit
+# <http://www.gnu.org/licenses/gpl-2.0.html>
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
+#
+# This program is provided "AS IS" and "WITH ALL FAULTS" and
+# without warranty of any kind. You are solely responsible for
+# determining the appropriateness of using and distributing
+# the program and assume all risks associated with your exercise
+# of rights with respect to the program, including but not limited
+# to infringement of third party rights, the risks and costs of
+# program errors, damage to or loss of data, programs or equipment,
+# and unavailability or interruption of operations. Under no
+# circumstances will the contributor of this Program be liable for
+# any damages of any kind arising from your use or distribution of
+# this program.
-# NO WARRANTY
-# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-# solely responsible for determining the appropriateness of using and
-# distributing the Program and assumes all risks associated with its
-# exercise of rights under this Agreement, including but not limited to
-# the risks and costs of program errors, damage to or loss of data,
-# programs or equipment, and unavailability or interruption of operations.
-
-# DISCLAIMER OF LIABILITY
-# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+config SCSI_UFSHCD
+ tristate "Universal Flash Storage Controller Driver Core"
+ depends on SCSI
+ ---help---
+ This selects the support for UFS devices in Linux, say Y and make
+ sure that you know the name of your UFS host adapter (the card
+ inside your computer that "speaks" the UFS protocol, also
+ called UFS Host Controller), because you will be asked for it.
+ The module will be called ufshcd.
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-# USA.
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/ufs.txt>.
+ However, do not compile this as a module if your root file system
+ (the one containing the directory /) is located on a UFS device.
-config SCSI_UFSHCD
- tristate "Universal Flash Storage host controller driver"
- depends on PCI && SCSI
+config SCSI_UFSHCD_PCI
+ tristate "PCI bus based UFS Controller support"
+ depends on SCSI_UFSHCD && PCI
---help---
- This is a generic driver which supports PCIe UFS Host controllers.
+ This selects the PCI UFS Host Controller Interface. Select this if
+ you have UFS Host Controller with PCI Interface.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index adf7895..9eda0df 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,2 +1,3 @@
# UFSHCD makefile
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
+obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index b207529..139bc06 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -2,45 +2,35 @@
* Universal Flash Storage Host controller driver
*
* This code is based on drivers/scsi/ufs/ufs.h
- * Copyright (C) 2011-2012 Samsung India Software Operations
+ * Copyright (C) 2011-2013 Samsung India Software Operations
*
- * Santosh Yaraganavi <santosh.sy@samsung.com>
- * Vinayak Holikatti <h.vinayak@samsung.com>
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA.
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
*/
#ifndef _UFS_H
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
new file mode 100644
index 0000000..5cb1d75
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -0,0 +1,211 @@
+/*
+ * Universal Flash Storage Host controller PCI glue driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshcd-pci.c
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
+ */
+
+#include "ufshcd.h"
+#include <linux/pci.h>
+
+#ifdef CONFIG_PM
+/**
+ * ufshcd_pci_suspend - suspend power management function
+ * @pdev: pointer to PCI device handle
+ * @state: power state
+ *
+ * Returns -ENOSYS
+ */
+static int ufshcd_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ /*
+ * TODO:
+ * 1. Call ufshcd_suspend
+ * 2. Do bus specific power management
+ */
+
+ return -ENOSYS;
+}
+
+/**
+ * ufshcd_pci_resume - resume power management function
+ * @pdev: pointer to PCI device handle
+ *
+ * Returns -ENOSYS
+ */
+static int ufshcd_pci_resume(struct pci_dev *pdev)
+{
+ /*
+ * TODO:
+ * 1. Call ufshcd_resume.
+ * 2. Do bus specific wake up
+ */
+
+ return -ENOSYS;
+}
+#endif /* CONFIG_PM */
+
+/**
+ * ufshcd_pci_shutdown - main function to put the controller in reset state
+ * @pdev: pointer to PCI device handle
+ */
+static void ufshcd_pci_shutdown(struct pci_dev *pdev)
+{
+ ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev));
+}
+
+/**
+ * ufshcd_pci_remove - de-allocate PCI/SCSI host and host memory space
+ * data structure memory
+ * @pdev - pointer to PCI handle
+ */
+static void ufshcd_pci_remove(struct pci_dev *pdev)
+{
+ struct ufs_hba *hba = pci_get_drvdata(pdev);
+
+ disable_irq(pdev->irq);
+ free_irq(pdev->irq, hba);
+ ufshcd_remove(hba);
+ pci_release_regions(pdev);
+ pci_set_drvdata(pdev, NULL);
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+}
+
+/**
+ * ufshcd_set_dma_mask - Set dma mask based on the controller
+ * addressing capability
+ * @pdev: PCI device structure
+ *
+ * Returns 0 for success, non-zero for failure
+ */
+static int ufshcd_set_dma_mask(struct pci_dev *pdev)
+{
+ int err;
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+ && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
+ return 0;
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (!err)
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ return err;
+}
+
+/**
+ * ufshcd_pci_probe - probe routine of the driver
+ * @pdev: pointer to PCI device handle
+ * @id: PCI device id
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int
+ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct ufs_hba *hba;
+ void __iomem *mmio_base;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pci_enable_device failed\n");
+ goto out_error;
+ }
+
+ pci_set_master(pdev);
+
+
+ err = pci_request_regions(pdev, UFSHCD);
+ if (err < 0) {
+ dev_err(&pdev->dev, "request regions failed\n");
+ goto out_disable;
+ }
+
+ mmio_base = pci_ioremap_bar(pdev, 0);
+ if (!mmio_base) {
+ dev_err(&pdev->dev, "memory map failed\n");
+ err = -ENOMEM;
+ goto out_release_regions;
+ }
+
+ err = ufshcd_set_dma_mask(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "set dma mask failed\n");
+ goto out_iounmap;
+ }
+
+ err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq);
+ if (err) {
+ dev_err(&pdev->dev, "Initialization failed\n");
+ goto out_iounmap;
+ }
+
+ pci_set_drvdata(pdev, hba);
+
+ return 0;
+
+out_iounmap:
+ iounmap(mmio_base);
+out_release_regions:
+ pci_release_regions(pdev);
+out_disable:
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+out_error:
+ return err;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = {
+ { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { } /* terminate list */
+};
+
+MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl);
+
+static struct pci_driver ufshcd_pci_driver = {
+ .name = UFSHCD,
+ .id_table = ufshcd_pci_tbl,
+ .probe = ufshcd_pci_probe,
+ .remove = ufshcd_pci_remove,
+ .shutdown = ufshcd_pci_shutdown,
+#ifdef CONFIG_PM
+ .suspend = ufshcd_pci_suspend,
+ .resume = ufshcd_pci_resume,
+#endif
+};
+
+module_pci_driver(ufshcd_pci_driver);
+
+MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
+MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
+MODULE_DESCRIPTION("UFS host controller PCI glue driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(UFSHCD_DRIVER_VERSION);
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 91a4046..60fd40c 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1,77 +1,39 @@
/*
- * Universal Flash Storage Host controller driver
+ * Universal Flash Storage Host controller driver Core
*
* This code is based on drivers/scsi/ufs/ufshcd.c
- * Copyright (C) 2011-2012 Samsung India Software Operations
+ * Copyright (C) 2011-2013 Samsung India Software Operations
*
- * Santosh Yaraganavi <santosh.sy@samsung.com>
- * Vinayak Holikatti <h.vinayak@samsung.com>
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA.
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
*/
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <linux/bitops.h>
-
-#include <asm/irq.h>
-#include <asm/byteorder.h>
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_eh.h>
-
-#include "ufs.h"
-#include "ufshci.h"
-
-#define UFSHCD "ufshcd"
-#define UFSHCD_DRIVER_VERSION "0.1"
+#include "ufshcd.h"
enum {
UFSHCD_MAX_CHANNEL = 0,
@@ -102,121 +64,6 @@ enum {
};
/**
- * struct uic_command - UIC command structure
- * @command: UIC command
- * @argument1: UIC command argument 1
- * @argument2: UIC command argument 2
- * @argument3: UIC command argument 3
- * @cmd_active: Indicate if UIC command is outstanding
- * @result: UIC command result
- */
-struct uic_command {
- u32 command;
- u32 argument1;
- u32 argument2;
- u32 argument3;
- int cmd_active;
- int result;
-};
-
-/**
- * struct ufs_hba - per adapter private structure
- * @mmio_base: UFSHCI base register address
- * @ucdl_base_addr: UFS Command Descriptor base address
- * @utrdl_base_addr: UTP Transfer Request Descriptor base address
- * @utmrdl_base_addr: UTP Task Management Descriptor base address
- * @ucdl_dma_addr: UFS Command Descriptor DMA address
- * @utrdl_dma_addr: UTRDL DMA address
- * @utmrdl_dma_addr: UTMRDL DMA address
- * @host: Scsi_Host instance of the driver
- * @pdev: PCI device handle
- * @lrb: local reference block
- * @outstanding_tasks: Bits representing outstanding task requests
- * @outstanding_reqs: Bits representing outstanding transfer requests
- * @capabilities: UFS Controller Capabilities
- * @nutrs: Transfer Request Queue depth supported by controller
- * @nutmrs: Task Management Queue depth supported by controller
- * @active_uic_cmd: handle of active UIC command
- * @ufshcd_tm_wait_queue: wait queue for task management
- * @tm_condition: condition variable for task management
- * @ufshcd_state: UFSHCD states
- * @int_enable_mask: Interrupt Mask Bits
- * @uic_workq: Work queue for UIC completion handling
- * @feh_workq: Work queue for fatal controller error handling
- * @errors: HBA errors
- */
-struct ufs_hba {
- void __iomem *mmio_base;
-
- /* Virtual memory reference */
- struct utp_transfer_cmd_desc *ucdl_base_addr;
- struct utp_transfer_req_desc *utrdl_base_addr;
- struct utp_task_req_desc *utmrdl_base_addr;
-
- /* DMA memory reference */
- dma_addr_t ucdl_dma_addr;
- dma_addr_t utrdl_dma_addr;
- dma_addr_t utmrdl_dma_addr;
-
- struct Scsi_Host *host;
- struct pci_dev *pdev;
-
- struct ufshcd_lrb *lrb;
-
- unsigned long outstanding_tasks;
- unsigned long outstanding_reqs;
-
- u32 capabilities;
- int nutrs;
- int nutmrs;
- u32 ufs_version;
-
- struct uic_command active_uic_cmd;
- wait_queue_head_t ufshcd_tm_wait_queue;
- unsigned long tm_condition;
-
- u32 ufshcd_state;
- u32 int_enable_mask;
-
- /* Work Queues */
- struct work_struct uic_workq;
- struct work_struct feh_workq;
-
- /* HBA Errors */
- u32 errors;
-};
-
-/**
- * struct ufshcd_lrb - local reference block
- * @utr_descriptor_ptr: UTRD address of the command
- * @ucd_cmd_ptr: UCD address of the command
- * @ucd_rsp_ptr: Response UPIU address for this command
- * @ucd_prdt_ptr: PRDT address of the command
- * @cmd: pointer to SCSI command
- * @sense_buffer: pointer to sense buffer address of the SCSI command
- * @sense_bufflen: Length of the sense buffer
- * @scsi_status: SCSI status of the command
- * @command_type: SCSI, UFS, Query.
- * @task_tag: Task tag of the command
- * @lun: LUN of the command
- */
-struct ufshcd_lrb {
- struct utp_transfer_req_desc *utr_descriptor_ptr;
- struct utp_upiu_cmd *ucd_cmd_ptr;
- struct utp_upiu_rsp *ucd_rsp_ptr;
- struct ufshcd_sg_entry *ucd_prdt_ptr;
-
- struct scsi_cmnd *cmd;
- u8 *sense_buffer;
- unsigned int sense_bufflen;
- int scsi_status;
-
- int command_type;
- int task_tag;
- unsigned int lun;
-};
-
-/**
* ufshcd_get_ufs_version - Get the UFS version supported by the HBA
* @hba - Pointer to adapter instance
*
@@ -335,21 +182,21 @@ static inline void ufshcd_free_hba_memory(struct ufs_hba *hba)
if (hba->utmrdl_base_addr) {
utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs;
- dma_free_coherent(&hba->pdev->dev, utmrdl_size,
+ dma_free_coherent(hba->dev, utmrdl_size,
hba->utmrdl_base_addr, hba->utmrdl_dma_addr);
}
if (hba->utrdl_base_addr) {
utrdl_size =
(sizeof(struct utp_transfer_req_desc) * hba->nutrs);
- dma_free_coherent(&hba->pdev->dev, utrdl_size,
+ dma_free_coherent(hba->dev, utrdl_size,
hba->utrdl_base_addr, hba->utrdl_dma_addr);
}
if (hba->ucdl_base_addr) {
ucdl_size =
(sizeof(struct utp_transfer_cmd_desc) * hba->nutrs);
- dma_free_coherent(&hba->pdev->dev, ucdl_size,
+ dma_free_coherent(hba->dev, ucdl_size,
hba->ucdl_base_addr, hba->ucdl_dma_addr);
}
}
@@ -429,15 +276,6 @@ static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba)
}
/**
- * ufshcd_hba_stop - Send controller to reset state
- * @hba: per adapter instance
- */
-static inline void ufshcd_hba_stop(struct ufs_hba *hba)
-{
- writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE));
-}
-
-/**
* ufshcd_hba_start - Start controller initialization sequence
* @hba: per adapter instance
*/
@@ -724,7 +562,7 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba)
/* Allocate memory for UTP command descriptors */
ucdl_size = (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs);
- hba->ucdl_base_addr = dma_alloc_coherent(&hba->pdev->dev,
+ hba->ucdl_base_addr = dma_alloc_coherent(hba->dev,
ucdl_size,
&hba->ucdl_dma_addr,
GFP_KERNEL);
@@ -737,7 +575,7 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba)
*/
if (!hba->ucdl_base_addr ||
WARN_ON(hba->ucdl_dma_addr & (PAGE_SIZE - 1))) {
- dev_err(&hba->pdev->dev,
+ dev_err(hba->dev,
"Command Descriptor Memory allocation failed\n");
goto out;
}
@@ -747,13 +585,13 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba)
* UFSHCI requires 1024 byte alignment of UTRD
*/
utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs);
- hba->utrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev,
+ hba->utrdl_base_addr = dma_alloc_coherent(hba->dev,
utrdl_size,
&hba->utrdl_dma_addr,
GFP_KERNEL);
if (!hba->utrdl_base_addr ||
WARN_ON(hba->utrdl_dma_addr & (PAGE_SIZE - 1))) {
- dev_err(&hba->pdev->dev,
+ dev_err(hba->dev,
"Transfer Descriptor Memory allocation failed\n");
goto out;
}
@@ -763,13 +601,13 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba)
* UFSHCI requires 1024 byte alignment of UTMRD
*/
utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs;
- hba->utmrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev,
+ hba->utmrdl_base_addr = dma_alloc_coherent(hba->dev,
utmrdl_size,
&hba->utmrdl_dma_addr,
GFP_KERNEL);
if (!hba->utmrdl_base_addr ||
WARN_ON(hba->utmrdl_dma_addr & (PAGE_SIZE - 1))) {
- dev_err(&hba->pdev->dev,
+ dev_err(hba->dev,
"Task Management Descriptor Memory allocation failed\n");
goto out;
}
@@ -777,7 +615,7 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba)
/* Allocate memory for local reference block */
hba->lrb = kcalloc(hba->nutrs, sizeof(struct ufshcd_lrb), GFP_KERNEL);
if (!hba->lrb) {
- dev_err(&hba->pdev->dev, "LRB Memory allocation failed\n");
+ dev_err(hba->dev, "LRB Memory allocation failed\n");
goto out;
}
return 0;
@@ -867,7 +705,7 @@ static int ufshcd_dme_link_startup(struct ufs_hba *hba)
/* check if controller is ready to accept UIC commands */
if (((readl(hba->mmio_base + REG_CONTROLLER_STATUS)) &
UIC_COMMAND_READY) == 0x0) {
- dev_err(&hba->pdev->dev,
+ dev_err(hba->dev,
"Controller not ready"
" to accept UIC commands\n");
return -EIO;
@@ -912,7 +750,7 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
/* check if device present */
reg = readl((hba->mmio_base + REG_CONTROLLER_STATUS));
if (!ufshcd_is_device_present(reg)) {
- dev_err(&hba->pdev->dev, "cc: Device not present\n");
+ dev_err(hba->dev, "cc: Device not present\n");
err = -ENXIO;
goto out;
}
@@ -924,7 +762,7 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
if (!(ufshcd_get_lists_status(reg))) {
ufshcd_enable_run_stop_reg(hba);
} else {
- dev_err(&hba->pdev->dev,
+ dev_err(hba->dev,
"Host controller not ready to process requests");
err = -EIO;
goto out;
@@ -1005,7 +843,7 @@ static int ufshcd_hba_enable(struct ufs_hba *hba)
if (retry) {
retry--;
} else {
- dev_err(&hba->pdev->dev,
+ dev_err(hba->dev,
"Controller enable failed\n");
return -EIO;
}
@@ -1084,7 +922,7 @@ static int ufshcd_do_reset(struct ufs_hba *hba)
/* start the initialization process */
if (ufshcd_initialize_hba(hba)) {
- dev_err(&hba->pdev->dev,
+ dev_err(hba->dev,
"Reset: Controller initialization failed\n");
return FAILED;
}
@@ -1167,7 +1005,7 @@ static int ufshcd_task_req_compl(struct ufs_hba *hba, u32 index)
task_result = SUCCESS;
} else {
task_result = FAILED;
- dev_err(&hba->pdev->dev,
+ dev_err(hba->dev,
"trc: Invalid ocs = %x\n", ocs_value);
}
spin_unlock_irqrestore(hba->host->host_lock, flags);
@@ -1281,7 +1119,7 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
/* check if the returned transfer response is valid */
result = ufshcd_is_valid_req_rsp(lrbp->ucd_rsp_ptr);
if (result) {
- dev_err(&hba->pdev->dev,
+ dev_err(hba->dev,
"Invalid response = %x\n", result);
break;
}
@@ -1310,7 +1148,7 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
case OCS_FATAL_ERROR:
default:
result |= DID_ERROR << 16;
- dev_err(&hba->pdev->dev,
+ dev_err(hba->dev,
"OCS error from controller = %x\n", ocs);
break;
} /* end of switch */
@@ -1374,7 +1212,7 @@ static void ufshcd_uic_cc_handler (struct work_struct *work)
!(ufshcd_get_uic_cmd_result(hba))) {
if (ufshcd_make_hba_operational(hba))
- dev_err(&hba->pdev->dev,
+ dev_err(hba->dev,
"cc: hba not operational state\n");
return;
}
@@ -1509,7 +1347,7 @@ ufshcd_issue_tm_cmd(struct ufs_hba *hba,
free_slot = ufshcd_get_tm_free_slot(hba);
if (free_slot >= hba->nutmrs) {
spin_unlock_irqrestore(host->host_lock, flags);
- dev_err(&hba->pdev->dev, "Task management queue full\n");
+ dev_err(hba->dev, "Task management queue full\n");
err = FAILED;
goto out;
}
@@ -1552,7 +1390,7 @@ ufshcd_issue_tm_cmd(struct ufs_hba *hba,
&hba->tm_condition) != 0),
60 * HZ);
if (!err) {
- dev_err(&hba->pdev->dev,
+ dev_err(hba->dev,
"Task management command timed-out\n");
err = FAILED;
goto out;
@@ -1688,23 +1526,13 @@ static struct scsi_host_template ufshcd_driver_template = {
};
/**
- * ufshcd_shutdown - main function to put the controller in reset state
- * @pdev: pointer to PCI device handle
- */
-static void ufshcd_shutdown(struct pci_dev *pdev)
-{
- ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev));
-}
-
-#ifdef CONFIG_PM
-/**
* ufshcd_suspend - suspend power management function
- * @pdev: pointer to PCI device handle
+ * @hba: per adapter instance
* @state: power state
*
* Returns -ENOSYS
*/
-static int ufshcd_suspend(struct pci_dev *pdev, pm_message_t state)
+int ufshcd_suspend(struct ufs_hba *hba, pm_message_t state)
{
/*
* TODO:
@@ -1717,14 +1545,15 @@ static int ufshcd_suspend(struct pci_dev *pdev, pm_message_t state)
return -ENOSYS;
}
+EXPORT_SYMBOL_GPL(ufshcd_suspend);
/**
* ufshcd_resume - resume power management function
- * @pdev: pointer to PCI device handle
+ * @hba: per adapter instance
*
* Returns -ENOSYS
*/
-static int ufshcd_resume(struct pci_dev *pdev)
+int ufshcd_resume(struct ufs_hba *hba)
{
/*
* TODO:
@@ -1737,7 +1566,7 @@ static int ufshcd_resume(struct pci_dev *pdev)
return -ENOSYS;
}
-#endif /* CONFIG_PM */
+EXPORT_SYMBOL_GPL(ufshcd_resume);
/**
* ufshcd_hba_free - free allocated memory for
@@ -1748,107 +1577,67 @@ static void ufshcd_hba_free(struct ufs_hba *hba)
{
iounmap(hba->mmio_base);
ufshcd_free_hba_memory(hba);
- pci_release_regions(hba->pdev);
}
/**
- * ufshcd_remove - de-allocate PCI/SCSI host and host memory space
+ * ufshcd_remove - de-allocate SCSI host and host memory space
* data structure memory
- * @pdev - pointer to PCI handle
+ * @hba - per adapter instance
*/
-static void ufshcd_remove(struct pci_dev *pdev)
+void ufshcd_remove(struct ufs_hba *hba)
{
- struct ufs_hba *hba = pci_get_drvdata(pdev);
-
/* disable interrupts */
ufshcd_int_config(hba, UFSHCD_INT_DISABLE);
- free_irq(pdev->irq, hba);
ufshcd_hba_stop(hba);
ufshcd_hba_free(hba);
scsi_remove_host(hba->host);
scsi_host_put(hba->host);
- pci_set_drvdata(pdev, NULL);
- pci_clear_master(pdev);
- pci_disable_device(pdev);
-}
-
-/**
- * ufshcd_set_dma_mask - Set dma mask based on the controller
- * addressing capability
- * @pdev: PCI device structure
- *
- * Returns 0 for success, non-zero for failure
- */
-static int ufshcd_set_dma_mask(struct ufs_hba *hba)
-{
- int err;
- u64 dma_mask;
-
- /*
- * If controller supports 64 bit addressing mode, then set the DMA
- * mask to 64-bit, else set the DMA mask to 32-bit
- */
- if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT)
- dma_mask = DMA_BIT_MASK(64);
- else
- dma_mask = DMA_BIT_MASK(32);
-
- err = pci_set_dma_mask(hba->pdev, dma_mask);
- if (err)
- return err;
-
- err = pci_set_consistent_dma_mask(hba->pdev, dma_mask);
-
- return err;
}
+EXPORT_SYMBOL_GPL(ufshcd_remove);
/**
- * ufshcd_probe - probe routine of the driver
- * @pdev: pointer to PCI device handle
- * @id: PCI device id
- *
+ * ufshcd_init - Driver initialization routine
+ * @dev: pointer to device handle
+ * @hba_handle: driver private handle
+ * @mmio_base: base register address
+ * @irq: Interrupt line of device
* Returns 0 on success, non-zero value on failure
*/
-static int ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle,
+ void __iomem *mmio_base, unsigned int irq)
{
struct Scsi_Host *host;
struct ufs_hba *hba;
int err;
- err = pci_enable_device(pdev);
- if (err) {
- dev_err(&pdev->dev, "pci_enable_device failed\n");
+ if (!dev) {
+ dev_err(dev,
+ "Invalid memory reference for dev is NULL\n");
+ err = -ENODEV;
goto out_error;
}
- pci_set_master(pdev);
+ if (!mmio_base) {
+ dev_err(dev,
+ "Invalid memory reference for mmio_base is NULL\n");
+ err = -ENODEV;
+ goto out_error;
+ }
host = scsi_host_alloc(&ufshcd_driver_template,
sizeof(struct ufs_hba));
if (!host) {
- dev_err(&pdev->dev, "scsi_host_alloc failed\n");
+ dev_err(dev, "scsi_host_alloc failed\n");
err = -ENOMEM;
- goto out_disable;
+ goto out_error;
}
hba = shost_priv(host);
-
- err = pci_request_regions(pdev, UFSHCD);
- if (err < 0) {
- dev_err(&pdev->dev, "request regions failed\n");
- goto out_host_put;
- }
-
- hba->mmio_base = pci_ioremap_bar(pdev, 0);
- if (!hba->mmio_base) {
- dev_err(&pdev->dev, "memory map failed\n");
- err = -ENOMEM;
- goto out_release_regions;
- }
-
hba->host = host;
- hba->pdev = pdev;
+ hba->dev = dev;
+ hba->mmio_base = mmio_base;
+ hba->irq = irq;
/* Read capabilities registers */
ufshcd_hba_capabilities(hba);
@@ -1856,17 +1645,11 @@ static int ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id)
/* Get UFS version supported by the controller */
hba->ufs_version = ufshcd_get_ufs_version(hba);
- err = ufshcd_set_dma_mask(hba);
- if (err) {
- dev_err(&pdev->dev, "set dma mask failed\n");
- goto out_iounmap;
- }
-
/* Allocate memory for host memory space */
err = ufshcd_memory_alloc(hba);
if (err) {
- dev_err(&pdev->dev, "Memory allocation failed\n");
- goto out_iounmap;
+ dev_err(hba->dev, "Memory allocation failed\n");
+ goto out_disable;
}
/* Configure LRB */
@@ -1888,76 +1671,50 @@ static int ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id)
INIT_WORK(&hba->feh_workq, ufshcd_fatal_err_handler);
/* IRQ registration */
- err = request_irq(pdev->irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba);
+ err = request_irq(irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba);
if (err) {
- dev_err(&pdev->dev, "request irq failed\n");
+ dev_err(hba->dev, "request irq failed\n");
goto out_lrb_free;
}
/* Enable SCSI tag mapping */
err = scsi_init_shared_tag_map(host, host->can_queue);
if (err) {
- dev_err(&pdev->dev, "init shared queue failed\n");
+ dev_err(hba->dev, "init shared queue failed\n");
goto out_free_irq;
}
- pci_set_drvdata(pdev, hba);
-
- err = scsi_add_host(host, &pdev->dev);
+ err = scsi_add_host(host, hba->dev);
if (err) {
- dev_err(&pdev->dev, "scsi_add_host failed\n");
+ dev_err(hba->dev, "scsi_add_host failed\n");
goto out_free_irq;
}
/* Initialization routine */
err = ufshcd_initialize_hba(hba);
if (err) {
- dev_err(&pdev->dev, "Initialization failed\n");
- goto out_free_irq;
+ dev_err(hba->dev, "Initialization failed\n");
+ goto out_remove_scsi_host;
}
+ *hba_handle = hba;
return 0;
+out_remove_scsi_host:
+ scsi_remove_host(hba->host);
out_free_irq:
- free_irq(pdev->irq, hba);
+ free_irq(irq, hba);
out_lrb_free:
ufshcd_free_hba_memory(hba);
-out_iounmap:
- iounmap(hba->mmio_base);
-out_release_regions:
- pci_release_regions(pdev);
-out_host_put:
- scsi_host_put(host);
out_disable:
- pci_clear_master(pdev);
- pci_disable_device(pdev);
+ scsi_host_put(host);
out_error:
return err;
}
+EXPORT_SYMBOL_GPL(ufshcd_init);
-static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = {
- { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { } /* terminate list */
-};
-
-MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl);
-
-static struct pci_driver ufshcd_pci_driver = {
- .name = UFSHCD,
- .id_table = ufshcd_pci_tbl,
- .probe = ufshcd_probe,
- .remove = ufshcd_remove,
- .shutdown = ufshcd_shutdown,
-#ifdef CONFIG_PM
- .suspend = ufshcd_suspend,
- .resume = ufshcd_resume,
-#endif
-};
-
-module_pci_driver(ufshcd_pci_driver);
-
-MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>, "
- "Vinayak Holikatti <h.vinayak@samsung.com>");
-MODULE_DESCRIPTION("Generic UFS host controller driver");
+MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
+MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
+MODULE_DESCRIPTION("Generic UFS host controller driver Core");
MODULE_LICENSE("GPL");
MODULE_VERSION(UFSHCD_DRIVER_VERSION);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
new file mode 100644
index 0000000..6b99a42
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -0,0 +1,202 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshcd.h
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
+ */
+
+#ifndef _UFSHCD_H
+#define _UFSHCD_H
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/bitops.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
+
+#include "ufs.h"
+#include "ufshci.h"
+
+#define UFSHCD "ufshcd"
+#define UFSHCD_DRIVER_VERSION "0.2"
+
+/**
+ * struct uic_command - UIC command structure
+ * @command: UIC command
+ * @argument1: UIC command argument 1
+ * @argument2: UIC command argument 2
+ * @argument3: UIC command argument 3
+ * @cmd_active: Indicate if UIC command is outstanding
+ * @result: UIC command result
+ */
+struct uic_command {
+ u32 command;
+ u32 argument1;
+ u32 argument2;
+ u32 argument3;
+ int cmd_active;
+ int result;
+};
+
+/**
+ * struct ufshcd_lrb - local reference block
+ * @utr_descriptor_ptr: UTRD address of the command
+ * @ucd_cmd_ptr: UCD address of the command
+ * @ucd_rsp_ptr: Response UPIU address for this command
+ * @ucd_prdt_ptr: PRDT address of the command
+ * @cmd: pointer to SCSI command
+ * @sense_buffer: pointer to sense buffer address of the SCSI command
+ * @sense_bufflen: Length of the sense buffer
+ * @scsi_status: SCSI status of the command
+ * @command_type: SCSI, UFS, Query.
+ * @task_tag: Task tag of the command
+ * @lun: LUN of the command
+ */
+struct ufshcd_lrb {
+ struct utp_transfer_req_desc *utr_descriptor_ptr;
+ struct utp_upiu_cmd *ucd_cmd_ptr;
+ struct utp_upiu_rsp *ucd_rsp_ptr;
+ struct ufshcd_sg_entry *ucd_prdt_ptr;
+
+ struct scsi_cmnd *cmd;
+ u8 *sense_buffer;
+ unsigned int sense_bufflen;
+ int scsi_status;
+
+ int command_type;
+ int task_tag;
+ unsigned int lun;
+};
+
+
+/**
+ * struct ufs_hba - per adapter private structure
+ * @mmio_base: UFSHCI base register address
+ * @ucdl_base_addr: UFS Command Descriptor base address
+ * @utrdl_base_addr: UTP Transfer Request Descriptor base address
+ * @utmrdl_base_addr: UTP Task Management Descriptor base address
+ * @ucdl_dma_addr: UFS Command Descriptor DMA address
+ * @utrdl_dma_addr: UTRDL DMA address
+ * @utmrdl_dma_addr: UTMRDL DMA address
+ * @host: Scsi_Host instance of the driver
+ * @dev: device handle
+ * @lrb: local reference block
+ * @outstanding_tasks: Bits representing outstanding task requests
+ * @outstanding_reqs: Bits representing outstanding transfer requests
+ * @capabilities: UFS Controller Capabilities
+ * @nutrs: Transfer Request Queue depth supported by controller
+ * @nutmrs: Task Management Queue depth supported by controller
+ * @ufs_version: UFS Version to which controller complies
+ * @irq: Irq number of the controller
+ * @active_uic_cmd: handle of active UIC command
+ * @ufshcd_tm_wait_queue: wait queue for task management
+ * @tm_condition: condition variable for task management
+ * @ufshcd_state: UFSHCD states
+ * @int_enable_mask: Interrupt Mask Bits
+ * @uic_workq: Work queue for UIC completion handling
+ * @feh_workq: Work queue for fatal controller error handling
+ * @errors: HBA errors
+ */
+struct ufs_hba {
+ void __iomem *mmio_base;
+
+ /* Virtual memory reference */
+ struct utp_transfer_cmd_desc *ucdl_base_addr;
+ struct utp_transfer_req_desc *utrdl_base_addr;
+ struct utp_task_req_desc *utmrdl_base_addr;
+
+ /* DMA memory reference */
+ dma_addr_t ucdl_dma_addr;
+ dma_addr_t utrdl_dma_addr;
+ dma_addr_t utmrdl_dma_addr;
+
+ struct Scsi_Host *host;
+ struct device *dev;
+
+ struct ufshcd_lrb *lrb;
+
+ unsigned long outstanding_tasks;
+ unsigned long outstanding_reqs;
+
+ u32 capabilities;
+ int nutrs;
+ int nutmrs;
+ u32 ufs_version;
+ unsigned int irq;
+
+ struct uic_command active_uic_cmd;
+ wait_queue_head_t ufshcd_tm_wait_queue;
+ unsigned long tm_condition;
+
+ u32 ufshcd_state;
+ u32 int_enable_mask;
+
+ /* Work Queues */
+ struct work_struct uic_workq;
+ struct work_struct feh_workq;
+
+ /* HBA Errors */
+ u32 errors;
+};
+
+int ufshcd_init(struct device *, struct ufs_hba ** , void __iomem * ,
+ unsigned int);
+void ufshcd_remove(struct ufs_hba *);
+
+/**
+ * ufshcd_hba_stop - Send controller to reset state
+ * @hba: per adapter instance
+ */
+static inline void ufshcd_hba_stop(struct ufs_hba *hba)
+{
+ writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE));
+}
+
+#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index 6e3510f..0c16484 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -2,45 +2,35 @@
* Universal Flash Storage Host controller driver
*
* This code is based on drivers/scsi/ufs/ufshci.h
- * Copyright (C) 2011-2012 Samsung India Software Operations
+ * Copyright (C) 2011-2013 Samsung India Software Operations
*
- * Santosh Yaraganavi <santosh.sy@samsung.com>
- * Vinayak Holikatti <h.vinayak@samsung.com>
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA.
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
*/
#ifndef _UFSHCI_H
diff --git a/include/scsi/Kbuild b/include/scsi/Kbuild
index f2b9491..562ff9d 100644
--- a/include/scsi/Kbuild
+++ b/include/scsi/Kbuild
@@ -1,4 +1 @@
-header-y += scsi_netlink.h
-header-y += scsi_netlink_fc.h
-header-y += scsi_bsg_fc.h
header-y += fc/
diff --git a/include/scsi/fc/Kbuild b/include/scsi/fc/Kbuild
index 5660381..e69de29 100644
--- a/include/scsi/fc/Kbuild
+++ b/include/scsi/fc/Kbuild
@@ -1,4 +0,0 @@
-header-y += fc_els.h
-header-y += fc_fs.h
-header-y += fc_gs.h
-header-y += fc_ns.h
diff --git a/include/scsi/fc/fc_els.h b/include/scsi/fc/fc_els.h
deleted file mode 100644
index 481abbd..0000000
--- a/include/scsi/fc/fc_els.h
+++ /dev/null
@@ -1,831 +0,0 @@
-/*
- * Copyright(c) 2007 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Maintained at www.Open-FCoE.org
- */
-
-#ifndef _FC_ELS_H_
-#define _FC_ELS_H_
-
-#include <linux/types.h>
-
-/*
- * Fibre Channel Switch - Enhanced Link Services definitions.
- * From T11 FC-LS Rev 1.2 June 7, 2005.
- */
-
-/*
- * ELS Command codes - byte 0 of the frame payload
- */
-enum fc_els_cmd {
- ELS_LS_RJT = 0x01, /* ESL reject */
- ELS_LS_ACC = 0x02, /* ESL Accept */
- ELS_PLOGI = 0x03, /* N_Port login */
- ELS_FLOGI = 0x04, /* F_Port login */
- ELS_LOGO = 0x05, /* Logout */
- ELS_ABTX = 0x06, /* Abort exchange - obsolete */
- ELS_RCS = 0x07, /* read connection status */
- ELS_RES = 0x08, /* read exchange status block */
- ELS_RSS = 0x09, /* read sequence status block */
- ELS_RSI = 0x0a, /* read sequence initiative */
- ELS_ESTS = 0x0b, /* establish streaming */
- ELS_ESTC = 0x0c, /* estimate credit */
- ELS_ADVC = 0x0d, /* advise credit */
- ELS_RTV = 0x0e, /* read timeout value */
- ELS_RLS = 0x0f, /* read link error status block */
- ELS_ECHO = 0x10, /* echo */
- ELS_TEST = 0x11, /* test */
- ELS_RRQ = 0x12, /* reinstate recovery qualifier */
- ELS_REC = 0x13, /* read exchange concise */
- ELS_SRR = 0x14, /* sequence retransmission request */
- ELS_PRLI = 0x20, /* process login */
- ELS_PRLO = 0x21, /* process logout */
- ELS_SCN = 0x22, /* state change notification */
- ELS_TPLS = 0x23, /* test process login state */
- ELS_TPRLO = 0x24, /* third party process logout */
- ELS_LCLM = 0x25, /* login control list mgmt (obs) */
- ELS_GAID = 0x30, /* get alias_ID */
- ELS_FACT = 0x31, /* fabric activate alias_id */
- ELS_FDACDT = 0x32, /* fabric deactivate alias_id */
- ELS_NACT = 0x33, /* N-port activate alias_id */
- ELS_NDACT = 0x34, /* N-port deactivate alias_id */
- ELS_QOSR = 0x40, /* quality of service request */
- ELS_RVCS = 0x41, /* read virtual circuit status */
- ELS_PDISC = 0x50, /* discover N_port service params */
- ELS_FDISC = 0x51, /* discover F_port service params */
- ELS_ADISC = 0x52, /* discover address */
- ELS_RNC = 0x53, /* report node cap (obs) */
- ELS_FARP_REQ = 0x54, /* FC ARP request */
- ELS_FARP_REPL = 0x55, /* FC ARP reply */
- ELS_RPS = 0x56, /* read port status block */
- ELS_RPL = 0x57, /* read port list */
- ELS_RPBC = 0x58, /* read port buffer condition */
- ELS_FAN = 0x60, /* fabric address notification */
- ELS_RSCN = 0x61, /* registered state change notification */
- ELS_SCR = 0x62, /* state change registration */
- ELS_RNFT = 0x63, /* report node FC-4 types */
- ELS_CSR = 0x68, /* clock synch. request */
- ELS_CSU = 0x69, /* clock synch. update */
- ELS_LINIT = 0x70, /* loop initialize */
- ELS_LSTS = 0x72, /* loop status */
- ELS_RNID = 0x78, /* request node ID data */
- ELS_RLIR = 0x79, /* registered link incident report */
- ELS_LIRR = 0x7a, /* link incident record registration */
- ELS_SRL = 0x7b, /* scan remote loop */
- ELS_SBRP = 0x7c, /* set bit-error reporting params */
- ELS_RPSC = 0x7d, /* report speed capabilities */
- ELS_QSA = 0x7e, /* query security attributes */
- ELS_EVFP = 0x7f, /* exchange virt. fabrics params */
- ELS_LKA = 0x80, /* link keep-alive */
- ELS_AUTH_ELS = 0x90, /* authentication ELS */
-};
-
-/*
- * Initializer useful for decoding table.
- * Please keep this in sync with the above definitions.
- */
-#define FC_ELS_CMDS_INIT { \
- [ELS_LS_RJT] = "LS_RJT", \
- [ELS_LS_ACC] = "LS_ACC", \
- [ELS_PLOGI] = "PLOGI", \
- [ELS_FLOGI] = "FLOGI", \
- [ELS_LOGO] = "LOGO", \
- [ELS_ABTX] = "ABTX", \
- [ELS_RCS] = "RCS", \
- [ELS_RES] = "RES", \
- [ELS_RSS] = "RSS", \
- [ELS_RSI] = "RSI", \
- [ELS_ESTS] = "ESTS", \
- [ELS_ESTC] = "ESTC", \
- [ELS_ADVC] = "ADVC", \
- [ELS_RTV] = "RTV", \
- [ELS_RLS] = "RLS", \
- [ELS_ECHO] = "ECHO", \
- [ELS_TEST] = "TEST", \
- [ELS_RRQ] = "RRQ", \
- [ELS_REC] = "REC", \
- [ELS_SRR] = "SRR", \
- [ELS_PRLI] = "PRLI", \
- [ELS_PRLO] = "PRLO", \
- [ELS_SCN] = "SCN", \
- [ELS_TPLS] = "TPLS", \
- [ELS_TPRLO] = "TPRLO", \
- [ELS_LCLM] = "LCLM", \
- [ELS_GAID] = "GAID", \
- [ELS_FACT] = "FACT", \
- [ELS_FDACDT] = "FDACDT", \
- [ELS_NACT] = "NACT", \
- [ELS_NDACT] = "NDACT", \
- [ELS_QOSR] = "QOSR", \
- [ELS_RVCS] = "RVCS", \
- [ELS_PDISC] = "PDISC", \
- [ELS_FDISC] = "FDISC", \
- [ELS_ADISC] = "ADISC", \
- [ELS_RNC] = "RNC", \
- [ELS_FARP_REQ] = "FARP_REQ", \
- [ELS_FARP_REPL] = "FARP_REPL", \
- [ELS_RPS] = "RPS", \
- [ELS_RPL] = "RPL", \
- [ELS_RPBC] = "RPBC", \
- [ELS_FAN] = "FAN", \
- [ELS_RSCN] = "RSCN", \
- [ELS_SCR] = "SCR", \
- [ELS_RNFT] = "RNFT", \
- [ELS_CSR] = "CSR", \
- [ELS_CSU] = "CSU", \
- [ELS_LINIT] = "LINIT", \
- [ELS_LSTS] = "LSTS", \
- [ELS_RNID] = "RNID", \
- [ELS_RLIR] = "RLIR", \
- [ELS_LIRR] = "LIRR", \
- [ELS_SRL] = "SRL", \
- [ELS_SBRP] = "SBRP", \
- [ELS_RPSC] = "RPSC", \
- [ELS_QSA] = "QSA", \
- [ELS_EVFP] = "EVFP", \
- [ELS_LKA] = "LKA", \
- [ELS_AUTH_ELS] = "AUTH_ELS", \
-}
-
-/*
- * LS_ACC payload.
- */
-struct fc_els_ls_acc {
- __u8 la_cmd; /* command code ELS_LS_ACC */
- __u8 la_resv[3]; /* reserved */
-};
-
-/*
- * ELS reject payload.
- */
-struct fc_els_ls_rjt {
- __u8 er_cmd; /* command code ELS_LS_RJT */
- __u8 er_resv[4]; /* reserved must be zero */
- __u8 er_reason; /* reason (enum fc_els_rjt_reason below) */
- __u8 er_explan; /* explanation (enum fc_els_rjt_explan below) */
- __u8 er_vendor; /* vendor specific code */
-};
-
-/*
- * ELS reject reason codes (er_reason).
- */
-enum fc_els_rjt_reason {
- ELS_RJT_NONE = 0, /* no reject - not to be sent */
- ELS_RJT_INVAL = 0x01, /* invalid ELS command code */
- ELS_RJT_LOGIC = 0x03, /* logical error */
- ELS_RJT_BUSY = 0x05, /* logical busy */
- ELS_RJT_PROT = 0x07, /* protocol error */
- ELS_RJT_UNAB = 0x09, /* unable to perform command request */
- ELS_RJT_UNSUP = 0x0b, /* command not supported */
- ELS_RJT_INPROG = 0x0e, /* command already in progress */
- ELS_RJT_FIP = 0x20, /* FIP error */
- ELS_RJT_VENDOR = 0xff, /* vendor specific error */
-};
-
-
-/*
- * reason code explanation (er_explan).
- */
-enum fc_els_rjt_explan {
- ELS_EXPL_NONE = 0x00, /* No additional explanation */
- ELS_EXPL_SPP_OPT_ERR = 0x01, /* service parameter error - options */
- ELS_EXPL_SPP_ICTL_ERR = 0x03, /* service parm error - initiator ctl */
- ELS_EXPL_AH = 0x11, /* invalid association header */
- ELS_EXPL_AH_REQ = 0x13, /* association_header required */
- ELS_EXPL_SID = 0x15, /* invalid originator S_ID */
- ELS_EXPL_OXID_RXID = 0x17, /* invalid OX_ID-RX_ID combination */
- ELS_EXPL_INPROG = 0x19, /* Request already in progress */
- ELS_EXPL_PLOGI_REQD = 0x1e, /* N_Port login required */
- ELS_EXPL_INSUF_RES = 0x29, /* insufficient resources */
- ELS_EXPL_UNAB_DATA = 0x2a, /* unable to supply requested data */
- ELS_EXPL_UNSUPR = 0x2c, /* Request not supported */
- ELS_EXPL_INV_LEN = 0x2d, /* Invalid payload length */
- ELS_EXPL_NOT_NEIGHBOR = 0x62, /* VN2VN_Port not in neighbor set */
- /* TBD - above definitions incomplete */
-};
-
-/*
- * Common service parameters (N ports).
- */
-struct fc_els_csp {
- __u8 sp_hi_ver; /* highest version supported (obs.) */
- __u8 sp_lo_ver; /* highest version supported (obs.) */
- __be16 sp_bb_cred; /* buffer-to-buffer credits */
- __be16 sp_features; /* common feature flags */
- __be16 sp_bb_data; /* b-b state number and data field sz */
- union {
- struct {
- __be16 _sp_tot_seq; /* total concurrent sequences */
- __be16 _sp_rel_off; /* rel. offset by info cat */
- } sp_plogi;
- struct {
- __be32 _sp_r_a_tov; /* resource alloc. timeout msec */
- } sp_flogi_acc;
- } sp_u;
- __be32 sp_e_d_tov; /* error detect timeout value */
-};
-#define sp_tot_seq sp_u.sp_plogi._sp_tot_seq
-#define sp_rel_off sp_u.sp_plogi._sp_rel_off
-#define sp_r_a_tov sp_u.sp_flogi_acc._sp_r_a_tov
-
-#define FC_SP_BB_DATA_MASK 0xfff /* mask for data field size in sp_bb_data */
-
-/*
- * Minimum and maximum values for max data field size in service parameters.
- */
-#define FC_SP_MIN_MAX_PAYLOAD FC_MIN_MAX_PAYLOAD
-#define FC_SP_MAX_MAX_PAYLOAD FC_MAX_PAYLOAD
-
-/*
- * sp_features
- */
-#define FC_SP_FT_NPIV 0x8000 /* multiple N_Port_ID support (FLOGI) */
-#define FC_SP_FT_CIRO 0x8000 /* continuously increasing rel off (PLOGI) */
-#define FC_SP_FT_CLAD 0x8000 /* clean address (in FLOGI LS_ACC) */
-#define FC_SP_FT_RAND 0x4000 /* random relative offset */
-#define FC_SP_FT_VAL 0x2000 /* valid vendor version level */
-#define FC_SP_FT_NPIV_ACC 0x2000 /* NPIV assignment (FLOGI LS_ACC) */
-#define FC_SP_FT_FPORT 0x1000 /* F port (1) vs. N port (0) */
-#define FC_SP_FT_ABB 0x0800 /* alternate BB_credit management */
-#define FC_SP_FT_EDTR 0x0400 /* E_D_TOV Resolution is nanoseconds */
-#define FC_SP_FT_MCAST 0x0200 /* multicast */
-#define FC_SP_FT_BCAST 0x0100 /* broadcast */
-#define FC_SP_FT_HUNT 0x0080 /* hunt group */
-#define FC_SP_FT_SIMP 0x0040 /* dedicated simplex */
-#define FC_SP_FT_SEC 0x0020 /* reserved for security */
-#define FC_SP_FT_CSYN 0x0010 /* clock synch. supported */
-#define FC_SP_FT_RTTOV 0x0008 /* R_T_TOV value 100 uS, else 100 mS */
-#define FC_SP_FT_HALF 0x0004 /* dynamic half duplex */
-#define FC_SP_FT_SEQC 0x0002 /* SEQ_CNT */
-#define FC_SP_FT_PAYL 0x0001 /* FLOGI payload length 256, else 116 */
-
-/*
- * Class-specific service parameters.
- */
-struct fc_els_cssp {
- __be16 cp_class; /* class flags */
- __be16 cp_init; /* initiator flags */
- __be16 cp_recip; /* recipient flags */
- __be16 cp_rdfs; /* receive data field size */
- __be16 cp_con_seq; /* concurrent sequences */
- __be16 cp_ee_cred; /* N-port end-to-end credit */
- __u8 cp_resv1; /* reserved */
- __u8 cp_open_seq; /* open sequences per exchange */
- __u8 _cp_resv2[2]; /* reserved */
-};
-
-/*
- * cp_class flags.
- */
-#define FC_CPC_VALID 0x8000 /* class valid */
-#define FC_CPC_IMIX 0x4000 /* intermix mode */
-#define FC_CPC_SEQ 0x0800 /* sequential delivery */
-#define FC_CPC_CAMP 0x0200 /* camp-on */
-#define FC_CPC_PRI 0x0080 /* priority */
-
-/*
- * cp_init flags.
- * (TBD: not all flags defined here).
- */
-#define FC_CPI_CSYN 0x0010 /* clock synch. capable */
-
-/*
- * cp_recip flags.
- */
-#define FC_CPR_CSYN 0x0008 /* clock synch. capable */
-
-/*
- * NFC_ELS_FLOGI: Fabric login request.
- * NFC_ELS_PLOGI: Port login request (same format).
- */
-struct fc_els_flogi {
- __u8 fl_cmd; /* command */
- __u8 _fl_resvd[3]; /* must be zero */
- struct fc_els_csp fl_csp; /* common service parameters */
- __be64 fl_wwpn; /* port name */
- __be64 fl_wwnn; /* node name */
- struct fc_els_cssp fl_cssp[4]; /* class 1-4 service parameters */
- __u8 fl_vend[16]; /* vendor version level */
-} __attribute__((__packed__));
-
-/*
- * Process login service parameter page.
- */
-struct fc_els_spp {
- __u8 spp_type; /* type code or common service params */
- __u8 spp_type_ext; /* type code extension */
- __u8 spp_flags;
- __u8 _spp_resvd;
- __be32 spp_orig_pa; /* originator process associator */
- __be32 spp_resp_pa; /* responder process associator */
- __be32 spp_params; /* service parameters */
-};
-
-/*
- * spp_flags.
- */
-#define FC_SPP_OPA_VAL 0x80 /* originator proc. assoc. valid */
-#define FC_SPP_RPA_VAL 0x40 /* responder proc. assoc. valid */
-#define FC_SPP_EST_IMG_PAIR 0x20 /* establish image pair */
-#define FC_SPP_RESP_MASK 0x0f /* mask for response code (below) */
-
-/*
- * SPP response code in spp_flags - lower 4 bits.
- */
-enum fc_els_spp_resp {
- FC_SPP_RESP_ACK = 1, /* request executed */
- FC_SPP_RESP_RES = 2, /* unable due to lack of resources */
- FC_SPP_RESP_INIT = 3, /* initialization not complete */
- FC_SPP_RESP_NO_PA = 4, /* unknown process associator */
- FC_SPP_RESP_CONF = 5, /* configuration precludes image pair */
- FC_SPP_RESP_COND = 6, /* request completed conditionally */
- FC_SPP_RESP_MULT = 7, /* unable to handle multiple SPPs */
- FC_SPP_RESP_INVL = 8, /* SPP is invalid */
-};
-
-/*
- * ELS_RRQ - Reinstate Recovery Qualifier
- */
-struct fc_els_rrq {
- __u8 rrq_cmd; /* command (0x12) */
- __u8 rrq_zero[3]; /* specified as zero - part of cmd */
- __u8 rrq_resvd; /* reserved */
- __u8 rrq_s_id[3]; /* originator FID */
- __be16 rrq_ox_id; /* originator exchange ID */
- __be16 rrq_rx_id; /* responders exchange ID */
-};
-
-/*
- * ELS_REC - Read exchange concise.
- */
-struct fc_els_rec {
- __u8 rec_cmd; /* command (0x13) */
- __u8 rec_zero[3]; /* specified as zero - part of cmd */
- __u8 rec_resvd; /* reserved */
- __u8 rec_s_id[3]; /* originator FID */
- __be16 rec_ox_id; /* originator exchange ID */
- __be16 rec_rx_id; /* responders exchange ID */
-};
-
-/*
- * ELS_REC LS_ACC payload.
- */
-struct fc_els_rec_acc {
- __u8 reca_cmd; /* accept (0x02) */
- __u8 reca_zero[3]; /* specified as zero - part of cmd */
- __be16 reca_ox_id; /* originator exchange ID */
- __be16 reca_rx_id; /* responders exchange ID */
- __u8 reca_resvd1; /* reserved */
- __u8 reca_ofid[3]; /* originator FID */
- __u8 reca_resvd2; /* reserved */
- __u8 reca_rfid[3]; /* responder FID */
- __be32 reca_fc4value; /* FC4 value */
- __be32 reca_e_stat; /* ESB (exchange status block) status */
-};
-
-/*
- * ELS_PRLI - Process login request and response.
- */
-struct fc_els_prli {
- __u8 prli_cmd; /* command */
- __u8 prli_spp_len; /* length of each serv. parm. page */
- __be16 prli_len; /* length of entire payload */
- /* service parameter pages follow */
-};
-
-/*
- * ELS_PRLO - Process logout request and response.
- */
-struct fc_els_prlo {
- __u8 prlo_cmd; /* command */
- __u8 prlo_obs; /* obsolete, but shall be set to 10h */
- __be16 prlo_len; /* payload length */
-};
-
-/*
- * ELS_ADISC payload
- */
-struct fc_els_adisc {
- __u8 adisc_cmd;
- __u8 adisc_resv[3];
- __u8 adisc_resv1;
- __u8 adisc_hard_addr[3];
- __be64 adisc_wwpn;
- __be64 adisc_wwnn;
- __u8 adisc_resv2;
- __u8 adisc_port_id[3];
-} __attribute__((__packed__));
-
-/*
- * ELS_LOGO - process or fabric logout.
- */
-struct fc_els_logo {
- __u8 fl_cmd; /* command code */
- __u8 fl_zero[3]; /* specified as zero - part of cmd */
- __u8 fl_resvd; /* reserved */
- __u8 fl_n_port_id[3];/* N port ID */
- __be64 fl_n_port_wwn; /* port name */
-};
-
-/*
- * ELS_RTV - read timeout value.
- */
-struct fc_els_rtv {
- __u8 rtv_cmd; /* command code 0x0e */
- __u8 rtv_zero[3]; /* specified as zero - part of cmd */
-};
-
-/*
- * LS_ACC for ELS_RTV - read timeout value.
- */
-struct fc_els_rtv_acc {
- __u8 rtv_cmd; /* command code 0x02 */
- __u8 rtv_zero[3]; /* specified as zero - part of cmd */
- __be32 rtv_r_a_tov; /* resource allocation timeout value */
- __be32 rtv_e_d_tov; /* error detection timeout value */
- __be32 rtv_toq; /* timeout qualifier (see below) */
-};
-
-/*
- * rtv_toq bits.
- */
-#define FC_ELS_RTV_EDRES (1 << 26) /* E_D_TOV resolution is nS else mS */
-#define FC_ELS_RTV_RTTOV (1 << 19) /* R_T_TOV is 100 uS else 100 mS */
-
-/*
- * ELS_SCR - state change registration payload.
- */
-struct fc_els_scr {
- __u8 scr_cmd; /* command code */
- __u8 scr_resv[6]; /* reserved */
- __u8 scr_reg_func; /* registration function (see below) */
-};
-
-enum fc_els_scr_func {
- ELS_SCRF_FAB = 1, /* fabric-detected registration */
- ELS_SCRF_NPORT = 2, /* Nx_Port-detected registration */
- ELS_SCRF_FULL = 3, /* full registration */
- ELS_SCRF_CLEAR = 255, /* remove any current registrations */
-};
-
-/*
- * ELS_RSCN - registered state change notification payload.
- */
-struct fc_els_rscn {
- __u8 rscn_cmd; /* RSCN opcode (0x61) */
- __u8 rscn_page_len; /* page length (4) */
- __be16 rscn_plen; /* payload length including this word */
-
- /* followed by 4-byte generic affected Port_ID pages */
-};
-
-struct fc_els_rscn_page {
- __u8 rscn_page_flags; /* event and address format */
- __u8 rscn_fid[3]; /* fabric ID */
-};
-
-#define ELS_RSCN_EV_QUAL_BIT 2 /* shift count for event qualifier */
-#define ELS_RSCN_EV_QUAL_MASK 0xf /* mask for event qualifier */
-#define ELS_RSCN_ADDR_FMT_BIT 0 /* shift count for address format */
-#define ELS_RSCN_ADDR_FMT_MASK 0x3 /* mask for address format */
-
-enum fc_els_rscn_ev_qual {
- ELS_EV_QUAL_NONE = 0, /* unspecified */
- ELS_EV_QUAL_NS_OBJ = 1, /* changed name server object */
- ELS_EV_QUAL_PORT_ATTR = 2, /* changed port attribute */
- ELS_EV_QUAL_SERV_OBJ = 3, /* changed service object */
- ELS_EV_QUAL_SW_CONFIG = 4, /* changed switch configuration */
- ELS_EV_QUAL_REM_OBJ = 5, /* removed object */
-};
-
-enum fc_els_rscn_addr_fmt {
- ELS_ADDR_FMT_PORT = 0, /* rscn_fid is a port address */
- ELS_ADDR_FMT_AREA = 1, /* rscn_fid is a area address */
- ELS_ADDR_FMT_DOM = 2, /* rscn_fid is a domain address */
- ELS_ADDR_FMT_FAB = 3, /* anything on fabric may have changed */
-};
-
-/*
- * ELS_RNID - request Node ID.
- */
-struct fc_els_rnid {
- __u8 rnid_cmd; /* RNID opcode (0x78) */
- __u8 rnid_resv[3]; /* reserved */
- __u8 rnid_fmt; /* data format */
- __u8 rnid_resv2[3]; /* reserved */
-};
-
-/*
- * Node Identification Data formats (rnid_fmt)
- */
-enum fc_els_rnid_fmt {
- ELS_RNIDF_NONE = 0, /* no specific identification data */
- ELS_RNIDF_GEN = 0xdf, /* general topology discovery format */
-};
-
-/*
- * ELS_RNID response.
- */
-struct fc_els_rnid_resp {
- __u8 rnid_cmd; /* response code (LS_ACC) */
- __u8 rnid_resv[3]; /* reserved */
- __u8 rnid_fmt; /* data format */
- __u8 rnid_cid_len; /* common ID data length */
- __u8 rnid_resv2; /* reserved */
- __u8 rnid_sid_len; /* specific ID data length */
-};
-
-struct fc_els_rnid_cid {
- __be64 rnid_wwpn; /* N port name */
- __be64 rnid_wwnn; /* node name */
-};
-
-struct fc_els_rnid_gen {
- __u8 rnid_vend_id[16]; /* vendor-unique ID */
- __be32 rnid_atype; /* associated type (see below) */
- __be32 rnid_phys_port; /* physical port number */
- __be32 rnid_att_nodes; /* number of attached nodes */
- __u8 rnid_node_mgmt; /* node management (see below) */
- __u8 rnid_ip_ver; /* IP version (see below) */
- __be16 rnid_prot_port; /* UDP / TCP port number */
- __be32 rnid_ip_addr[4]; /* IP address */
- __u8 rnid_resvd[2]; /* reserved */
- __be16 rnid_vend_spec; /* vendor-specific field */
-};
-
-enum fc_els_rnid_atype {
- ELS_RNIDA_UNK = 0x01, /* unknown */
- ELS_RNIDA_OTHER = 0x02, /* none of the following */
- ELS_RNIDA_HUB = 0x03,
- ELS_RNIDA_SWITCH = 0x04,
- ELS_RNIDA_GATEWAY = 0x05,
- ELS_RNIDA_CONV = 0x06, /* Obsolete, do not use this value */
- ELS_RNIDA_HBA = 0x07, /* Obsolete, do not use this value */
- ELS_RNIDA_PROXY = 0x08, /* Obsolete, do not use this value */
- ELS_RNIDA_STORAGE = 0x09,
- ELS_RNIDA_HOST = 0x0a,
- ELS_RNIDA_SUBSYS = 0x0b, /* storage subsystem (e.g., RAID) */
- ELS_RNIDA_ACCESS = 0x0e, /* access device (e.g. media changer) */
- ELS_RNIDA_NAS = 0x11, /* NAS server */
- ELS_RNIDA_BRIDGE = 0x12, /* bridge */
- ELS_RNIDA_VIRT = 0x13, /* virtualization device */
- ELS_RNIDA_MF = 0xff, /* multifunction device (bits below) */
- ELS_RNIDA_MF_HUB = 1UL << 31, /* hub */
- ELS_RNIDA_MF_SW = 1UL << 30, /* switch */
- ELS_RNIDA_MF_GW = 1UL << 29, /* gateway */
- ELS_RNIDA_MF_ST = 1UL << 28, /* storage */
- ELS_RNIDA_MF_HOST = 1UL << 27, /* host */
- ELS_RNIDA_MF_SUB = 1UL << 26, /* storage subsystem */
- ELS_RNIDA_MF_ACC = 1UL << 25, /* storage access dev */
- ELS_RNIDA_MF_WDM = 1UL << 24, /* wavelength division mux */
- ELS_RNIDA_MF_NAS = 1UL << 23, /* NAS server */
- ELS_RNIDA_MF_BR = 1UL << 22, /* bridge */
- ELS_RNIDA_MF_VIRT = 1UL << 21, /* virtualization device */
-};
-
-enum fc_els_rnid_mgmt {
- ELS_RNIDM_SNMP = 0,
- ELS_RNIDM_TELNET = 1,
- ELS_RNIDM_HTTP = 2,
- ELS_RNIDM_HTTPS = 3,
- ELS_RNIDM_XML = 4, /* HTTP + XML */
-};
-
-enum fc_els_rnid_ipver {
- ELS_RNIDIP_NONE = 0, /* no IP support or node mgmt. */
- ELS_RNIDIP_V4 = 1, /* IPv4 */
- ELS_RNIDIP_V6 = 2, /* IPv6 */
-};
-
-/*
- * ELS RPL - Read Port List.
- */
-struct fc_els_rpl {
- __u8 rpl_cmd; /* command */
- __u8 rpl_resv[5]; /* reserved - must be zero */
- __be16 rpl_max_size; /* maximum response size or zero */
- __u8 rpl_resv1; /* reserved - must be zero */
- __u8 rpl_index[3]; /* starting index */
-};
-
-/*
- * Port number block in RPL response.
- */
-struct fc_els_pnb {
- __be32 pnb_phys_pn; /* physical port number */
- __u8 pnb_resv; /* reserved */
- __u8 pnb_port_id[3]; /* port ID */
- __be64 pnb_wwpn; /* port name */
-};
-
-/*
- * RPL LS_ACC response.
- */
-struct fc_els_rpl_resp {
- __u8 rpl_cmd; /* ELS_LS_ACC */
- __u8 rpl_resv1; /* reserved - must be zero */
- __be16 rpl_plen; /* payload length */
- __u8 rpl_resv2; /* reserved - must be zero */
- __u8 rpl_llen[3]; /* list length */
- __u8 rpl_resv3; /* reserved - must be zero */
- __u8 rpl_index[3]; /* starting index */
- struct fc_els_pnb rpl_pnb[1]; /* variable number of PNBs */
-};
-
-/*
- * Link Error Status Block.
- */
-struct fc_els_lesb {
- __be32 lesb_link_fail; /* link failure count */
- __be32 lesb_sync_loss; /* loss of synchronization count */
- __be32 lesb_sig_loss; /* loss of signal count */
- __be32 lesb_prim_err; /* primitive sequence error count */
- __be32 lesb_inv_word; /* invalid transmission word count */
- __be32 lesb_inv_crc; /* invalid CRC count */
-};
-
-/*
- * ELS RPS - Read Port Status Block request.
- */
-struct fc_els_rps {
- __u8 rps_cmd; /* command */
- __u8 rps_resv[2]; /* reserved - must be zero */
- __u8 rps_flag; /* flag - see below */
- __be64 rps_port_spec; /* port selection */
-};
-
-enum fc_els_rps_flag {
- FC_ELS_RPS_DID = 0x00, /* port identified by D_ID of req. */
- FC_ELS_RPS_PPN = 0x01, /* port_spec is physical port number */
- FC_ELS_RPS_WWPN = 0x02, /* port_spec is port WWN */
-};
-
-/*
- * ELS RPS LS_ACC response.
- */
-struct fc_els_rps_resp {
- __u8 rps_cmd; /* command - LS_ACC */
- __u8 rps_resv[2]; /* reserved - must be zero */
- __u8 rps_flag; /* flag - see below */
- __u8 rps_resv2[2]; /* reserved */
- __be16 rps_status; /* port status - see below */
- struct fc_els_lesb rps_lesb; /* link error status block */
-};
-
-enum fc_els_rps_resp_flag {
- FC_ELS_RPS_LPEV = 0x01, /* L_port extension valid */
-};
-
-enum fc_els_rps_resp_status {
- FC_ELS_RPS_PTP = 1 << 5, /* point-to-point connection */
- FC_ELS_RPS_LOOP = 1 << 4, /* loop mode */
- FC_ELS_RPS_FAB = 1 << 3, /* fabric present */
- FC_ELS_RPS_NO_SIG = 1 << 2, /* loss of signal */
- FC_ELS_RPS_NO_SYNC = 1 << 1, /* loss of synchronization */
- FC_ELS_RPS_RESET = 1 << 0, /* in link reset protocol */
-};
-
-/*
- * ELS LIRR - Link Incident Record Registration request.
- */
-struct fc_els_lirr {
- __u8 lirr_cmd; /* command */
- __u8 lirr_resv[3]; /* reserved - must be zero */
- __u8 lirr_func; /* registration function */
- __u8 lirr_fmt; /* FC-4 type of RLIR requested */
- __u8 lirr_resv2[2]; /* reserved - must be zero */
-};
-
-enum fc_els_lirr_func {
- ELS_LIRR_SET_COND = 0x01, /* set - conditionally receive */
- ELS_LIRR_SET_UNCOND = 0x02, /* set - unconditionally receive */
- ELS_LIRR_CLEAR = 0xff /* clear registration */
-};
-
-/*
- * ELS SRL - Scan Remote Loop request.
- */
-struct fc_els_srl {
- __u8 srl_cmd; /* command */
- __u8 srl_resv[3]; /* reserved - must be zero */
- __u8 srl_flag; /* flag - see below */
- __u8 srl_flag_param[3]; /* flag parameter */
-};
-
-enum fc_els_srl_flag {
- FC_ELS_SRL_ALL = 0x00, /* scan all FL ports */
- FC_ELS_SRL_ONE = 0x01, /* scan specified loop */
- FC_ELS_SRL_EN_PER = 0x02, /* enable periodic scanning (param) */
- FC_ELS_SRL_DIS_PER = 0x03, /* disable periodic scanning */
-};
-
-/*
- * ELS RLS - Read Link Error Status Block request.
- */
-struct fc_els_rls {
- __u8 rls_cmd; /* command */
- __u8 rls_resv[4]; /* reserved - must be zero */
- __u8 rls_port_id[3]; /* port ID */
-};
-
-/*
- * ELS RLS LS_ACC Response.
- */
-struct fc_els_rls_resp {
- __u8 rls_cmd; /* ELS_LS_ACC */
- __u8 rls_resv[3]; /* reserved - must be zero */
- struct fc_els_lesb rls_lesb; /* link error status block */
-};
-
-/*
- * ELS RLIR - Registered Link Incident Report.
- * This is followed by the CLIR and the CLID, described below.
- */
-struct fc_els_rlir {
- __u8 rlir_cmd; /* command */
- __u8 rlir_resv[3]; /* reserved - must be zero */
- __u8 rlir_fmt; /* format (FC4-type if type specific) */
- __u8 rlir_clr_len; /* common link incident record length */
- __u8 rlir_cld_len; /* common link incident desc. length */
- __u8 rlir_slr_len; /* spec. link incident record length */
-};
-
-/*
- * CLIR - Common Link Incident Record Data. - Sent via RLIR.
- */
-struct fc_els_clir {
- __be64 clir_wwpn; /* incident port name */
- __be64 clir_wwnn; /* incident port node name */
- __u8 clir_port_type; /* incident port type */
- __u8 clir_port_id[3]; /* incident port ID */
-
- __be64 clir_conn_wwpn; /* connected port name */
- __be64 clir_conn_wwnn; /* connected node name */
- __be64 clir_fab_name; /* fabric name */
- __be32 clir_phys_port; /* physical port number */
- __be32 clir_trans_id; /* transaction ID */
- __u8 clir_resv[3]; /* reserved */
- __u8 clir_ts_fmt; /* time stamp format */
- __be64 clir_timestamp; /* time stamp */
-};
-
-/*
- * CLIR clir_ts_fmt - time stamp format values.
- */
-enum fc_els_clir_ts_fmt {
- ELS_CLIR_TS_UNKNOWN = 0, /* time stamp field unknown */
- ELS_CLIR_TS_SEC_FRAC = 1, /* time in seconds and fractions */
- ELS_CLIR_TS_CSU = 2, /* time in clock synch update format */
-};
-
-/*
- * Common Link Incident Descriptor - sent via RLIR.
- */
-struct fc_els_clid {
- __u8 clid_iq; /* incident qualifier flags */
- __u8 clid_ic; /* incident code */
- __be16 clid_epai; /* domain/area of ISL */
-};
-
-/*
- * CLID incident qualifier flags.
- */
-enum fc_els_clid_iq {
- ELS_CLID_SWITCH = 0x20, /* incident port is a switch node */
- ELS_CLID_E_PORT = 0x10, /* incident is an ISL (E) port */
- ELS_CLID_SEV_MASK = 0x0c, /* severity 2-bit field mask */
- ELS_CLID_SEV_INFO = 0x00, /* report is informational */
- ELS_CLID_SEV_INOP = 0x08, /* link not operational */
- ELS_CLID_SEV_DEG = 0x04, /* link degraded but operational */
- ELS_CLID_LASER = 0x02, /* subassembly is a laser */
- ELS_CLID_FRU = 0x01, /* format can identify a FRU */
-};
-
-/*
- * CLID incident code.
- */
-enum fc_els_clid_ic {
- ELS_CLID_IC_IMPL = 1, /* implicit incident */
- ELS_CLID_IC_BER = 2, /* bit-error-rate threshold exceeded */
- ELS_CLID_IC_LOS = 3, /* loss of synch or signal */
- ELS_CLID_IC_NOS = 4, /* non-operational primitive sequence */
- ELS_CLID_IC_PST = 5, /* primitive sequence timeout */
- ELS_CLID_IC_INVAL = 6, /* invalid primitive sequence */
- ELS_CLID_IC_LOOP_TO = 7, /* loop initialization time out */
- ELS_CLID_IC_LIP = 8, /* receiving LIP */
-};
-
-#endif /* _FC_ELS_H_ */
diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h
deleted file mode 100644
index 50f28b1..0000000
--- a/include/scsi/fc/fc_fs.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * Copyright(c) 2007 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Maintained at www.Open-FCoE.org
- */
-
-#ifndef _FC_FS_H_
-#define _FC_FS_H_
-
-#include <linux/types.h>
-
-/*
- * Fibre Channel Framing and Signalling definitions.
- * From T11 FC-FS-2 Rev 0.90 - 9 August 2005.
- */
-
-/*
- * Frame header
- */
-struct fc_frame_header {
- __u8 fh_r_ctl; /* routing control */
- __u8 fh_d_id[3]; /* Destination ID */
-
- __u8 fh_cs_ctl; /* class of service control / pri */
- __u8 fh_s_id[3]; /* Source ID */
-
- __u8 fh_type; /* see enum fc_fh_type below */
- __u8 fh_f_ctl[3]; /* frame control */
-
- __u8 fh_seq_id; /* sequence ID */
- __u8 fh_df_ctl; /* data field control */
- __be16 fh_seq_cnt; /* sequence count */
-
- __be16 fh_ox_id; /* originator exchange ID */
- __be16 fh_rx_id; /* responder exchange ID */
- __be32 fh_parm_offset; /* parameter or relative offset */
-};
-
-#define FC_FRAME_HEADER_LEN 24 /* expected length of structure */
-
-#define FC_MAX_PAYLOAD 2112U /* max payload length in bytes */
-#define FC_MIN_MAX_PAYLOAD 256U /* lower limit on max payload */
-
-#define FC_MAX_FRAME (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
-#define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
-
-/*
- * fh_r_ctl - Routing control definitions.
- */
- /*
- * FC-4 device_data.
- */
-enum fc_rctl {
- FC_RCTL_DD_UNCAT = 0x00, /* uncategorized information */
- FC_RCTL_DD_SOL_DATA = 0x01, /* solicited data */
- FC_RCTL_DD_UNSOL_CTL = 0x02, /* unsolicited control */
- FC_RCTL_DD_SOL_CTL = 0x03, /* solicited control or reply */
- FC_RCTL_DD_UNSOL_DATA = 0x04, /* unsolicited data */
- FC_RCTL_DD_DATA_DESC = 0x05, /* data descriptor */
- FC_RCTL_DD_UNSOL_CMD = 0x06, /* unsolicited command */
- FC_RCTL_DD_CMD_STATUS = 0x07, /* command status */
-
-#define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL /* ILS request */
-#define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL /* ILS reply */
-
- /*
- * Extended Link_Data
- */
- FC_RCTL_ELS_REQ = 0x22, /* extended link services request */
- FC_RCTL_ELS_REP = 0x23, /* extended link services reply */
- FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */
- FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */
- /*
- * Optional Extended Headers
- */
- FC_RCTL_VFTH = 0x50, /* virtual fabric tagging header */
- FC_RCTL_IFRH = 0x51, /* inter-fabric routing header */
- FC_RCTL_ENCH = 0x52, /* encapsulation header */
- /*
- * Basic Link Services fh_r_ctl values.
- */
- FC_RCTL_BA_NOP = 0x80, /* basic link service NOP */
- FC_RCTL_BA_ABTS = 0x81, /* basic link service abort */
- FC_RCTL_BA_RMC = 0x82, /* remove connection */
- FC_RCTL_BA_ACC = 0x84, /* basic accept */
- FC_RCTL_BA_RJT = 0x85, /* basic reject */
- FC_RCTL_BA_PRMT = 0x86, /* dedicated connection preempted */
- /*
- * Link Control Information.
- */
- FC_RCTL_ACK_1 = 0xc0, /* acknowledge_1 */
- FC_RCTL_ACK_0 = 0xc1, /* acknowledge_0 */
- FC_RCTL_P_RJT = 0xc2, /* port reject */
- FC_RCTL_F_RJT = 0xc3, /* fabric reject */
- FC_RCTL_P_BSY = 0xc4, /* port busy */
- FC_RCTL_F_BSY = 0xc5, /* fabric busy to data frame */
- FC_RCTL_F_BSYL = 0xc6, /* fabric busy to link control frame */
- FC_RCTL_LCR = 0xc7, /* link credit reset */
- FC_RCTL_END = 0xc9, /* end */
-};
- /* incomplete list of definitions */
-
-/*
- * R_CTL names initializer.
- * Please keep this matching the above definitions.
- */
-#define FC_RCTL_NAMES_INIT { \
- [FC_RCTL_DD_UNCAT] = "uncat", \
- [FC_RCTL_DD_SOL_DATA] = "sol data", \
- [FC_RCTL_DD_UNSOL_CTL] = "unsol ctl", \
- [FC_RCTL_DD_SOL_CTL] = "sol ctl/reply", \
- [FC_RCTL_DD_UNSOL_DATA] = "unsol data", \
- [FC_RCTL_DD_DATA_DESC] = "data desc", \
- [FC_RCTL_DD_UNSOL_CMD] = "unsol cmd", \
- [FC_RCTL_DD_CMD_STATUS] = "cmd status", \
- [FC_RCTL_ELS_REQ] = "ELS req", \
- [FC_RCTL_ELS_REP] = "ELS rep", \
- [FC_RCTL_ELS4_REQ] = "FC-4 ELS req", \
- [FC_RCTL_ELS4_REP] = "FC-4 ELS rep", \
- [FC_RCTL_BA_NOP] = "BLS NOP", \
- [FC_RCTL_BA_ABTS] = "BLS abort", \
- [FC_RCTL_BA_RMC] = "BLS remove connection", \
- [FC_RCTL_BA_ACC] = "BLS accept", \
- [FC_RCTL_BA_RJT] = "BLS reject", \
- [FC_RCTL_BA_PRMT] = "BLS dedicated connection preempted", \
- [FC_RCTL_ACK_1] = "LC ACK_1", \
- [FC_RCTL_ACK_0] = "LC ACK_0", \
- [FC_RCTL_P_RJT] = "LC port reject", \
- [FC_RCTL_F_RJT] = "LC fabric reject", \
- [FC_RCTL_P_BSY] = "LC port busy", \
- [FC_RCTL_F_BSY] = "LC fabric busy to data frame", \
- [FC_RCTL_F_BSYL] = "LC fabric busy to link control frame",\
- [FC_RCTL_LCR] = "LC link credit reset", \
- [FC_RCTL_END] = "LC end", \
-}
-
-/*
- * Well-known fabric addresses.
- */
-enum fc_well_known_fid {
- FC_FID_NONE = 0x000000, /* No destination */
- FC_FID_BCAST = 0xffffff, /* broadcast */
- FC_FID_FLOGI = 0xfffffe, /* fabric login */
- FC_FID_FCTRL = 0xfffffd, /* fabric controller */
- FC_FID_DIR_SERV = 0xfffffc, /* directory server */
- FC_FID_TIME_SERV = 0xfffffb, /* time server */
- FC_FID_MGMT_SERV = 0xfffffa, /* management server */
- FC_FID_QOS = 0xfffff9, /* QoS Facilitator */
- FC_FID_ALIASES = 0xfffff8, /* alias server (FC-PH2) */
- FC_FID_SEC_KEY = 0xfffff7, /* Security key dist. server */
- FC_FID_CLOCK = 0xfffff6, /* clock synch server */
- FC_FID_MCAST_SERV = 0xfffff5, /* multicast server */
-};
-
-#define FC_FID_WELL_KNOWN_MAX 0xffffff /* highest well-known fabric ID */
-#define FC_FID_WELL_KNOWN_BASE 0xfffff5 /* start of well-known fabric ID */
-
-/*
- * Other well-known addresses, outside the above contiguous range.
- */
-#define FC_FID_DOM_MGR 0xfffc00 /* domain manager base */
-
-/*
- * Fabric ID bytes.
- */
-#define FC_FID_DOMAIN 0
-#define FC_FID_PORT 1
-#define FC_FID_LINK 2
-
-/*
- * fh_type codes
- */
-enum fc_fh_type {
- FC_TYPE_BLS = 0x00, /* basic link service */
- FC_TYPE_ELS = 0x01, /* extended link service */
- FC_TYPE_IP = 0x05, /* IP over FC, RFC 4338 */
- FC_TYPE_FCP = 0x08, /* SCSI FCP */
- FC_TYPE_CT = 0x20, /* Fibre Channel Services (FC-CT) */
- FC_TYPE_ILS = 0x22, /* internal link service */
-};
-
-/*
- * FC_TYPE names initializer.
- * Please keep this matching the above definitions.
- */
-#define FC_TYPE_NAMES_INIT { \
- [FC_TYPE_BLS] = "BLS", \
- [FC_TYPE_ELS] = "ELS", \
- [FC_TYPE_IP] = "IP", \
- [FC_TYPE_FCP] = "FCP", \
- [FC_TYPE_CT] = "CT", \
- [FC_TYPE_ILS] = "ILS", \
-}
-
-/*
- * Exchange IDs.
- */
-#define FC_XID_UNKNOWN 0xffff /* unknown exchange ID */
-#define FC_XID_MIN 0x0 /* supported min exchange ID */
-#define FC_XID_MAX 0xfffe /* supported max exchange ID */
-
-/*
- * fh_f_ctl - Frame control flags.
- */
-#define FC_FC_EX_CTX (1 << 23) /* sent by responder to exchange */
-#define FC_FC_SEQ_CTX (1 << 22) /* sent by responder to sequence */
-#define FC_FC_FIRST_SEQ (1 << 21) /* first sequence of this exchange */
-#define FC_FC_LAST_SEQ (1 << 20) /* last sequence of this exchange */
-#define FC_FC_END_SEQ (1 << 19) /* last frame of sequence */
-#define FC_FC_END_CONN (1 << 18) /* end of class 1 connection pending */
-#define FC_FC_RES_B17 (1 << 17) /* reserved */
-#define FC_FC_SEQ_INIT (1 << 16) /* transfer of sequence initiative */
-#define FC_FC_X_ID_REASS (1 << 15) /* exchange ID has been changed */
-#define FC_FC_X_ID_INVAL (1 << 14) /* exchange ID invalidated */
-
-#define FC_FC_ACK_1 (1 << 12) /* 13:12 = 1: ACK_1 expected */
-#define FC_FC_ACK_N (2 << 12) /* 13:12 = 2: ACK_N expected */
-#define FC_FC_ACK_0 (3 << 12) /* 13:12 = 3: ACK_0 expected */
-
-#define FC_FC_RES_B11 (1 << 11) /* reserved */
-#define FC_FC_RES_B10 (1 << 10) /* reserved */
-#define FC_FC_RETX_SEQ (1 << 9) /* retransmitted sequence */
-#define FC_FC_UNI_TX (1 << 8) /* unidirectional transmit (class 1) */
-#define FC_FC_CONT_SEQ(i) ((i) << 6)
-#define FC_FC_ABT_SEQ(i) ((i) << 4)
-#define FC_FC_REL_OFF (1 << 3) /* parameter is relative offset */
-#define FC_FC_RES2 (1 << 2) /* reserved */
-#define FC_FC_FILL(i) ((i) & 3) /* 1:0: bytes of trailing fill */
-
-/*
- * BA_ACC payload.
- */
-struct fc_ba_acc {
- __u8 ba_seq_id_val; /* SEQ_ID validity */
-#define FC_BA_SEQ_ID_VAL 0x80
- __u8 ba_seq_id; /* SEQ_ID of seq last deliverable */
- __u8 ba_resvd[2]; /* reserved */
- __be16 ba_ox_id; /* OX_ID for aborted seq or exch */
- __be16 ba_rx_id; /* RX_ID for aborted seq or exch */
- __be16 ba_low_seq_cnt; /* low SEQ_CNT of aborted seq */
- __be16 ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */
-};
-
-/*
- * BA_RJT: Basic Reject payload.
- */
-struct fc_ba_rjt {
- __u8 br_resvd; /* reserved */
- __u8 br_reason; /* reason code */
- __u8 br_explan; /* reason explanation */
- __u8 br_vendor; /* vendor unique code */
-};
-
-/*
- * BA_RJT reason codes.
- * From FS-2.
- */
-enum fc_ba_rjt_reason {
- FC_BA_RJT_NONE = 0, /* in software this means no reject */
- FC_BA_RJT_INVL_CMD = 0x01, /* invalid command code */
- FC_BA_RJT_LOG_ERR = 0x03, /* logical error */
- FC_BA_RJT_LOG_BUSY = 0x05, /* logical busy */
- FC_BA_RJT_PROTO_ERR = 0x07, /* protocol error */
- FC_BA_RJT_UNABLE = 0x09, /* unable to perform request */
- FC_BA_RJT_VENDOR = 0xff, /* vendor-specific (see br_vendor) */
-};
-
-/*
- * BA_RJT reason code explanations.
- */
-enum fc_ba_rjt_explan {
- FC_BA_RJT_EXP_NONE = 0x00, /* no additional expanation */
- FC_BA_RJT_INV_XID = 0x03, /* invalid OX_ID-RX_ID combination */
- FC_BA_RJT_ABT = 0x05, /* sequence aborted, no seq info */
-};
-
-/*
- * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field.
- */
-struct fc_pf_rjt {
- __u8 rj_action; /* reserved */
- __u8 rj_reason; /* reason code */
- __u8 rj_resvd; /* reserved */
- __u8 rj_vendor; /* vendor unique code */
-};
-
-/*
- * P_RJT and F_RJT reject reason codes.
- */
-enum fc_pf_rjt_reason {
- FC_RJT_NONE = 0, /* non-reject (reserved by standard) */
- FC_RJT_INVL_DID = 0x01, /* invalid destination ID */
- FC_RJT_INVL_SID = 0x02, /* invalid source ID */
- FC_RJT_P_UNAV_T = 0x03, /* port unavailable, temporary */
- FC_RJT_P_UNAV = 0x04, /* port unavailable, permanent */
- FC_RJT_CLS_UNSUP = 0x05, /* class not supported */
- FC_RJT_DEL_USAGE = 0x06, /* delimiter usage error */
- FC_RJT_TYPE_UNSUP = 0x07, /* type not supported */
- FC_RJT_LINK_CTL = 0x08, /* invalid link control */
- FC_RJT_R_CTL = 0x09, /* invalid R_CTL field */
- FC_RJT_F_CTL = 0x0a, /* invalid F_CTL field */
- FC_RJT_OX_ID = 0x0b, /* invalid originator exchange ID */
- FC_RJT_RX_ID = 0x0c, /* invalid responder exchange ID */
- FC_RJT_SEQ_ID = 0x0d, /* invalid sequence ID */
- FC_RJT_DF_CTL = 0x0e, /* invalid DF_CTL field */
- FC_RJT_SEQ_CNT = 0x0f, /* invalid SEQ_CNT field */
- FC_RJT_PARAM = 0x10, /* invalid parameter field */
- FC_RJT_EXCH_ERR = 0x11, /* exchange error */
- FC_RJT_PROTO = 0x12, /* protocol error */
- FC_RJT_LEN = 0x13, /* incorrect length */
- FC_RJT_UNEXP_ACK = 0x14, /* unexpected ACK */
- FC_RJT_FAB_CLASS = 0x15, /* class unsupported by fabric entity */
- FC_RJT_LOGI_REQ = 0x16, /* login required */
- FC_RJT_SEQ_XS = 0x17, /* excessive sequences attempted */
- FC_RJT_EXCH_EST = 0x18, /* unable to establish exchange */
- FC_RJT_FAB_UNAV = 0x1a, /* fabric unavailable */
- FC_RJT_VC_ID = 0x1b, /* invalid VC_ID (class 4) */
- FC_RJT_CS_CTL = 0x1c, /* invalid CS_CTL field */
- FC_RJT_INSUF_RES = 0x1d, /* insuff. resources for VC (Class 4) */
- FC_RJT_INVL_CLS = 0x1f, /* invalid class of service */
- FC_RJT_PREEMT_RJT = 0x20, /* preemption request rejected */
- FC_RJT_PREEMT_DIS = 0x21, /* preemption not enabled */
- FC_RJT_MCAST_ERR = 0x22, /* multicast error */
- FC_RJT_MCAST_ET = 0x23, /* multicast error terminate */
- FC_RJT_PRLI_REQ = 0x24, /* process login required */
- FC_RJT_INVL_ATT = 0x25, /* invalid attachment */
- FC_RJT_VENDOR = 0xff, /* vendor specific reject */
-};
-
-/* default timeout values */
-
-#define FC_DEF_E_D_TOV 2000UL
-#define FC_DEF_R_A_TOV 10000UL
-
-#endif /* _FC_FS_H_ */
diff --git a/include/scsi/fc/fc_gs.h b/include/scsi/fc/fc_gs.h
deleted file mode 100644
index a37346d..0000000
--- a/include/scsi/fc/fc_gs.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright(c) 2007 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Maintained at www.Open-FCoE.org
- */
-
-#ifndef _FC_GS_H_
-#define _FC_GS_H_
-
-#include <linux/types.h>
-
-/*
- * Fibre Channel Services - Common Transport.
- * From T11.org FC-GS-2 Rev 5.3 November 1998.
- */
-
-struct fc_ct_hdr {
- __u8 ct_rev; /* revision */
- __u8 ct_in_id[3]; /* N_Port ID of original requestor */
- __u8 ct_fs_type; /* type of fibre channel service */
- __u8 ct_fs_subtype; /* subtype */
- __u8 ct_options;
- __u8 _ct_resvd1;
- __be16 ct_cmd; /* command / response code */
- __be16 ct_mr_size; /* maximum / residual size */
- __u8 _ct_resvd2;
- __u8 ct_reason; /* reject reason */
- __u8 ct_explan; /* reason code explanation */
- __u8 ct_vendor; /* vendor unique data */
-};
-
-#define FC_CT_HDR_LEN 16 /* expected sizeof (struct fc_ct_hdr) */
-
-enum fc_ct_rev {
- FC_CT_REV = 1 /* common transport revision */
-};
-
-/*
- * ct_fs_type values.
- */
-enum fc_ct_fs_type {
- FC_FST_ALIAS = 0xf8, /* alias service */
- FC_FST_MGMT = 0xfa, /* management service */
- FC_FST_TIME = 0xfb, /* time service */
- FC_FST_DIR = 0xfc, /* directory service */
-};
-
-/*
- * ct_cmd: Command / response codes
- */
-enum fc_ct_cmd {
- FC_FS_RJT = 0x8001, /* reject */
- FC_FS_ACC = 0x8002, /* accept */
-};
-
-/*
- * FS_RJT reason codes.
- */
-enum fc_ct_reason {
- FC_FS_RJT_CMD = 0x01, /* invalid command code */
- FC_FS_RJT_VER = 0x02, /* invalid version level */
- FC_FS_RJT_LOG = 0x03, /* logical error */
- FC_FS_RJT_IUSIZ = 0x04, /* invalid IU size */
- FC_FS_RJT_BSY = 0x05, /* logical busy */
- FC_FS_RJT_PROTO = 0x07, /* protocol error */
- FC_FS_RJT_UNABL = 0x09, /* unable to perform command request */
- FC_FS_RJT_UNSUP = 0x0b, /* command not supported */
-};
-
-/*
- * FS_RJT reason code explanations.
- */
-enum fc_ct_explan {
- FC_FS_EXP_NONE = 0x00, /* no additional explanation */
- FC_FS_EXP_PID = 0x01, /* port ID not registered */
- FC_FS_EXP_PNAM = 0x02, /* port name not registered */
- FC_FS_EXP_NNAM = 0x03, /* node name not registered */
- FC_FS_EXP_COS = 0x04, /* class of service not registered */
- FC_FS_EXP_FTNR = 0x07, /* FC-4 types not registered */
- /* definitions not complete */
-};
-
-#endif /* _FC_GS_H_ */
diff --git a/include/scsi/fc/fc_ns.h b/include/scsi/fc/fc_ns.h
deleted file mode 100644
index f7751d5..0000000
--- a/include/scsi/fc/fc_ns.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Copyright(c) 2007 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Maintained at www.Open-FCoE.org
- */
-
-#ifndef _FC_NS_H_
-#define _FC_NS_H_
-
-#include <linux/types.h>
-
-/*
- * Fibre Channel Services - Name Service (dNS)
- * From T11.org FC-GS-2 Rev 5.3 November 1998.
- */
-
-/*
- * Common-transport sub-type for Name Server.
- */
-#define FC_NS_SUBTYPE 2 /* fs_ct_hdr.ct_fs_subtype */
-
-/*
- * Name server Requests.
- * Note: this is an incomplete list, some unused requests are omitted.
- */
-enum fc_ns_req {
- FC_NS_GA_NXT = 0x0100, /* get all next */
- FC_NS_GI_A = 0x0101, /* get identifiers - scope */
- FC_NS_GPN_ID = 0x0112, /* get port name by ID */
- FC_NS_GNN_ID = 0x0113, /* get node name by ID */
- FC_NS_GSPN_ID = 0x0118, /* get symbolic port name */
- FC_NS_GID_PN = 0x0121, /* get ID for port name */
- FC_NS_GID_NN = 0x0131, /* get IDs for node name */
- FC_NS_GID_FT = 0x0171, /* get IDs by FC4 type */
- FC_NS_GPN_FT = 0x0172, /* get port names by FC4 type */
- FC_NS_GID_PT = 0x01a1, /* get IDs by port type */
- FC_NS_RPN_ID = 0x0212, /* reg port name for ID */
- FC_NS_RNN_ID = 0x0213, /* reg node name for ID */
- FC_NS_RFT_ID = 0x0217, /* reg FC4 type for ID */
- FC_NS_RSPN_ID = 0x0218, /* reg symbolic port name */
- FC_NS_RFF_ID = 0x021f, /* reg FC4 Features for ID */
- FC_NS_RSNN_NN = 0x0239, /* reg symbolic node name */
-};
-
-/*
- * Port type values.
- */
-enum fc_ns_pt {
- FC_NS_UNID_PORT = 0x00, /* unidentified */
- FC_NS_N_PORT = 0x01, /* N port */
- FC_NS_NL_PORT = 0x02, /* NL port */
- FC_NS_FNL_PORT = 0x03, /* F/NL port */
- FC_NS_NX_PORT = 0x7f, /* Nx port */
- FC_NS_F_PORT = 0x81, /* F port */
- FC_NS_FL_PORT = 0x82, /* FL port */
- FC_NS_E_PORT = 0x84, /* E port */
- FC_NS_B_PORT = 0x85, /* B port */
-};
-
-/*
- * Port type object.
- */
-struct fc_ns_pt_obj {
- __u8 pt_type;
-};
-
-/*
- * Port ID object
- */
-struct fc_ns_fid {
- __u8 fp_flags; /* flags for responses only */
- __u8 fp_fid[3];
-};
-
-/*
- * fp_flags in port ID object, for responses only.
- */
-#define FC_NS_FID_LAST 0x80 /* last object */
-
-/*
- * FC4-types object.
- */
-#define FC_NS_TYPES 256 /* number of possible FC-4 types */
-#define FC_NS_BPW 32 /* bits per word in bitmap */
-
-struct fc_ns_fts {
- __be32 ff_type_map[FC_NS_TYPES / FC_NS_BPW]; /* bitmap of FC-4 types */
-};
-
-/*
- * FC4-features object.
- */
-struct fc_ns_ff {
- __be32 fd_feat[FC_NS_TYPES * 4 / FC_NS_BPW]; /* 4-bits per FC-type */
-};
-
-/*
- * GID_PT request.
- */
-struct fc_ns_gid_pt {
- __u8 fn_pt_type;
- __u8 fn_domain_id_scope;
- __u8 fn_area_id_scope;
- __u8 fn_resvd;
-};
-
-/*
- * GID_FT or GPN_FT request.
- */
-struct fc_ns_gid_ft {
- __u8 fn_resvd;
- __u8 fn_domain_id_scope;
- __u8 fn_area_id_scope;
- __u8 fn_fc4_type;
-};
-
-/*
- * GPN_FT response.
- */
-struct fc_gpn_ft_resp {
- __u8 fp_flags; /* see fp_flags definitions above */
- __u8 fp_fid[3]; /* port ID */
- __be32 fp_resvd;
- __be64 fp_wwpn; /* port name */
-};
-
-/*
- * GID_PN request
- */
-struct fc_ns_gid_pn {
- __be64 fn_wwpn; /* port name */
-};
-
-/*
- * GID_PN response or GSPN_ID request
- */
-struct fc_gid_pn_resp {
- __u8 fp_resvd;
- __u8 fp_fid[3]; /* port ID */
-};
-
-/*
- * GSPN_ID response
- */
-struct fc_gspn_resp {
- __u8 fp_name_len;
- char fp_name[];
-};
-
-/*
- * RFT_ID request - register FC-4 types for ID.
- */
-struct fc_ns_rft_id {
- struct fc_ns_fid fr_fid; /* port ID object */
- struct fc_ns_fts fr_fts; /* FC-4 types object */
-};
-
-/*
- * RPN_ID request - register port name for ID.
- * RNN_ID request - register node name for ID.
- */
-struct fc_ns_rn_id {
- struct fc_ns_fid fr_fid; /* port ID object */
- __be64 fr_wwn; /* node name or port name */
-} __attribute__((__packed__));
-
-/*
- * RSNN_NN request - register symbolic node name
- */
-struct fc_ns_rsnn {
- __be64 fr_wwn; /* node name */
- __u8 fr_name_len;
- char fr_name[];
-} __attribute__((__packed__));
-
-/*
- * RSPN_ID request - register symbolic port name
- */
-struct fc_ns_rspn {
- struct fc_ns_fid fr_fid; /* port ID object */
- __u8 fr_name_len;
- char fr_name[];
-} __attribute__((__packed__));
-
-/*
- * RFF_ID request - register FC-4 Features for ID.
- */
-struct fc_ns_rff_id {
- struct fc_ns_fid fr_fid; /* port ID object */
- __u8 fr_resvd[2];
- __u8 fr_feat; /* FC-4 Feature bits */
- __u8 fr_type; /* FC-4 type */
-} __attribute__((__packed__));
-
-#endif /* _FC_NS_H_ */
diff --git a/include/scsi/fcoe_sysfs.h b/include/scsi/fcoe_sysfs.h
index 604cb9b..7e23148 100644
--- a/include/scsi/fcoe_sysfs.h
+++ b/include/scsi/fcoe_sysfs.h
@@ -34,7 +34,8 @@ struct fcoe_sysfs_function_template {
void (*get_fcoe_ctlr_symb_err)(struct fcoe_ctlr_device *);
void (*get_fcoe_ctlr_err_block)(struct fcoe_ctlr_device *);
void (*get_fcoe_ctlr_fcs_error)(struct fcoe_ctlr_device *);
- void (*get_fcoe_ctlr_mode)(struct fcoe_ctlr_device *);
+ void (*set_fcoe_ctlr_mode)(struct fcoe_ctlr_device *);
+ int (*set_fcoe_ctlr_enabled)(struct fcoe_ctlr_device *);
void (*get_fcoe_fcf_selected)(struct fcoe_fcf_device *);
void (*get_fcoe_fcf_vlan_id)(struct fcoe_fcf_device *);
};
@@ -48,6 +49,12 @@ enum fip_conn_type {
FIP_CONN_TYPE_VN2VN,
};
+enum ctlr_enabled_state {
+ FCOE_CTLR_ENABLED,
+ FCOE_CTLR_DISABLED,
+ FCOE_CTLR_UNUSED,
+};
+
struct fcoe_ctlr_device {
u32 id;
@@ -64,6 +71,8 @@ struct fcoe_ctlr_device {
int fcf_dev_loss_tmo;
enum fip_conn_type mode;
+ enum ctlr_enabled_state enabled;
+
/* expected in host order for displaying */
struct fcoe_fc_els_lesb lesb;
};
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index 8742d85..4427393 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -260,6 +260,9 @@ void __fcoe_get_lesb(struct fc_lport *lport, struct fc_els_lesb *fc_lesb,
struct net_device *netdev);
void fcoe_wwn_to_str(u64 wwn, char *buf, int len);
int fcoe_validate_vport_create(struct fc_vport *vport);
+int fcoe_link_speed_update(struct fc_lport *);
+void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *);
+void fcoe_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev);
/**
* is_fip_mode() - returns true if FIP mode selected.
@@ -289,8 +292,11 @@ static inline bool is_fip_mode(struct fcoe_ctlr *fip)
* @attached: whether this transport is already attached
* @list: list linkage to all attached transports
* @match: handler to allow the transport driver to match up a given netdev
+ * @alloc: handler to allocate per-instance FCoE structures
+ * (no discovery or login)
* @create: handler to sysfs entry of create for FCoE instances
- * @destroy: handler to sysfs entry of destroy for FCoE instances
+ * @destroy: handler to delete per-instance FCoE structures
+ * (frees all memory)
* @enable: handler to sysfs entry of enable for FCoE instances
* @disable: handler to sysfs entry of disable for FCoE instances
*/
@@ -299,6 +305,7 @@ struct fcoe_transport {
bool attached;
struct list_head list;
bool (*match) (struct net_device *device);
+ int (*alloc) (struct net_device *device);
int (*create) (struct net_device *device, enum fip_state fip_mode);
int (*destroy) (struct net_device *device);
int (*enable) (struct net_device *device);
@@ -347,7 +354,20 @@ struct fcoe_port {
struct timer_list timer;
struct work_struct destroy_work;
u8 data_src_addr[ETH_ALEN];
+ struct net_device * (*get_netdev)(const struct fc_lport *lport);
};
+
+/**
+ * fcoe_get_netdev() - Return the net device associated with a local port
+ * @lport: The local port to get the net device from
+ */
+static inline struct net_device *fcoe_get_netdev(const struct fc_lport *lport)
+{
+ struct fcoe_port *port = ((struct fcoe_port *)lport_priv(lport));
+
+ return (port->get_netdev) ? port->get_netdev(lport) : NULL;
+}
+
void fcoe_clean_pending_queue(struct fc_lport *);
void fcoe_check_wait_queue(struct fc_lport *lport, struct sk_buff *skb);
void fcoe_queue_timer(ulong lport);
@@ -356,7 +376,7 @@ int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen,
/* FCoE Sysfs helpers */
void fcoe_fcf_get_selected(struct fcoe_fcf_device *);
-void fcoe_ctlr_get_fip_mode(struct fcoe_ctlr_device *);
+void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *);
/**
* struct netdev_list
@@ -372,4 +392,12 @@ struct fcoe_netdev_mapping {
int fcoe_transport_attach(struct fcoe_transport *ft);
int fcoe_transport_detach(struct fcoe_transport *ft);
+/* sysfs store handler for ctrl_control interface */
+ssize_t fcoe_ctlr_create_store(struct bus_type *bus,
+ const char *buf, size_t count);
+ssize_t fcoe_ctlr_destroy_store(struct bus_type *bus,
+ const char *buf, size_t count);
+
#endif /* _LIBFCOE_H */
+
+
diff --git a/include/scsi/scsi_bsg_fc.h b/include/scsi/scsi_bsg_fc.h
deleted file mode 100644
index 3031b90..0000000
--- a/include/scsi/scsi_bsg_fc.h
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * FC Transport BSG Interface
- *
- * Copyright (C) 2008 James Smart, Emulex Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef SCSI_BSG_FC_H
-#define SCSI_BSG_FC_H
-
-/*
- * This file intended to be included by both kernel and user space
- */
-
-/*
- * FC Transport SGIO v4 BSG Message Support
- */
-
-/* Default BSG request timeout (in seconds) */
-#define FC_DEFAULT_BSG_TIMEOUT (10 * HZ)
-
-
-/*
- * Request Message Codes supported by the FC Transport
- */
-
-/* define the class masks for the message codes */
-#define FC_BSG_CLS_MASK 0xF0000000 /* find object class */
-#define FC_BSG_HST_MASK 0x80000000 /* fc host class */
-#define FC_BSG_RPT_MASK 0x40000000 /* fc rport class */
-
- /* fc_host Message Codes */
-#define FC_BSG_HST_ADD_RPORT (FC_BSG_HST_MASK | 0x00000001)
-#define FC_BSG_HST_DEL_RPORT (FC_BSG_HST_MASK | 0x00000002)
-#define FC_BSG_HST_ELS_NOLOGIN (FC_BSG_HST_MASK | 0x00000003)
-#define FC_BSG_HST_CT (FC_BSG_HST_MASK | 0x00000004)
-#define FC_BSG_HST_VENDOR (FC_BSG_HST_MASK | 0x000000FF)
-
- /* fc_rport Message Codes */
-#define FC_BSG_RPT_ELS (FC_BSG_RPT_MASK | 0x00000001)
-#define FC_BSG_RPT_CT (FC_BSG_RPT_MASK | 0x00000002)
-
-
-
-/*
- * FC Address Identifiers in Message Structures :
- *
- * Whenever a command payload contains a FC Address Identifier
- * (aka port_id), the value is effectively in big-endian
- * order, thus the array elements are decoded as follows:
- * element [0] is bits 23:16 of the FC Address Identifier
- * element [1] is bits 15:8 of the FC Address Identifier
- * element [2] is bits 7:0 of the FC Address Identifier
- */
-
-
-/*
- * FC Host Messages
- */
-
-/* FC_BSG_HST_ADDR_PORT : */
-
-/* Request:
- * This message requests the FC host to login to the remote port
- * at the specified N_Port_Id. The remote port is to be enumerated
- * with the transport upon completion of the login.
- */
-struct fc_bsg_host_add_rport {
- uint8_t reserved;
-
- /* FC Address Identier of the remote port to login to */
- uint8_t port_id[3];
-};
-
-/* Response:
- * There is no additional response data - fc_bsg_reply->result is sufficient
- */
-
-
-/* FC_BSG_HST_DEL_RPORT : */
-
-/* Request:
- * This message requests the FC host to remove an enumerated
- * remote port and to terminate the login to it.
- *
- * Note: The driver is free to reject this request if it desires to
- * remain logged in with the remote port.
- */
-struct fc_bsg_host_del_rport {
- uint8_t reserved;
-
- /* FC Address Identier of the remote port to logout of */
- uint8_t port_id[3];
-};
-
-/* Response:
- * There is no additional response data - fc_bsg_reply->result is sufficient
- */
-
-
-/* FC_BSG_HST_ELS_NOLOGIN : */
-
-/* Request:
- * This message requests the FC_Host to send an ELS to a specific
- * N_Port_ID. The host does not need to log into the remote port,
- * nor does it need to enumerate the rport for further traffic
- * (although, the FC host is free to do so if it desires).
- */
-struct fc_bsg_host_els {
- /*
- * ELS Command Code being sent (must be the same as byte 0
- * of the payload)
- */
- uint8_t command_code;
-
- /* FC Address Identier of the remote port to send the ELS to */
- uint8_t port_id[3];
-};
-
-/* Response:
- */
-/* fc_bsg_ctels_reply->status values */
-#define FC_CTELS_STATUS_OK 0x00000000
-#define FC_CTELS_STATUS_REJECT 0x00000001
-#define FC_CTELS_STATUS_P_RJT 0x00000002
-#define FC_CTELS_STATUS_F_RJT 0x00000003
-#define FC_CTELS_STATUS_P_BSY 0x00000004
-#define FC_CTELS_STATUS_F_BSY 0x00000006
-struct fc_bsg_ctels_reply {
- /*
- * Note: An ELS LS_RJT may be reported in 2 ways:
- * a) A status of FC_CTELS_STATUS_OK is returned. The caller
- * is to look into the ELS receive payload to determine
- * LS_ACC or LS_RJT (by contents of word 0). The reject
- * data will be in word 1.
- * b) A status of FC_CTELS_STATUS_REJECT is returned, The
- * rjt_data field will contain valid data.
- *
- * Note: ELS LS_ACC is determined by an FC_CTELS_STATUS_OK, and
- * the receive payload word 0 indicates LS_ACC
- * (e.g. value is 0x02xxxxxx).
- *
- * Note: Similarly, a CT Reject may be reported in 2 ways:
- * a) A status of FC_CTELS_STATUS_OK is returned. The caller
- * is to look into the CT receive payload to determine
- * Accept or Reject (by contents of word 2). The reject
- * data will be in word 3.
- * b) A status of FC_CTELS_STATUS_REJECT is returned, The
- * rjt_data field will contain valid data.
- *
- * Note: x_RJT/BSY status will indicae that the rjt_data field
- * is valid and contains the reason/explanation values.
- */
- uint32_t status; /* See FC_CTELS_STATUS_xxx */
-
- /* valid if status is not FC_CTELS_STATUS_OK */
- struct {
- uint8_t action; /* fragment_id for CT REJECT */
- uint8_t reason_code;
- uint8_t reason_explanation;
- uint8_t vendor_unique;
- } rjt_data;
-};
-
-
-/* FC_BSG_HST_CT : */
-
-/* Request:
- * This message requests that a CT Request be performed with the
- * indicated N_Port_ID. The driver is responsible for logging in with
- * the fabric and/or N_Port_ID, etc as per FC rules. This request does
- * not mandate that the driver must enumerate the destination in the
- * transport. The driver is allowed to decide whether to enumerate it,
- * and whether to tear it down after the request.
- */
-struct fc_bsg_host_ct {
- uint8_t reserved;
-
- /* FC Address Identier of the remote port to send the ELS to */
- uint8_t port_id[3];
-
- /*
- * We need words 0-2 of the generic preamble for the LLD's
- */
- uint32_t preamble_word0; /* revision & IN_ID */
- uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */
- uint32_t preamble_word2; /* Cmd Code, Max Size */
-
-};
-/* Response:
- *
- * The reply structure is an fc_bsg_ctels_reply structure
- */
-
-
-/* FC_BSG_HST_VENDOR : */
-
-/* Request:
- * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
- * formatting requirements specified in scsi_netlink.h
- */
-struct fc_bsg_host_vendor {
- /*
- * Identifies the vendor that the message is formatted for. This
- * should be the recipient of the message.
- */
- uint64_t vendor_id;
-
- /* start of vendor command area */
- uint32_t vendor_cmd[0];
-};
-
-/* Response:
- */
-struct fc_bsg_host_vendor_reply {
- /* start of vendor response area */
- uint32_t vendor_rsp[0];
-};
-
-
-
-/*
- * FC Remote Port Messages
- */
-
-/* FC_BSG_RPT_ELS : */
-
-/* Request:
- * This message requests that an ELS be performed with the rport.
- */
-struct fc_bsg_rport_els {
- /*
- * ELS Command Code being sent (must be the same as
- * byte 0 of the payload)
- */
- uint8_t els_code;
-};
-
-/* Response:
- *
- * The reply structure is an fc_bsg_ctels_reply structure
- */
-
-
-/* FC_BSG_RPT_CT : */
-
-/* Request:
- * This message requests that a CT Request be performed with the rport.
- */
-struct fc_bsg_rport_ct {
- /*
- * We need words 0-2 of the generic preamble for the LLD's
- */
- uint32_t preamble_word0; /* revision & IN_ID */
- uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */
- uint32_t preamble_word2; /* Cmd Code, Max Size */
-};
-/* Response:
- *
- * The reply structure is an fc_bsg_ctels_reply structure
- */
-
-
-
-
-/* request (CDB) structure of the sg_io_v4 */
-struct fc_bsg_request {
- uint32_t msgcode;
- union {
- struct fc_bsg_host_add_rport h_addrport;
- struct fc_bsg_host_del_rport h_delrport;
- struct fc_bsg_host_els h_els;
- struct fc_bsg_host_ct h_ct;
- struct fc_bsg_host_vendor h_vendor;
-
- struct fc_bsg_rport_els r_els;
- struct fc_bsg_rport_ct r_ct;
- } rqst_data;
-} __attribute__((packed));
-
-
-/* response (request sense data) structure of the sg_io_v4 */
-struct fc_bsg_reply {
- /*
- * The completion result. Result exists in two forms:
- * if negative, it is an -Exxx system errno value. There will
- * be no further reply information supplied.
- * else, it's the 4-byte scsi error result, with driver, host,
- * msg and status fields. The per-msgcode reply structure
- * will contain valid data.
- */
- uint32_t result;
-
- /* If there was reply_payload, how much was recevied ? */
- uint32_t reply_payload_rcv_len;
-
- union {
- struct fc_bsg_host_vendor_reply vendor_reply;
-
- struct fc_bsg_ctels_reply ctels_reply;
- } reply_data;
-};
-
-
-#endif /* SCSI_BSG_FC_H */
-
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 4908480..2b6956e 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -873,7 +873,7 @@ static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsign
SHOST_DIF_TYPE2_PROTECTION,
SHOST_DIF_TYPE3_PROTECTION };
- if (target_type > SHOST_DIF_TYPE3_PROTECTION)
+ if (target_type >= ARRAY_SIZE(cap))
return 0;
return shost->prot_capabilities & cap[target_type] ? target_type : 0;
@@ -887,7 +887,7 @@ static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsign
SHOST_DIX_TYPE2_PROTECTION,
SHOST_DIX_TYPE3_PROTECTION };
- if (target_type > SHOST_DIX_TYPE3_PROTECTION)
+ if (target_type >= ARRAY_SIZE(cap))
return 0;
return shost->prot_capabilities & cap[target_type];
diff --git a/include/scsi/scsi_netlink.h b/include/scsi/scsi_netlink.h
deleted file mode 100644
index 62b4eda..0000000
--- a/include/scsi/scsi_netlink.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * SCSI Transport Netlink Interface
- * Used for the posting of outbound SCSI transport events
- *
- * Copyright (C) 2006 James Smart, Emulex Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef SCSI_NETLINK_H
-#define SCSI_NETLINK_H
-
-#include <linux/netlink.h>
-#include <linux/types.h>
-
-/*
- * This file intended to be included by both kernel and user space
- */
-
-/* Single Netlink Message type to send all SCSI Transport messages */
-#define SCSI_TRANSPORT_MSG NLMSG_MIN_TYPE + 1
-
-/* SCSI Transport Broadcast Groups */
- /* leaving groups 0 and 1 unassigned */
-#define SCSI_NL_GRP_FC_EVENTS (1<<2) /* Group 2 */
-#define SCSI_NL_GRP_CNT 3
-
-
-/* SCSI_TRANSPORT_MSG event message header */
-struct scsi_nl_hdr {
- uint8_t version;
- uint8_t transport;
- uint16_t magic;
- uint16_t msgtype;
- uint16_t msglen;
-} __attribute__((aligned(sizeof(uint64_t))));
-
-/* scsi_nl_hdr->version value */
-#define SCSI_NL_VERSION 1
-
-/* scsi_nl_hdr->magic value */
-#define SCSI_NL_MAGIC 0xA1B2
-
-/* scsi_nl_hdr->transport value */
-#define SCSI_NL_TRANSPORT 0
-#define SCSI_NL_TRANSPORT_FC 1
-#define SCSI_NL_MAX_TRANSPORTS 2
-
-/* Transport-based scsi_nl_hdr->msgtype values are defined in each transport */
-
-/*
- * GENERIC SCSI scsi_nl_hdr->msgtype Values
- */
- /* kernel -> user */
-#define SCSI_NL_SHOST_VENDOR 0x0001
- /* user -> kernel */
-/* SCSI_NL_SHOST_VENDOR msgtype is kernel->user and user->kernel */
-
-
-/*
- * Message Structures :
- */
-
-/* macro to round up message lengths to 8byte boundary */
-#define SCSI_NL_MSGALIGN(len) (((len) + 7) & ~7)
-
-
-/*
- * SCSI HOST Vendor Unique messages :
- * SCSI_NL_SHOST_VENDOR
- *
- * Note: The Vendor Unique message payload will begin directly after
- * this structure, with the length of the payload per vmsg_datalen.
- *
- * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
- * formatting requirements specified below
- */
-struct scsi_nl_host_vendor_msg {
- struct scsi_nl_hdr snlh; /* must be 1st element ! */
- uint64_t vendor_id;
- uint16_t host_no;
- uint16_t vmsg_datalen;
-} __attribute__((aligned(sizeof(uint64_t))));
-
-
-/*
- * Vendor ID:
- * If transports post vendor-unique events, they must pass a well-known
- * 32-bit vendor identifier. This identifier consists of 8 bits indicating
- * the "type" of identifier contained, and 24 bits of id data.
- *
- * Identifiers for each type:
- * PCI : ID data is the 16 bit PCI Registered Vendor ID
- */
-#define SCSI_NL_VID_TYPE_SHIFT 56
-#define SCSI_NL_VID_TYPE_MASK ((__u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
-#define SCSI_NL_VID_TYPE_PCI ((__u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
-#define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK)
-
-
-#define INIT_SCSI_NL_HDR(hdr, t, mtype, mlen) \
- { \
- (hdr)->version = SCSI_NL_VERSION; \
- (hdr)->transport = t; \
- (hdr)->magic = SCSI_NL_MAGIC; \
- (hdr)->msgtype = mtype; \
- (hdr)->msglen = mlen; \
- }
-
-#endif /* SCSI_NETLINK_H */
-
diff --git a/include/scsi/scsi_netlink_fc.h b/include/scsi/scsi_netlink_fc.h
deleted file mode 100644
index cbf76e4..0000000
--- a/include/scsi/scsi_netlink_fc.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * FC Transport Netlink Interface
- *
- * Copyright (C) 2006 James Smart, Emulex Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef SCSI_NETLINK_FC_H
-#define SCSI_NETLINK_FC_H
-
-#include <scsi/scsi_netlink.h>
-
-/*
- * This file intended to be included by both kernel and user space
- */
-
-/*
- * FC Transport Message Types
- */
- /* kernel -> user */
-#define FC_NL_ASYNC_EVENT 0x0100
- /* user -> kernel */
-/* none */
-
-
-/*
- * Message Structures :
- */
-
-/* macro to round up message lengths to 8byte boundary */
-#define FC_NL_MSGALIGN(len) (((len) + 7) & ~7)
-
-
-/*
- * FC Transport Broadcast Event Message :
- * FC_NL_ASYNC_EVENT
- *
- * Note: if Vendor Unique message, &event_data will be start of
- * vendor unique payload, and the length of the payload is
- * per event_datalen
- *
- * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
- * formatting requirements specified in scsi_netlink.h
- */
-struct fc_nl_event {
- struct scsi_nl_hdr snlh; /* must be 1st element ! */
- uint64_t seconds;
- uint64_t vendor_id;
- uint16_t host_no;
- uint16_t event_datalen;
- uint32_t event_num;
- uint32_t event_code;
- uint32_t event_data;
-} __attribute__((aligned(sizeof(uint64_t))));
-
-
-#endif /* SCSI_NETLINK_FC_H */
-
diff --git a/include/uapi/scsi/Kbuild b/include/uapi/scsi/Kbuild
index 29a87dd..75746d5 100644
--- a/include/uapi/scsi/Kbuild
+++ b/include/uapi/scsi/Kbuild
@@ -1,2 +1,5 @@
# UAPI Header export list
header-y += fc/
+header-y += scsi_bsg_fc.h
+header-y += scsi_netlink.h
+header-y += scsi_netlink_fc.h
diff --git a/include/uapi/scsi/fc/Kbuild b/include/uapi/scsi/fc/Kbuild
index aafaa5a..5ead9fa 100644
--- a/include/uapi/scsi/fc/Kbuild
+++ b/include/uapi/scsi/fc/Kbuild
@@ -1 +1,5 @@
# UAPI Header export list
+header-y += fc_els.h
+header-y += fc_fs.h
+header-y += fc_gs.h
+header-y += fc_ns.h
diff --git a/include/uapi/scsi/fc/fc_els.h b/include/uapi/scsi/fc/fc_els.h
new file mode 100644
index 0000000..481abbd
--- /dev/null
+++ b/include/uapi/scsi/fc/fc_els.h
@@ -0,0 +1,831 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_ELS_H_
+#define _FC_ELS_H_
+
+#include <linux/types.h>
+
+/*
+ * Fibre Channel Switch - Enhanced Link Services definitions.
+ * From T11 FC-LS Rev 1.2 June 7, 2005.
+ */
+
+/*
+ * ELS Command codes - byte 0 of the frame payload
+ */
+enum fc_els_cmd {
+ ELS_LS_RJT = 0x01, /* ESL reject */
+ ELS_LS_ACC = 0x02, /* ESL Accept */
+ ELS_PLOGI = 0x03, /* N_Port login */
+ ELS_FLOGI = 0x04, /* F_Port login */
+ ELS_LOGO = 0x05, /* Logout */
+ ELS_ABTX = 0x06, /* Abort exchange - obsolete */
+ ELS_RCS = 0x07, /* read connection status */
+ ELS_RES = 0x08, /* read exchange status block */
+ ELS_RSS = 0x09, /* read sequence status block */
+ ELS_RSI = 0x0a, /* read sequence initiative */
+ ELS_ESTS = 0x0b, /* establish streaming */
+ ELS_ESTC = 0x0c, /* estimate credit */
+ ELS_ADVC = 0x0d, /* advise credit */
+ ELS_RTV = 0x0e, /* read timeout value */
+ ELS_RLS = 0x0f, /* read link error status block */
+ ELS_ECHO = 0x10, /* echo */
+ ELS_TEST = 0x11, /* test */
+ ELS_RRQ = 0x12, /* reinstate recovery qualifier */
+ ELS_REC = 0x13, /* read exchange concise */
+ ELS_SRR = 0x14, /* sequence retransmission request */
+ ELS_PRLI = 0x20, /* process login */
+ ELS_PRLO = 0x21, /* process logout */
+ ELS_SCN = 0x22, /* state change notification */
+ ELS_TPLS = 0x23, /* test process login state */
+ ELS_TPRLO = 0x24, /* third party process logout */
+ ELS_LCLM = 0x25, /* login control list mgmt (obs) */
+ ELS_GAID = 0x30, /* get alias_ID */
+ ELS_FACT = 0x31, /* fabric activate alias_id */
+ ELS_FDACDT = 0x32, /* fabric deactivate alias_id */
+ ELS_NACT = 0x33, /* N-port activate alias_id */
+ ELS_NDACT = 0x34, /* N-port deactivate alias_id */
+ ELS_QOSR = 0x40, /* quality of service request */
+ ELS_RVCS = 0x41, /* read virtual circuit status */
+ ELS_PDISC = 0x50, /* discover N_port service params */
+ ELS_FDISC = 0x51, /* discover F_port service params */
+ ELS_ADISC = 0x52, /* discover address */
+ ELS_RNC = 0x53, /* report node cap (obs) */
+ ELS_FARP_REQ = 0x54, /* FC ARP request */
+ ELS_FARP_REPL = 0x55, /* FC ARP reply */
+ ELS_RPS = 0x56, /* read port status block */
+ ELS_RPL = 0x57, /* read port list */
+ ELS_RPBC = 0x58, /* read port buffer condition */
+ ELS_FAN = 0x60, /* fabric address notification */
+ ELS_RSCN = 0x61, /* registered state change notification */
+ ELS_SCR = 0x62, /* state change registration */
+ ELS_RNFT = 0x63, /* report node FC-4 types */
+ ELS_CSR = 0x68, /* clock synch. request */
+ ELS_CSU = 0x69, /* clock synch. update */
+ ELS_LINIT = 0x70, /* loop initialize */
+ ELS_LSTS = 0x72, /* loop status */
+ ELS_RNID = 0x78, /* request node ID data */
+ ELS_RLIR = 0x79, /* registered link incident report */
+ ELS_LIRR = 0x7a, /* link incident record registration */
+ ELS_SRL = 0x7b, /* scan remote loop */
+ ELS_SBRP = 0x7c, /* set bit-error reporting params */
+ ELS_RPSC = 0x7d, /* report speed capabilities */
+ ELS_QSA = 0x7e, /* query security attributes */
+ ELS_EVFP = 0x7f, /* exchange virt. fabrics params */
+ ELS_LKA = 0x80, /* link keep-alive */
+ ELS_AUTH_ELS = 0x90, /* authentication ELS */
+};
+
+/*
+ * Initializer useful for decoding table.
+ * Please keep this in sync with the above definitions.
+ */
+#define FC_ELS_CMDS_INIT { \
+ [ELS_LS_RJT] = "LS_RJT", \
+ [ELS_LS_ACC] = "LS_ACC", \
+ [ELS_PLOGI] = "PLOGI", \
+ [ELS_FLOGI] = "FLOGI", \
+ [ELS_LOGO] = "LOGO", \
+ [ELS_ABTX] = "ABTX", \
+ [ELS_RCS] = "RCS", \
+ [ELS_RES] = "RES", \
+ [ELS_RSS] = "RSS", \
+ [ELS_RSI] = "RSI", \
+ [ELS_ESTS] = "ESTS", \
+ [ELS_ESTC] = "ESTC", \
+ [ELS_ADVC] = "ADVC", \
+ [ELS_RTV] = "RTV", \
+ [ELS_RLS] = "RLS", \
+ [ELS_ECHO] = "ECHO", \
+ [ELS_TEST] = "TEST", \
+ [ELS_RRQ] = "RRQ", \
+ [ELS_REC] = "REC", \
+ [ELS_SRR] = "SRR", \
+ [ELS_PRLI] = "PRLI", \
+ [ELS_PRLO] = "PRLO", \
+ [ELS_SCN] = "SCN", \
+ [ELS_TPLS] = "TPLS", \
+ [ELS_TPRLO] = "TPRLO", \
+ [ELS_LCLM] = "LCLM", \
+ [ELS_GAID] = "GAID", \
+ [ELS_FACT] = "FACT", \
+ [ELS_FDACDT] = "FDACDT", \
+ [ELS_NACT] = "NACT", \
+ [ELS_NDACT] = "NDACT", \
+ [ELS_QOSR] = "QOSR", \
+ [ELS_RVCS] = "RVCS", \
+ [ELS_PDISC] = "PDISC", \
+ [ELS_FDISC] = "FDISC", \
+ [ELS_ADISC] = "ADISC", \
+ [ELS_RNC] = "RNC", \
+ [ELS_FARP_REQ] = "FARP_REQ", \
+ [ELS_FARP_REPL] = "FARP_REPL", \
+ [ELS_RPS] = "RPS", \
+ [ELS_RPL] = "RPL", \
+ [ELS_RPBC] = "RPBC", \
+ [ELS_FAN] = "FAN", \
+ [ELS_RSCN] = "RSCN", \
+ [ELS_SCR] = "SCR", \
+ [ELS_RNFT] = "RNFT", \
+ [ELS_CSR] = "CSR", \
+ [ELS_CSU] = "CSU", \
+ [ELS_LINIT] = "LINIT", \
+ [ELS_LSTS] = "LSTS", \
+ [ELS_RNID] = "RNID", \
+ [ELS_RLIR] = "RLIR", \
+ [ELS_LIRR] = "LIRR", \
+ [ELS_SRL] = "SRL", \
+ [ELS_SBRP] = "SBRP", \
+ [ELS_RPSC] = "RPSC", \
+ [ELS_QSA] = "QSA", \
+ [ELS_EVFP] = "EVFP", \
+ [ELS_LKA] = "LKA", \
+ [ELS_AUTH_ELS] = "AUTH_ELS", \
+}
+
+/*
+ * LS_ACC payload.
+ */
+struct fc_els_ls_acc {
+ __u8 la_cmd; /* command code ELS_LS_ACC */
+ __u8 la_resv[3]; /* reserved */
+};
+
+/*
+ * ELS reject payload.
+ */
+struct fc_els_ls_rjt {
+ __u8 er_cmd; /* command code ELS_LS_RJT */
+ __u8 er_resv[4]; /* reserved must be zero */
+ __u8 er_reason; /* reason (enum fc_els_rjt_reason below) */
+ __u8 er_explan; /* explanation (enum fc_els_rjt_explan below) */
+ __u8 er_vendor; /* vendor specific code */
+};
+
+/*
+ * ELS reject reason codes (er_reason).
+ */
+enum fc_els_rjt_reason {
+ ELS_RJT_NONE = 0, /* no reject - not to be sent */
+ ELS_RJT_INVAL = 0x01, /* invalid ELS command code */
+ ELS_RJT_LOGIC = 0x03, /* logical error */
+ ELS_RJT_BUSY = 0x05, /* logical busy */
+ ELS_RJT_PROT = 0x07, /* protocol error */
+ ELS_RJT_UNAB = 0x09, /* unable to perform command request */
+ ELS_RJT_UNSUP = 0x0b, /* command not supported */
+ ELS_RJT_INPROG = 0x0e, /* command already in progress */
+ ELS_RJT_FIP = 0x20, /* FIP error */
+ ELS_RJT_VENDOR = 0xff, /* vendor specific error */
+};
+
+
+/*
+ * reason code explanation (er_explan).
+ */
+enum fc_els_rjt_explan {
+ ELS_EXPL_NONE = 0x00, /* No additional explanation */
+ ELS_EXPL_SPP_OPT_ERR = 0x01, /* service parameter error - options */
+ ELS_EXPL_SPP_ICTL_ERR = 0x03, /* service parm error - initiator ctl */
+ ELS_EXPL_AH = 0x11, /* invalid association header */
+ ELS_EXPL_AH_REQ = 0x13, /* association_header required */
+ ELS_EXPL_SID = 0x15, /* invalid originator S_ID */
+ ELS_EXPL_OXID_RXID = 0x17, /* invalid OX_ID-RX_ID combination */
+ ELS_EXPL_INPROG = 0x19, /* Request already in progress */
+ ELS_EXPL_PLOGI_REQD = 0x1e, /* N_Port login required */
+ ELS_EXPL_INSUF_RES = 0x29, /* insufficient resources */
+ ELS_EXPL_UNAB_DATA = 0x2a, /* unable to supply requested data */
+ ELS_EXPL_UNSUPR = 0x2c, /* Request not supported */
+ ELS_EXPL_INV_LEN = 0x2d, /* Invalid payload length */
+ ELS_EXPL_NOT_NEIGHBOR = 0x62, /* VN2VN_Port not in neighbor set */
+ /* TBD - above definitions incomplete */
+};
+
+/*
+ * Common service parameters (N ports).
+ */
+struct fc_els_csp {
+ __u8 sp_hi_ver; /* highest version supported (obs.) */
+ __u8 sp_lo_ver; /* highest version supported (obs.) */
+ __be16 sp_bb_cred; /* buffer-to-buffer credits */
+ __be16 sp_features; /* common feature flags */
+ __be16 sp_bb_data; /* b-b state number and data field sz */
+ union {
+ struct {
+ __be16 _sp_tot_seq; /* total concurrent sequences */
+ __be16 _sp_rel_off; /* rel. offset by info cat */
+ } sp_plogi;
+ struct {
+ __be32 _sp_r_a_tov; /* resource alloc. timeout msec */
+ } sp_flogi_acc;
+ } sp_u;
+ __be32 sp_e_d_tov; /* error detect timeout value */
+};
+#define sp_tot_seq sp_u.sp_plogi._sp_tot_seq
+#define sp_rel_off sp_u.sp_plogi._sp_rel_off
+#define sp_r_a_tov sp_u.sp_flogi_acc._sp_r_a_tov
+
+#define FC_SP_BB_DATA_MASK 0xfff /* mask for data field size in sp_bb_data */
+
+/*
+ * Minimum and maximum values for max data field size in service parameters.
+ */
+#define FC_SP_MIN_MAX_PAYLOAD FC_MIN_MAX_PAYLOAD
+#define FC_SP_MAX_MAX_PAYLOAD FC_MAX_PAYLOAD
+
+/*
+ * sp_features
+ */
+#define FC_SP_FT_NPIV 0x8000 /* multiple N_Port_ID support (FLOGI) */
+#define FC_SP_FT_CIRO 0x8000 /* continuously increasing rel off (PLOGI) */
+#define FC_SP_FT_CLAD 0x8000 /* clean address (in FLOGI LS_ACC) */
+#define FC_SP_FT_RAND 0x4000 /* random relative offset */
+#define FC_SP_FT_VAL 0x2000 /* valid vendor version level */
+#define FC_SP_FT_NPIV_ACC 0x2000 /* NPIV assignment (FLOGI LS_ACC) */
+#define FC_SP_FT_FPORT 0x1000 /* F port (1) vs. N port (0) */
+#define FC_SP_FT_ABB 0x0800 /* alternate BB_credit management */
+#define FC_SP_FT_EDTR 0x0400 /* E_D_TOV Resolution is nanoseconds */
+#define FC_SP_FT_MCAST 0x0200 /* multicast */
+#define FC_SP_FT_BCAST 0x0100 /* broadcast */
+#define FC_SP_FT_HUNT 0x0080 /* hunt group */
+#define FC_SP_FT_SIMP 0x0040 /* dedicated simplex */
+#define FC_SP_FT_SEC 0x0020 /* reserved for security */
+#define FC_SP_FT_CSYN 0x0010 /* clock synch. supported */
+#define FC_SP_FT_RTTOV 0x0008 /* R_T_TOV value 100 uS, else 100 mS */
+#define FC_SP_FT_HALF 0x0004 /* dynamic half duplex */
+#define FC_SP_FT_SEQC 0x0002 /* SEQ_CNT */
+#define FC_SP_FT_PAYL 0x0001 /* FLOGI payload length 256, else 116 */
+
+/*
+ * Class-specific service parameters.
+ */
+struct fc_els_cssp {
+ __be16 cp_class; /* class flags */
+ __be16 cp_init; /* initiator flags */
+ __be16 cp_recip; /* recipient flags */
+ __be16 cp_rdfs; /* receive data field size */
+ __be16 cp_con_seq; /* concurrent sequences */
+ __be16 cp_ee_cred; /* N-port end-to-end credit */
+ __u8 cp_resv1; /* reserved */
+ __u8 cp_open_seq; /* open sequences per exchange */
+ __u8 _cp_resv2[2]; /* reserved */
+};
+
+/*
+ * cp_class flags.
+ */
+#define FC_CPC_VALID 0x8000 /* class valid */
+#define FC_CPC_IMIX 0x4000 /* intermix mode */
+#define FC_CPC_SEQ 0x0800 /* sequential delivery */
+#define FC_CPC_CAMP 0x0200 /* camp-on */
+#define FC_CPC_PRI 0x0080 /* priority */
+
+/*
+ * cp_init flags.
+ * (TBD: not all flags defined here).
+ */
+#define FC_CPI_CSYN 0x0010 /* clock synch. capable */
+
+/*
+ * cp_recip flags.
+ */
+#define FC_CPR_CSYN 0x0008 /* clock synch. capable */
+
+/*
+ * NFC_ELS_FLOGI: Fabric login request.
+ * NFC_ELS_PLOGI: Port login request (same format).
+ */
+struct fc_els_flogi {
+ __u8 fl_cmd; /* command */
+ __u8 _fl_resvd[3]; /* must be zero */
+ struct fc_els_csp fl_csp; /* common service parameters */
+ __be64 fl_wwpn; /* port name */
+ __be64 fl_wwnn; /* node name */
+ struct fc_els_cssp fl_cssp[4]; /* class 1-4 service parameters */
+ __u8 fl_vend[16]; /* vendor version level */
+} __attribute__((__packed__));
+
+/*
+ * Process login service parameter page.
+ */
+struct fc_els_spp {
+ __u8 spp_type; /* type code or common service params */
+ __u8 spp_type_ext; /* type code extension */
+ __u8 spp_flags;
+ __u8 _spp_resvd;
+ __be32 spp_orig_pa; /* originator process associator */
+ __be32 spp_resp_pa; /* responder process associator */
+ __be32 spp_params; /* service parameters */
+};
+
+/*
+ * spp_flags.
+ */
+#define FC_SPP_OPA_VAL 0x80 /* originator proc. assoc. valid */
+#define FC_SPP_RPA_VAL 0x40 /* responder proc. assoc. valid */
+#define FC_SPP_EST_IMG_PAIR 0x20 /* establish image pair */
+#define FC_SPP_RESP_MASK 0x0f /* mask for response code (below) */
+
+/*
+ * SPP response code in spp_flags - lower 4 bits.
+ */
+enum fc_els_spp_resp {
+ FC_SPP_RESP_ACK = 1, /* request executed */
+ FC_SPP_RESP_RES = 2, /* unable due to lack of resources */
+ FC_SPP_RESP_INIT = 3, /* initialization not complete */
+ FC_SPP_RESP_NO_PA = 4, /* unknown process associator */
+ FC_SPP_RESP_CONF = 5, /* configuration precludes image pair */
+ FC_SPP_RESP_COND = 6, /* request completed conditionally */
+ FC_SPP_RESP_MULT = 7, /* unable to handle multiple SPPs */
+ FC_SPP_RESP_INVL = 8, /* SPP is invalid */
+};
+
+/*
+ * ELS_RRQ - Reinstate Recovery Qualifier
+ */
+struct fc_els_rrq {
+ __u8 rrq_cmd; /* command (0x12) */
+ __u8 rrq_zero[3]; /* specified as zero - part of cmd */
+ __u8 rrq_resvd; /* reserved */
+ __u8 rrq_s_id[3]; /* originator FID */
+ __be16 rrq_ox_id; /* originator exchange ID */
+ __be16 rrq_rx_id; /* responders exchange ID */
+};
+
+/*
+ * ELS_REC - Read exchange concise.
+ */
+struct fc_els_rec {
+ __u8 rec_cmd; /* command (0x13) */
+ __u8 rec_zero[3]; /* specified as zero - part of cmd */
+ __u8 rec_resvd; /* reserved */
+ __u8 rec_s_id[3]; /* originator FID */
+ __be16 rec_ox_id; /* originator exchange ID */
+ __be16 rec_rx_id; /* responders exchange ID */
+};
+
+/*
+ * ELS_REC LS_ACC payload.
+ */
+struct fc_els_rec_acc {
+ __u8 reca_cmd; /* accept (0x02) */
+ __u8 reca_zero[3]; /* specified as zero - part of cmd */
+ __be16 reca_ox_id; /* originator exchange ID */
+ __be16 reca_rx_id; /* responders exchange ID */
+ __u8 reca_resvd1; /* reserved */
+ __u8 reca_ofid[3]; /* originator FID */
+ __u8 reca_resvd2; /* reserved */
+ __u8 reca_rfid[3]; /* responder FID */
+ __be32 reca_fc4value; /* FC4 value */
+ __be32 reca_e_stat; /* ESB (exchange status block) status */
+};
+
+/*
+ * ELS_PRLI - Process login request and response.
+ */
+struct fc_els_prli {
+ __u8 prli_cmd; /* command */
+ __u8 prli_spp_len; /* length of each serv. parm. page */
+ __be16 prli_len; /* length of entire payload */
+ /* service parameter pages follow */
+};
+
+/*
+ * ELS_PRLO - Process logout request and response.
+ */
+struct fc_els_prlo {
+ __u8 prlo_cmd; /* command */
+ __u8 prlo_obs; /* obsolete, but shall be set to 10h */
+ __be16 prlo_len; /* payload length */
+};
+
+/*
+ * ELS_ADISC payload
+ */
+struct fc_els_adisc {
+ __u8 adisc_cmd;
+ __u8 adisc_resv[3];
+ __u8 adisc_resv1;
+ __u8 adisc_hard_addr[3];
+ __be64 adisc_wwpn;
+ __be64 adisc_wwnn;
+ __u8 adisc_resv2;
+ __u8 adisc_port_id[3];
+} __attribute__((__packed__));
+
+/*
+ * ELS_LOGO - process or fabric logout.
+ */
+struct fc_els_logo {
+ __u8 fl_cmd; /* command code */
+ __u8 fl_zero[3]; /* specified as zero - part of cmd */
+ __u8 fl_resvd; /* reserved */
+ __u8 fl_n_port_id[3];/* N port ID */
+ __be64 fl_n_port_wwn; /* port name */
+};
+
+/*
+ * ELS_RTV - read timeout value.
+ */
+struct fc_els_rtv {
+ __u8 rtv_cmd; /* command code 0x0e */
+ __u8 rtv_zero[3]; /* specified as zero - part of cmd */
+};
+
+/*
+ * LS_ACC for ELS_RTV - read timeout value.
+ */
+struct fc_els_rtv_acc {
+ __u8 rtv_cmd; /* command code 0x02 */
+ __u8 rtv_zero[3]; /* specified as zero - part of cmd */
+ __be32 rtv_r_a_tov; /* resource allocation timeout value */
+ __be32 rtv_e_d_tov; /* error detection timeout value */
+ __be32 rtv_toq; /* timeout qualifier (see below) */
+};
+
+/*
+ * rtv_toq bits.
+ */
+#define FC_ELS_RTV_EDRES (1 << 26) /* E_D_TOV resolution is nS else mS */
+#define FC_ELS_RTV_RTTOV (1 << 19) /* R_T_TOV is 100 uS else 100 mS */
+
+/*
+ * ELS_SCR - state change registration payload.
+ */
+struct fc_els_scr {
+ __u8 scr_cmd; /* command code */
+ __u8 scr_resv[6]; /* reserved */
+ __u8 scr_reg_func; /* registration function (see below) */
+};
+
+enum fc_els_scr_func {
+ ELS_SCRF_FAB = 1, /* fabric-detected registration */
+ ELS_SCRF_NPORT = 2, /* Nx_Port-detected registration */
+ ELS_SCRF_FULL = 3, /* full registration */
+ ELS_SCRF_CLEAR = 255, /* remove any current registrations */
+};
+
+/*
+ * ELS_RSCN - registered state change notification payload.
+ */
+struct fc_els_rscn {
+ __u8 rscn_cmd; /* RSCN opcode (0x61) */
+ __u8 rscn_page_len; /* page length (4) */
+ __be16 rscn_plen; /* payload length including this word */
+
+ /* followed by 4-byte generic affected Port_ID pages */
+};
+
+struct fc_els_rscn_page {
+ __u8 rscn_page_flags; /* event and address format */
+ __u8 rscn_fid[3]; /* fabric ID */
+};
+
+#define ELS_RSCN_EV_QUAL_BIT 2 /* shift count for event qualifier */
+#define ELS_RSCN_EV_QUAL_MASK 0xf /* mask for event qualifier */
+#define ELS_RSCN_ADDR_FMT_BIT 0 /* shift count for address format */
+#define ELS_RSCN_ADDR_FMT_MASK 0x3 /* mask for address format */
+
+enum fc_els_rscn_ev_qual {
+ ELS_EV_QUAL_NONE = 0, /* unspecified */
+ ELS_EV_QUAL_NS_OBJ = 1, /* changed name server object */
+ ELS_EV_QUAL_PORT_ATTR = 2, /* changed port attribute */
+ ELS_EV_QUAL_SERV_OBJ = 3, /* changed service object */
+ ELS_EV_QUAL_SW_CONFIG = 4, /* changed switch configuration */
+ ELS_EV_QUAL_REM_OBJ = 5, /* removed object */
+};
+
+enum fc_els_rscn_addr_fmt {
+ ELS_ADDR_FMT_PORT = 0, /* rscn_fid is a port address */
+ ELS_ADDR_FMT_AREA = 1, /* rscn_fid is a area address */
+ ELS_ADDR_FMT_DOM = 2, /* rscn_fid is a domain address */
+ ELS_ADDR_FMT_FAB = 3, /* anything on fabric may have changed */
+};
+
+/*
+ * ELS_RNID - request Node ID.
+ */
+struct fc_els_rnid {
+ __u8 rnid_cmd; /* RNID opcode (0x78) */
+ __u8 rnid_resv[3]; /* reserved */
+ __u8 rnid_fmt; /* data format */
+ __u8 rnid_resv2[3]; /* reserved */
+};
+
+/*
+ * Node Identification Data formats (rnid_fmt)
+ */
+enum fc_els_rnid_fmt {
+ ELS_RNIDF_NONE = 0, /* no specific identification data */
+ ELS_RNIDF_GEN = 0xdf, /* general topology discovery format */
+};
+
+/*
+ * ELS_RNID response.
+ */
+struct fc_els_rnid_resp {
+ __u8 rnid_cmd; /* response code (LS_ACC) */
+ __u8 rnid_resv[3]; /* reserved */
+ __u8 rnid_fmt; /* data format */
+ __u8 rnid_cid_len; /* common ID data length */
+ __u8 rnid_resv2; /* reserved */
+ __u8 rnid_sid_len; /* specific ID data length */
+};
+
+struct fc_els_rnid_cid {
+ __be64 rnid_wwpn; /* N port name */
+ __be64 rnid_wwnn; /* node name */
+};
+
+struct fc_els_rnid_gen {
+ __u8 rnid_vend_id[16]; /* vendor-unique ID */
+ __be32 rnid_atype; /* associated type (see below) */
+ __be32 rnid_phys_port; /* physical port number */
+ __be32 rnid_att_nodes; /* number of attached nodes */
+ __u8 rnid_node_mgmt; /* node management (see below) */
+ __u8 rnid_ip_ver; /* IP version (see below) */
+ __be16 rnid_prot_port; /* UDP / TCP port number */
+ __be32 rnid_ip_addr[4]; /* IP address */
+ __u8 rnid_resvd[2]; /* reserved */
+ __be16 rnid_vend_spec; /* vendor-specific field */
+};
+
+enum fc_els_rnid_atype {
+ ELS_RNIDA_UNK = 0x01, /* unknown */
+ ELS_RNIDA_OTHER = 0x02, /* none of the following */
+ ELS_RNIDA_HUB = 0x03,
+ ELS_RNIDA_SWITCH = 0x04,
+ ELS_RNIDA_GATEWAY = 0x05,
+ ELS_RNIDA_CONV = 0x06, /* Obsolete, do not use this value */
+ ELS_RNIDA_HBA = 0x07, /* Obsolete, do not use this value */
+ ELS_RNIDA_PROXY = 0x08, /* Obsolete, do not use this value */
+ ELS_RNIDA_STORAGE = 0x09,
+ ELS_RNIDA_HOST = 0x0a,
+ ELS_RNIDA_SUBSYS = 0x0b, /* storage subsystem (e.g., RAID) */
+ ELS_RNIDA_ACCESS = 0x0e, /* access device (e.g. media changer) */
+ ELS_RNIDA_NAS = 0x11, /* NAS server */
+ ELS_RNIDA_BRIDGE = 0x12, /* bridge */
+ ELS_RNIDA_VIRT = 0x13, /* virtualization device */
+ ELS_RNIDA_MF = 0xff, /* multifunction device (bits below) */
+ ELS_RNIDA_MF_HUB = 1UL << 31, /* hub */
+ ELS_RNIDA_MF_SW = 1UL << 30, /* switch */
+ ELS_RNIDA_MF_GW = 1UL << 29, /* gateway */
+ ELS_RNIDA_MF_ST = 1UL << 28, /* storage */
+ ELS_RNIDA_MF_HOST = 1UL << 27, /* host */
+ ELS_RNIDA_MF_SUB = 1UL << 26, /* storage subsystem */
+ ELS_RNIDA_MF_ACC = 1UL << 25, /* storage access dev */
+ ELS_RNIDA_MF_WDM = 1UL << 24, /* wavelength division mux */
+ ELS_RNIDA_MF_NAS = 1UL << 23, /* NAS server */
+ ELS_RNIDA_MF_BR = 1UL << 22, /* bridge */
+ ELS_RNIDA_MF_VIRT = 1UL << 21, /* virtualization device */
+};
+
+enum fc_els_rnid_mgmt {
+ ELS_RNIDM_SNMP = 0,
+ ELS_RNIDM_TELNET = 1,
+ ELS_RNIDM_HTTP = 2,
+ ELS_RNIDM_HTTPS = 3,
+ ELS_RNIDM_XML = 4, /* HTTP + XML */
+};
+
+enum fc_els_rnid_ipver {
+ ELS_RNIDIP_NONE = 0, /* no IP support or node mgmt. */
+ ELS_RNIDIP_V4 = 1, /* IPv4 */
+ ELS_RNIDIP_V6 = 2, /* IPv6 */
+};
+
+/*
+ * ELS RPL - Read Port List.
+ */
+struct fc_els_rpl {
+ __u8 rpl_cmd; /* command */
+ __u8 rpl_resv[5]; /* reserved - must be zero */
+ __be16 rpl_max_size; /* maximum response size or zero */
+ __u8 rpl_resv1; /* reserved - must be zero */
+ __u8 rpl_index[3]; /* starting index */
+};
+
+/*
+ * Port number block in RPL response.
+ */
+struct fc_els_pnb {
+ __be32 pnb_phys_pn; /* physical port number */
+ __u8 pnb_resv; /* reserved */
+ __u8 pnb_port_id[3]; /* port ID */
+ __be64 pnb_wwpn; /* port name */
+};
+
+/*
+ * RPL LS_ACC response.
+ */
+struct fc_els_rpl_resp {
+ __u8 rpl_cmd; /* ELS_LS_ACC */
+ __u8 rpl_resv1; /* reserved - must be zero */
+ __be16 rpl_plen; /* payload length */
+ __u8 rpl_resv2; /* reserved - must be zero */
+ __u8 rpl_llen[3]; /* list length */
+ __u8 rpl_resv3; /* reserved - must be zero */
+ __u8 rpl_index[3]; /* starting index */
+ struct fc_els_pnb rpl_pnb[1]; /* variable number of PNBs */
+};
+
+/*
+ * Link Error Status Block.
+ */
+struct fc_els_lesb {
+ __be32 lesb_link_fail; /* link failure count */
+ __be32 lesb_sync_loss; /* loss of synchronization count */
+ __be32 lesb_sig_loss; /* loss of signal count */
+ __be32 lesb_prim_err; /* primitive sequence error count */
+ __be32 lesb_inv_word; /* invalid transmission word count */
+ __be32 lesb_inv_crc; /* invalid CRC count */
+};
+
+/*
+ * ELS RPS - Read Port Status Block request.
+ */
+struct fc_els_rps {
+ __u8 rps_cmd; /* command */
+ __u8 rps_resv[2]; /* reserved - must be zero */
+ __u8 rps_flag; /* flag - see below */
+ __be64 rps_port_spec; /* port selection */
+};
+
+enum fc_els_rps_flag {
+ FC_ELS_RPS_DID = 0x00, /* port identified by D_ID of req. */
+ FC_ELS_RPS_PPN = 0x01, /* port_spec is physical port number */
+ FC_ELS_RPS_WWPN = 0x02, /* port_spec is port WWN */
+};
+
+/*
+ * ELS RPS LS_ACC response.
+ */
+struct fc_els_rps_resp {
+ __u8 rps_cmd; /* command - LS_ACC */
+ __u8 rps_resv[2]; /* reserved - must be zero */
+ __u8 rps_flag; /* flag - see below */
+ __u8 rps_resv2[2]; /* reserved */
+ __be16 rps_status; /* port status - see below */
+ struct fc_els_lesb rps_lesb; /* link error status block */
+};
+
+enum fc_els_rps_resp_flag {
+ FC_ELS_RPS_LPEV = 0x01, /* L_port extension valid */
+};
+
+enum fc_els_rps_resp_status {
+ FC_ELS_RPS_PTP = 1 << 5, /* point-to-point connection */
+ FC_ELS_RPS_LOOP = 1 << 4, /* loop mode */
+ FC_ELS_RPS_FAB = 1 << 3, /* fabric present */
+ FC_ELS_RPS_NO_SIG = 1 << 2, /* loss of signal */
+ FC_ELS_RPS_NO_SYNC = 1 << 1, /* loss of synchronization */
+ FC_ELS_RPS_RESET = 1 << 0, /* in link reset protocol */
+};
+
+/*
+ * ELS LIRR - Link Incident Record Registration request.
+ */
+struct fc_els_lirr {
+ __u8 lirr_cmd; /* command */
+ __u8 lirr_resv[3]; /* reserved - must be zero */
+ __u8 lirr_func; /* registration function */
+ __u8 lirr_fmt; /* FC-4 type of RLIR requested */
+ __u8 lirr_resv2[2]; /* reserved - must be zero */
+};
+
+enum fc_els_lirr_func {
+ ELS_LIRR_SET_COND = 0x01, /* set - conditionally receive */
+ ELS_LIRR_SET_UNCOND = 0x02, /* set - unconditionally receive */
+ ELS_LIRR_CLEAR = 0xff /* clear registration */
+};
+
+/*
+ * ELS SRL - Scan Remote Loop request.
+ */
+struct fc_els_srl {
+ __u8 srl_cmd; /* command */
+ __u8 srl_resv[3]; /* reserved - must be zero */
+ __u8 srl_flag; /* flag - see below */
+ __u8 srl_flag_param[3]; /* flag parameter */
+};
+
+enum fc_els_srl_flag {
+ FC_ELS_SRL_ALL = 0x00, /* scan all FL ports */
+ FC_ELS_SRL_ONE = 0x01, /* scan specified loop */
+ FC_ELS_SRL_EN_PER = 0x02, /* enable periodic scanning (param) */
+ FC_ELS_SRL_DIS_PER = 0x03, /* disable periodic scanning */
+};
+
+/*
+ * ELS RLS - Read Link Error Status Block request.
+ */
+struct fc_els_rls {
+ __u8 rls_cmd; /* command */
+ __u8 rls_resv[4]; /* reserved - must be zero */
+ __u8 rls_port_id[3]; /* port ID */
+};
+
+/*
+ * ELS RLS LS_ACC Response.
+ */
+struct fc_els_rls_resp {
+ __u8 rls_cmd; /* ELS_LS_ACC */
+ __u8 rls_resv[3]; /* reserved - must be zero */
+ struct fc_els_lesb rls_lesb; /* link error status block */
+};
+
+/*
+ * ELS RLIR - Registered Link Incident Report.
+ * This is followed by the CLIR and the CLID, described below.
+ */
+struct fc_els_rlir {
+ __u8 rlir_cmd; /* command */
+ __u8 rlir_resv[3]; /* reserved - must be zero */
+ __u8 rlir_fmt; /* format (FC4-type if type specific) */
+ __u8 rlir_clr_len; /* common link incident record length */
+ __u8 rlir_cld_len; /* common link incident desc. length */
+ __u8 rlir_slr_len; /* spec. link incident record length */
+};
+
+/*
+ * CLIR - Common Link Incident Record Data. - Sent via RLIR.
+ */
+struct fc_els_clir {
+ __be64 clir_wwpn; /* incident port name */
+ __be64 clir_wwnn; /* incident port node name */
+ __u8 clir_port_type; /* incident port type */
+ __u8 clir_port_id[3]; /* incident port ID */
+
+ __be64 clir_conn_wwpn; /* connected port name */
+ __be64 clir_conn_wwnn; /* connected node name */
+ __be64 clir_fab_name; /* fabric name */
+ __be32 clir_phys_port; /* physical port number */
+ __be32 clir_trans_id; /* transaction ID */
+ __u8 clir_resv[3]; /* reserved */
+ __u8 clir_ts_fmt; /* time stamp format */
+ __be64 clir_timestamp; /* time stamp */
+};
+
+/*
+ * CLIR clir_ts_fmt - time stamp format values.
+ */
+enum fc_els_clir_ts_fmt {
+ ELS_CLIR_TS_UNKNOWN = 0, /* time stamp field unknown */
+ ELS_CLIR_TS_SEC_FRAC = 1, /* time in seconds and fractions */
+ ELS_CLIR_TS_CSU = 2, /* time in clock synch update format */
+};
+
+/*
+ * Common Link Incident Descriptor - sent via RLIR.
+ */
+struct fc_els_clid {
+ __u8 clid_iq; /* incident qualifier flags */
+ __u8 clid_ic; /* incident code */
+ __be16 clid_epai; /* domain/area of ISL */
+};
+
+/*
+ * CLID incident qualifier flags.
+ */
+enum fc_els_clid_iq {
+ ELS_CLID_SWITCH = 0x20, /* incident port is a switch node */
+ ELS_CLID_E_PORT = 0x10, /* incident is an ISL (E) port */
+ ELS_CLID_SEV_MASK = 0x0c, /* severity 2-bit field mask */
+ ELS_CLID_SEV_INFO = 0x00, /* report is informational */
+ ELS_CLID_SEV_INOP = 0x08, /* link not operational */
+ ELS_CLID_SEV_DEG = 0x04, /* link degraded but operational */
+ ELS_CLID_LASER = 0x02, /* subassembly is a laser */
+ ELS_CLID_FRU = 0x01, /* format can identify a FRU */
+};
+
+/*
+ * CLID incident code.
+ */
+enum fc_els_clid_ic {
+ ELS_CLID_IC_IMPL = 1, /* implicit incident */
+ ELS_CLID_IC_BER = 2, /* bit-error-rate threshold exceeded */
+ ELS_CLID_IC_LOS = 3, /* loss of synch or signal */
+ ELS_CLID_IC_NOS = 4, /* non-operational primitive sequence */
+ ELS_CLID_IC_PST = 5, /* primitive sequence timeout */
+ ELS_CLID_IC_INVAL = 6, /* invalid primitive sequence */
+ ELS_CLID_IC_LOOP_TO = 7, /* loop initialization time out */
+ ELS_CLID_IC_LIP = 8, /* receiving LIP */
+};
+
+#endif /* _FC_ELS_H_ */
diff --git a/include/uapi/scsi/fc/fc_fs.h b/include/uapi/scsi/fc/fc_fs.h
new file mode 100644
index 0000000..50f28b1
--- /dev/null
+++ b/include/uapi/scsi/fc/fc_fs.h
@@ -0,0 +1,348 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FS_H_
+#define _FC_FS_H_
+
+#include <linux/types.h>
+
+/*
+ * Fibre Channel Framing and Signalling definitions.
+ * From T11 FC-FS-2 Rev 0.90 - 9 August 2005.
+ */
+
+/*
+ * Frame header
+ */
+struct fc_frame_header {
+ __u8 fh_r_ctl; /* routing control */
+ __u8 fh_d_id[3]; /* Destination ID */
+
+ __u8 fh_cs_ctl; /* class of service control / pri */
+ __u8 fh_s_id[3]; /* Source ID */
+
+ __u8 fh_type; /* see enum fc_fh_type below */
+ __u8 fh_f_ctl[3]; /* frame control */
+
+ __u8 fh_seq_id; /* sequence ID */
+ __u8 fh_df_ctl; /* data field control */
+ __be16 fh_seq_cnt; /* sequence count */
+
+ __be16 fh_ox_id; /* originator exchange ID */
+ __be16 fh_rx_id; /* responder exchange ID */
+ __be32 fh_parm_offset; /* parameter or relative offset */
+};
+
+#define FC_FRAME_HEADER_LEN 24 /* expected length of structure */
+
+#define FC_MAX_PAYLOAD 2112U /* max payload length in bytes */
+#define FC_MIN_MAX_PAYLOAD 256U /* lower limit on max payload */
+
+#define FC_MAX_FRAME (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
+#define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
+
+/*
+ * fh_r_ctl - Routing control definitions.
+ */
+ /*
+ * FC-4 device_data.
+ */
+enum fc_rctl {
+ FC_RCTL_DD_UNCAT = 0x00, /* uncategorized information */
+ FC_RCTL_DD_SOL_DATA = 0x01, /* solicited data */
+ FC_RCTL_DD_UNSOL_CTL = 0x02, /* unsolicited control */
+ FC_RCTL_DD_SOL_CTL = 0x03, /* solicited control or reply */
+ FC_RCTL_DD_UNSOL_DATA = 0x04, /* unsolicited data */
+ FC_RCTL_DD_DATA_DESC = 0x05, /* data descriptor */
+ FC_RCTL_DD_UNSOL_CMD = 0x06, /* unsolicited command */
+ FC_RCTL_DD_CMD_STATUS = 0x07, /* command status */
+
+#define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL /* ILS request */
+#define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL /* ILS reply */
+
+ /*
+ * Extended Link_Data
+ */
+ FC_RCTL_ELS_REQ = 0x22, /* extended link services request */
+ FC_RCTL_ELS_REP = 0x23, /* extended link services reply */
+ FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */
+ FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */
+ /*
+ * Optional Extended Headers
+ */
+ FC_RCTL_VFTH = 0x50, /* virtual fabric tagging header */
+ FC_RCTL_IFRH = 0x51, /* inter-fabric routing header */
+ FC_RCTL_ENCH = 0x52, /* encapsulation header */
+ /*
+ * Basic Link Services fh_r_ctl values.
+ */
+ FC_RCTL_BA_NOP = 0x80, /* basic link service NOP */
+ FC_RCTL_BA_ABTS = 0x81, /* basic link service abort */
+ FC_RCTL_BA_RMC = 0x82, /* remove connection */
+ FC_RCTL_BA_ACC = 0x84, /* basic accept */
+ FC_RCTL_BA_RJT = 0x85, /* basic reject */
+ FC_RCTL_BA_PRMT = 0x86, /* dedicated connection preempted */
+ /*
+ * Link Control Information.
+ */
+ FC_RCTL_ACK_1 = 0xc0, /* acknowledge_1 */
+ FC_RCTL_ACK_0 = 0xc1, /* acknowledge_0 */
+ FC_RCTL_P_RJT = 0xc2, /* port reject */
+ FC_RCTL_F_RJT = 0xc3, /* fabric reject */
+ FC_RCTL_P_BSY = 0xc4, /* port busy */
+ FC_RCTL_F_BSY = 0xc5, /* fabric busy to data frame */
+ FC_RCTL_F_BSYL = 0xc6, /* fabric busy to link control frame */
+ FC_RCTL_LCR = 0xc7, /* link credit reset */
+ FC_RCTL_END = 0xc9, /* end */
+};
+ /* incomplete list of definitions */
+
+/*
+ * R_CTL names initializer.
+ * Please keep this matching the above definitions.
+ */
+#define FC_RCTL_NAMES_INIT { \
+ [FC_RCTL_DD_UNCAT] = "uncat", \
+ [FC_RCTL_DD_SOL_DATA] = "sol data", \
+ [FC_RCTL_DD_UNSOL_CTL] = "unsol ctl", \
+ [FC_RCTL_DD_SOL_CTL] = "sol ctl/reply", \
+ [FC_RCTL_DD_UNSOL_DATA] = "unsol data", \
+ [FC_RCTL_DD_DATA_DESC] = "data desc", \
+ [FC_RCTL_DD_UNSOL_CMD] = "unsol cmd", \
+ [FC_RCTL_DD_CMD_STATUS] = "cmd status", \
+ [FC_RCTL_ELS_REQ] = "ELS req", \
+ [FC_RCTL_ELS_REP] = "ELS rep", \
+ [FC_RCTL_ELS4_REQ] = "FC-4 ELS req", \
+ [FC_RCTL_ELS4_REP] = "FC-4 ELS rep", \
+ [FC_RCTL_BA_NOP] = "BLS NOP", \
+ [FC_RCTL_BA_ABTS] = "BLS abort", \
+ [FC_RCTL_BA_RMC] = "BLS remove connection", \
+ [FC_RCTL_BA_ACC] = "BLS accept", \
+ [FC_RCTL_BA_RJT] = "BLS reject", \
+ [FC_RCTL_BA_PRMT] = "BLS dedicated connection preempted", \
+ [FC_RCTL_ACK_1] = "LC ACK_1", \
+ [FC_RCTL_ACK_0] = "LC ACK_0", \
+ [FC_RCTL_P_RJT] = "LC port reject", \
+ [FC_RCTL_F_RJT] = "LC fabric reject", \
+ [FC_RCTL_P_BSY] = "LC port busy", \
+ [FC_RCTL_F_BSY] = "LC fabric busy to data frame", \
+ [FC_RCTL_F_BSYL] = "LC fabric busy to link control frame",\
+ [FC_RCTL_LCR] = "LC link credit reset", \
+ [FC_RCTL_END] = "LC end", \
+}
+
+/*
+ * Well-known fabric addresses.
+ */
+enum fc_well_known_fid {
+ FC_FID_NONE = 0x000000, /* No destination */
+ FC_FID_BCAST = 0xffffff, /* broadcast */
+ FC_FID_FLOGI = 0xfffffe, /* fabric login */
+ FC_FID_FCTRL = 0xfffffd, /* fabric controller */
+ FC_FID_DIR_SERV = 0xfffffc, /* directory server */
+ FC_FID_TIME_SERV = 0xfffffb, /* time server */
+ FC_FID_MGMT_SERV = 0xfffffa, /* management server */
+ FC_FID_QOS = 0xfffff9, /* QoS Facilitator */
+ FC_FID_ALIASES = 0xfffff8, /* alias server (FC-PH2) */
+ FC_FID_SEC_KEY = 0xfffff7, /* Security key dist. server */
+ FC_FID_CLOCK = 0xfffff6, /* clock synch server */
+ FC_FID_MCAST_SERV = 0xfffff5, /* multicast server */
+};
+
+#define FC_FID_WELL_KNOWN_MAX 0xffffff /* highest well-known fabric ID */
+#define FC_FID_WELL_KNOWN_BASE 0xfffff5 /* start of well-known fabric ID */
+
+/*
+ * Other well-known addresses, outside the above contiguous range.
+ */
+#define FC_FID_DOM_MGR 0xfffc00 /* domain manager base */
+
+/*
+ * Fabric ID bytes.
+ */
+#define FC_FID_DOMAIN 0
+#define FC_FID_PORT 1
+#define FC_FID_LINK 2
+
+/*
+ * fh_type codes
+ */
+enum fc_fh_type {
+ FC_TYPE_BLS = 0x00, /* basic link service */
+ FC_TYPE_ELS = 0x01, /* extended link service */
+ FC_TYPE_IP = 0x05, /* IP over FC, RFC 4338 */
+ FC_TYPE_FCP = 0x08, /* SCSI FCP */
+ FC_TYPE_CT = 0x20, /* Fibre Channel Services (FC-CT) */
+ FC_TYPE_ILS = 0x22, /* internal link service */
+};
+
+/*
+ * FC_TYPE names initializer.
+ * Please keep this matching the above definitions.
+ */
+#define FC_TYPE_NAMES_INIT { \
+ [FC_TYPE_BLS] = "BLS", \
+ [FC_TYPE_ELS] = "ELS", \
+ [FC_TYPE_IP] = "IP", \
+ [FC_TYPE_FCP] = "FCP", \
+ [FC_TYPE_CT] = "CT", \
+ [FC_TYPE_ILS] = "ILS", \
+}
+
+/*
+ * Exchange IDs.
+ */
+#define FC_XID_UNKNOWN 0xffff /* unknown exchange ID */
+#define FC_XID_MIN 0x0 /* supported min exchange ID */
+#define FC_XID_MAX 0xfffe /* supported max exchange ID */
+
+/*
+ * fh_f_ctl - Frame control flags.
+ */
+#define FC_FC_EX_CTX (1 << 23) /* sent by responder to exchange */
+#define FC_FC_SEQ_CTX (1 << 22) /* sent by responder to sequence */
+#define FC_FC_FIRST_SEQ (1 << 21) /* first sequence of this exchange */
+#define FC_FC_LAST_SEQ (1 << 20) /* last sequence of this exchange */
+#define FC_FC_END_SEQ (1 << 19) /* last frame of sequence */
+#define FC_FC_END_CONN (1 << 18) /* end of class 1 connection pending */
+#define FC_FC_RES_B17 (1 << 17) /* reserved */
+#define FC_FC_SEQ_INIT (1 << 16) /* transfer of sequence initiative */
+#define FC_FC_X_ID_REASS (1 << 15) /* exchange ID has been changed */
+#define FC_FC_X_ID_INVAL (1 << 14) /* exchange ID invalidated */
+
+#define FC_FC_ACK_1 (1 << 12) /* 13:12 = 1: ACK_1 expected */
+#define FC_FC_ACK_N (2 << 12) /* 13:12 = 2: ACK_N expected */
+#define FC_FC_ACK_0 (3 << 12) /* 13:12 = 3: ACK_0 expected */
+
+#define FC_FC_RES_B11 (1 << 11) /* reserved */
+#define FC_FC_RES_B10 (1 << 10) /* reserved */
+#define FC_FC_RETX_SEQ (1 << 9) /* retransmitted sequence */
+#define FC_FC_UNI_TX (1 << 8) /* unidirectional transmit (class 1) */
+#define FC_FC_CONT_SEQ(i) ((i) << 6)
+#define FC_FC_ABT_SEQ(i) ((i) << 4)
+#define FC_FC_REL_OFF (1 << 3) /* parameter is relative offset */
+#define FC_FC_RES2 (1 << 2) /* reserved */
+#define FC_FC_FILL(i) ((i) & 3) /* 1:0: bytes of trailing fill */
+
+/*
+ * BA_ACC payload.
+ */
+struct fc_ba_acc {
+ __u8 ba_seq_id_val; /* SEQ_ID validity */
+#define FC_BA_SEQ_ID_VAL 0x80
+ __u8 ba_seq_id; /* SEQ_ID of seq last deliverable */
+ __u8 ba_resvd[2]; /* reserved */
+ __be16 ba_ox_id; /* OX_ID for aborted seq or exch */
+ __be16 ba_rx_id; /* RX_ID for aborted seq or exch */
+ __be16 ba_low_seq_cnt; /* low SEQ_CNT of aborted seq */
+ __be16 ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */
+};
+
+/*
+ * BA_RJT: Basic Reject payload.
+ */
+struct fc_ba_rjt {
+ __u8 br_resvd; /* reserved */
+ __u8 br_reason; /* reason code */
+ __u8 br_explan; /* reason explanation */
+ __u8 br_vendor; /* vendor unique code */
+};
+
+/*
+ * BA_RJT reason codes.
+ * From FS-2.
+ */
+enum fc_ba_rjt_reason {
+ FC_BA_RJT_NONE = 0, /* in software this means no reject */
+ FC_BA_RJT_INVL_CMD = 0x01, /* invalid command code */
+ FC_BA_RJT_LOG_ERR = 0x03, /* logical error */
+ FC_BA_RJT_LOG_BUSY = 0x05, /* logical busy */
+ FC_BA_RJT_PROTO_ERR = 0x07, /* protocol error */
+ FC_BA_RJT_UNABLE = 0x09, /* unable to perform request */
+ FC_BA_RJT_VENDOR = 0xff, /* vendor-specific (see br_vendor) */
+};
+
+/*
+ * BA_RJT reason code explanations.
+ */
+enum fc_ba_rjt_explan {
+ FC_BA_RJT_EXP_NONE = 0x00, /* no additional expanation */
+ FC_BA_RJT_INV_XID = 0x03, /* invalid OX_ID-RX_ID combination */
+ FC_BA_RJT_ABT = 0x05, /* sequence aborted, no seq info */
+};
+
+/*
+ * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field.
+ */
+struct fc_pf_rjt {
+ __u8 rj_action; /* reserved */
+ __u8 rj_reason; /* reason code */
+ __u8 rj_resvd; /* reserved */
+ __u8 rj_vendor; /* vendor unique code */
+};
+
+/*
+ * P_RJT and F_RJT reject reason codes.
+ */
+enum fc_pf_rjt_reason {
+ FC_RJT_NONE = 0, /* non-reject (reserved by standard) */
+ FC_RJT_INVL_DID = 0x01, /* invalid destination ID */
+ FC_RJT_INVL_SID = 0x02, /* invalid source ID */
+ FC_RJT_P_UNAV_T = 0x03, /* port unavailable, temporary */
+ FC_RJT_P_UNAV = 0x04, /* port unavailable, permanent */
+ FC_RJT_CLS_UNSUP = 0x05, /* class not supported */
+ FC_RJT_DEL_USAGE = 0x06, /* delimiter usage error */
+ FC_RJT_TYPE_UNSUP = 0x07, /* type not supported */
+ FC_RJT_LINK_CTL = 0x08, /* invalid link control */
+ FC_RJT_R_CTL = 0x09, /* invalid R_CTL field */
+ FC_RJT_F_CTL = 0x0a, /* invalid F_CTL field */
+ FC_RJT_OX_ID = 0x0b, /* invalid originator exchange ID */
+ FC_RJT_RX_ID = 0x0c, /* invalid responder exchange ID */
+ FC_RJT_SEQ_ID = 0x0d, /* invalid sequence ID */
+ FC_RJT_DF_CTL = 0x0e, /* invalid DF_CTL field */
+ FC_RJT_SEQ_CNT = 0x0f, /* invalid SEQ_CNT field */
+ FC_RJT_PARAM = 0x10, /* invalid parameter field */
+ FC_RJT_EXCH_ERR = 0x11, /* exchange error */
+ FC_RJT_PROTO = 0x12, /* protocol error */
+ FC_RJT_LEN = 0x13, /* incorrect length */
+ FC_RJT_UNEXP_ACK = 0x14, /* unexpected ACK */
+ FC_RJT_FAB_CLASS = 0x15, /* class unsupported by fabric entity */
+ FC_RJT_LOGI_REQ = 0x16, /* login required */
+ FC_RJT_SEQ_XS = 0x17, /* excessive sequences attempted */
+ FC_RJT_EXCH_EST = 0x18, /* unable to establish exchange */
+ FC_RJT_FAB_UNAV = 0x1a, /* fabric unavailable */
+ FC_RJT_VC_ID = 0x1b, /* invalid VC_ID (class 4) */
+ FC_RJT_CS_CTL = 0x1c, /* invalid CS_CTL field */
+ FC_RJT_INSUF_RES = 0x1d, /* insuff. resources for VC (Class 4) */
+ FC_RJT_INVL_CLS = 0x1f, /* invalid class of service */
+ FC_RJT_PREEMT_RJT = 0x20, /* preemption request rejected */
+ FC_RJT_PREEMT_DIS = 0x21, /* preemption not enabled */
+ FC_RJT_MCAST_ERR = 0x22, /* multicast error */
+ FC_RJT_MCAST_ET = 0x23, /* multicast error terminate */
+ FC_RJT_PRLI_REQ = 0x24, /* process login required */
+ FC_RJT_INVL_ATT = 0x25, /* invalid attachment */
+ FC_RJT_VENDOR = 0xff, /* vendor specific reject */
+};
+
+/* default timeout values */
+
+#define FC_DEF_E_D_TOV 2000UL
+#define FC_DEF_R_A_TOV 10000UL
+
+#endif /* _FC_FS_H_ */
diff --git a/include/uapi/scsi/fc/fc_gs.h b/include/uapi/scsi/fc/fc_gs.h
new file mode 100644
index 0000000..a37346d
--- /dev/null
+++ b/include/uapi/scsi/fc/fc_gs.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_GS_H_
+#define _FC_GS_H_
+
+#include <linux/types.h>
+
+/*
+ * Fibre Channel Services - Common Transport.
+ * From T11.org FC-GS-2 Rev 5.3 November 1998.
+ */
+
+struct fc_ct_hdr {
+ __u8 ct_rev; /* revision */
+ __u8 ct_in_id[3]; /* N_Port ID of original requestor */
+ __u8 ct_fs_type; /* type of fibre channel service */
+ __u8 ct_fs_subtype; /* subtype */
+ __u8 ct_options;
+ __u8 _ct_resvd1;
+ __be16 ct_cmd; /* command / response code */
+ __be16 ct_mr_size; /* maximum / residual size */
+ __u8 _ct_resvd2;
+ __u8 ct_reason; /* reject reason */
+ __u8 ct_explan; /* reason code explanation */
+ __u8 ct_vendor; /* vendor unique data */
+};
+
+#define FC_CT_HDR_LEN 16 /* expected sizeof (struct fc_ct_hdr) */
+
+enum fc_ct_rev {
+ FC_CT_REV = 1 /* common transport revision */
+};
+
+/*
+ * ct_fs_type values.
+ */
+enum fc_ct_fs_type {
+ FC_FST_ALIAS = 0xf8, /* alias service */
+ FC_FST_MGMT = 0xfa, /* management service */
+ FC_FST_TIME = 0xfb, /* time service */
+ FC_FST_DIR = 0xfc, /* directory service */
+};
+
+/*
+ * ct_cmd: Command / response codes
+ */
+enum fc_ct_cmd {
+ FC_FS_RJT = 0x8001, /* reject */
+ FC_FS_ACC = 0x8002, /* accept */
+};
+
+/*
+ * FS_RJT reason codes.
+ */
+enum fc_ct_reason {
+ FC_FS_RJT_CMD = 0x01, /* invalid command code */
+ FC_FS_RJT_VER = 0x02, /* invalid version level */
+ FC_FS_RJT_LOG = 0x03, /* logical error */
+ FC_FS_RJT_IUSIZ = 0x04, /* invalid IU size */
+ FC_FS_RJT_BSY = 0x05, /* logical busy */
+ FC_FS_RJT_PROTO = 0x07, /* protocol error */
+ FC_FS_RJT_UNABL = 0x09, /* unable to perform command request */
+ FC_FS_RJT_UNSUP = 0x0b, /* command not supported */
+};
+
+/*
+ * FS_RJT reason code explanations.
+ */
+enum fc_ct_explan {
+ FC_FS_EXP_NONE = 0x00, /* no additional explanation */
+ FC_FS_EXP_PID = 0x01, /* port ID not registered */
+ FC_FS_EXP_PNAM = 0x02, /* port name not registered */
+ FC_FS_EXP_NNAM = 0x03, /* node name not registered */
+ FC_FS_EXP_COS = 0x04, /* class of service not registered */
+ FC_FS_EXP_FTNR = 0x07, /* FC-4 types not registered */
+ /* definitions not complete */
+};
+
+#endif /* _FC_GS_H_ */
diff --git a/include/uapi/scsi/fc/fc_ns.h b/include/uapi/scsi/fc/fc_ns.h
new file mode 100644
index 0000000..f7751d5
--- /dev/null
+++ b/include/uapi/scsi/fc/fc_ns.h
@@ -0,0 +1,208 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_NS_H_
+#define _FC_NS_H_
+
+#include <linux/types.h>
+
+/*
+ * Fibre Channel Services - Name Service (dNS)
+ * From T11.org FC-GS-2 Rev 5.3 November 1998.
+ */
+
+/*
+ * Common-transport sub-type for Name Server.
+ */
+#define FC_NS_SUBTYPE 2 /* fs_ct_hdr.ct_fs_subtype */
+
+/*
+ * Name server Requests.
+ * Note: this is an incomplete list, some unused requests are omitted.
+ */
+enum fc_ns_req {
+ FC_NS_GA_NXT = 0x0100, /* get all next */
+ FC_NS_GI_A = 0x0101, /* get identifiers - scope */
+ FC_NS_GPN_ID = 0x0112, /* get port name by ID */
+ FC_NS_GNN_ID = 0x0113, /* get node name by ID */
+ FC_NS_GSPN_ID = 0x0118, /* get symbolic port name */
+ FC_NS_GID_PN = 0x0121, /* get ID for port name */
+ FC_NS_GID_NN = 0x0131, /* get IDs for node name */
+ FC_NS_GID_FT = 0x0171, /* get IDs by FC4 type */
+ FC_NS_GPN_FT = 0x0172, /* get port names by FC4 type */
+ FC_NS_GID_PT = 0x01a1, /* get IDs by port type */
+ FC_NS_RPN_ID = 0x0212, /* reg port name for ID */
+ FC_NS_RNN_ID = 0x0213, /* reg node name for ID */
+ FC_NS_RFT_ID = 0x0217, /* reg FC4 type for ID */
+ FC_NS_RSPN_ID = 0x0218, /* reg symbolic port name */
+ FC_NS_RFF_ID = 0x021f, /* reg FC4 Features for ID */
+ FC_NS_RSNN_NN = 0x0239, /* reg symbolic node name */
+};
+
+/*
+ * Port type values.
+ */
+enum fc_ns_pt {
+ FC_NS_UNID_PORT = 0x00, /* unidentified */
+ FC_NS_N_PORT = 0x01, /* N port */
+ FC_NS_NL_PORT = 0x02, /* NL port */
+ FC_NS_FNL_PORT = 0x03, /* F/NL port */
+ FC_NS_NX_PORT = 0x7f, /* Nx port */
+ FC_NS_F_PORT = 0x81, /* F port */
+ FC_NS_FL_PORT = 0x82, /* FL port */
+ FC_NS_E_PORT = 0x84, /* E port */
+ FC_NS_B_PORT = 0x85, /* B port */
+};
+
+/*
+ * Port type object.
+ */
+struct fc_ns_pt_obj {
+ __u8 pt_type;
+};
+
+/*
+ * Port ID object
+ */
+struct fc_ns_fid {
+ __u8 fp_flags; /* flags for responses only */
+ __u8 fp_fid[3];
+};
+
+/*
+ * fp_flags in port ID object, for responses only.
+ */
+#define FC_NS_FID_LAST 0x80 /* last object */
+
+/*
+ * FC4-types object.
+ */
+#define FC_NS_TYPES 256 /* number of possible FC-4 types */
+#define FC_NS_BPW 32 /* bits per word in bitmap */
+
+struct fc_ns_fts {
+ __be32 ff_type_map[FC_NS_TYPES / FC_NS_BPW]; /* bitmap of FC-4 types */
+};
+
+/*
+ * FC4-features object.
+ */
+struct fc_ns_ff {
+ __be32 fd_feat[FC_NS_TYPES * 4 / FC_NS_BPW]; /* 4-bits per FC-type */
+};
+
+/*
+ * GID_PT request.
+ */
+struct fc_ns_gid_pt {
+ __u8 fn_pt_type;
+ __u8 fn_domain_id_scope;
+ __u8 fn_area_id_scope;
+ __u8 fn_resvd;
+};
+
+/*
+ * GID_FT or GPN_FT request.
+ */
+struct fc_ns_gid_ft {
+ __u8 fn_resvd;
+ __u8 fn_domain_id_scope;
+ __u8 fn_area_id_scope;
+ __u8 fn_fc4_type;
+};
+
+/*
+ * GPN_FT response.
+ */
+struct fc_gpn_ft_resp {
+ __u8 fp_flags; /* see fp_flags definitions above */
+ __u8 fp_fid[3]; /* port ID */
+ __be32 fp_resvd;
+ __be64 fp_wwpn; /* port name */
+};
+
+/*
+ * GID_PN request
+ */
+struct fc_ns_gid_pn {
+ __be64 fn_wwpn; /* port name */
+};
+
+/*
+ * GID_PN response or GSPN_ID request
+ */
+struct fc_gid_pn_resp {
+ __u8 fp_resvd;
+ __u8 fp_fid[3]; /* port ID */
+};
+
+/*
+ * GSPN_ID response
+ */
+struct fc_gspn_resp {
+ __u8 fp_name_len;
+ char fp_name[];
+};
+
+/*
+ * RFT_ID request - register FC-4 types for ID.
+ */
+struct fc_ns_rft_id {
+ struct fc_ns_fid fr_fid; /* port ID object */
+ struct fc_ns_fts fr_fts; /* FC-4 types object */
+};
+
+/*
+ * RPN_ID request - register port name for ID.
+ * RNN_ID request - register node name for ID.
+ */
+struct fc_ns_rn_id {
+ struct fc_ns_fid fr_fid; /* port ID object */
+ __be64 fr_wwn; /* node name or port name */
+} __attribute__((__packed__));
+
+/*
+ * RSNN_NN request - register symbolic node name
+ */
+struct fc_ns_rsnn {
+ __be64 fr_wwn; /* node name */
+ __u8 fr_name_len;
+ char fr_name[];
+} __attribute__((__packed__));
+
+/*
+ * RSPN_ID request - register symbolic port name
+ */
+struct fc_ns_rspn {
+ struct fc_ns_fid fr_fid; /* port ID object */
+ __u8 fr_name_len;
+ char fr_name[];
+} __attribute__((__packed__));
+
+/*
+ * RFF_ID request - register FC-4 Features for ID.
+ */
+struct fc_ns_rff_id {
+ struct fc_ns_fid fr_fid; /* port ID object */
+ __u8 fr_resvd[2];
+ __u8 fr_feat; /* FC-4 Feature bits */
+ __u8 fr_type; /* FC-4 type */
+} __attribute__((__packed__));
+
+#endif /* _FC_NS_H_ */
diff --git a/include/uapi/scsi/scsi_bsg_fc.h b/include/uapi/scsi/scsi_bsg_fc.h
new file mode 100644
index 0000000..3031b90
--- /dev/null
+++ b/include/uapi/scsi/scsi_bsg_fc.h
@@ -0,0 +1,320 @@
+/*
+ * FC Transport BSG Interface
+ *
+ * Copyright (C) 2008 James Smart, Emulex Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef SCSI_BSG_FC_H
+#define SCSI_BSG_FC_H
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+/*
+ * FC Transport SGIO v4 BSG Message Support
+ */
+
+/* Default BSG request timeout (in seconds) */
+#define FC_DEFAULT_BSG_TIMEOUT (10 * HZ)
+
+
+/*
+ * Request Message Codes supported by the FC Transport
+ */
+
+/* define the class masks for the message codes */
+#define FC_BSG_CLS_MASK 0xF0000000 /* find object class */
+#define FC_BSG_HST_MASK 0x80000000 /* fc host class */
+#define FC_BSG_RPT_MASK 0x40000000 /* fc rport class */
+
+ /* fc_host Message Codes */
+#define FC_BSG_HST_ADD_RPORT (FC_BSG_HST_MASK | 0x00000001)
+#define FC_BSG_HST_DEL_RPORT (FC_BSG_HST_MASK | 0x00000002)
+#define FC_BSG_HST_ELS_NOLOGIN (FC_BSG_HST_MASK | 0x00000003)
+#define FC_BSG_HST_CT (FC_BSG_HST_MASK | 0x00000004)
+#define FC_BSG_HST_VENDOR (FC_BSG_HST_MASK | 0x000000FF)
+
+ /* fc_rport Message Codes */
+#define FC_BSG_RPT_ELS (FC_BSG_RPT_MASK | 0x00000001)
+#define FC_BSG_RPT_CT (FC_BSG_RPT_MASK | 0x00000002)
+
+
+
+/*
+ * FC Address Identifiers in Message Structures :
+ *
+ * Whenever a command payload contains a FC Address Identifier
+ * (aka port_id), the value is effectively in big-endian
+ * order, thus the array elements are decoded as follows:
+ * element [0] is bits 23:16 of the FC Address Identifier
+ * element [1] is bits 15:8 of the FC Address Identifier
+ * element [2] is bits 7:0 of the FC Address Identifier
+ */
+
+
+/*
+ * FC Host Messages
+ */
+
+/* FC_BSG_HST_ADDR_PORT : */
+
+/* Request:
+ * This message requests the FC host to login to the remote port
+ * at the specified N_Port_Id. The remote port is to be enumerated
+ * with the transport upon completion of the login.
+ */
+struct fc_bsg_host_add_rport {
+ uint8_t reserved;
+
+ /* FC Address Identier of the remote port to login to */
+ uint8_t port_id[3];
+};
+
+/* Response:
+ * There is no additional response data - fc_bsg_reply->result is sufficient
+ */
+
+
+/* FC_BSG_HST_DEL_RPORT : */
+
+/* Request:
+ * This message requests the FC host to remove an enumerated
+ * remote port and to terminate the login to it.
+ *
+ * Note: The driver is free to reject this request if it desires to
+ * remain logged in with the remote port.
+ */
+struct fc_bsg_host_del_rport {
+ uint8_t reserved;
+
+ /* FC Address Identier of the remote port to logout of */
+ uint8_t port_id[3];
+};
+
+/* Response:
+ * There is no additional response data - fc_bsg_reply->result is sufficient
+ */
+
+
+/* FC_BSG_HST_ELS_NOLOGIN : */
+
+/* Request:
+ * This message requests the FC_Host to send an ELS to a specific
+ * N_Port_ID. The host does not need to log into the remote port,
+ * nor does it need to enumerate the rport for further traffic
+ * (although, the FC host is free to do so if it desires).
+ */
+struct fc_bsg_host_els {
+ /*
+ * ELS Command Code being sent (must be the same as byte 0
+ * of the payload)
+ */
+ uint8_t command_code;
+
+ /* FC Address Identier of the remote port to send the ELS to */
+ uint8_t port_id[3];
+};
+
+/* Response:
+ */
+/* fc_bsg_ctels_reply->status values */
+#define FC_CTELS_STATUS_OK 0x00000000
+#define FC_CTELS_STATUS_REJECT 0x00000001
+#define FC_CTELS_STATUS_P_RJT 0x00000002
+#define FC_CTELS_STATUS_F_RJT 0x00000003
+#define FC_CTELS_STATUS_P_BSY 0x00000004
+#define FC_CTELS_STATUS_F_BSY 0x00000006
+struct fc_bsg_ctels_reply {
+ /*
+ * Note: An ELS LS_RJT may be reported in 2 ways:
+ * a) A status of FC_CTELS_STATUS_OK is returned. The caller
+ * is to look into the ELS receive payload to determine
+ * LS_ACC or LS_RJT (by contents of word 0). The reject
+ * data will be in word 1.
+ * b) A status of FC_CTELS_STATUS_REJECT is returned, The
+ * rjt_data field will contain valid data.
+ *
+ * Note: ELS LS_ACC is determined by an FC_CTELS_STATUS_OK, and
+ * the receive payload word 0 indicates LS_ACC
+ * (e.g. value is 0x02xxxxxx).
+ *
+ * Note: Similarly, a CT Reject may be reported in 2 ways:
+ * a) A status of FC_CTELS_STATUS_OK is returned. The caller
+ * is to look into the CT receive payload to determine
+ * Accept or Reject (by contents of word 2). The reject
+ * data will be in word 3.
+ * b) A status of FC_CTELS_STATUS_REJECT is returned, The
+ * rjt_data field will contain valid data.
+ *
+ * Note: x_RJT/BSY status will indicae that the rjt_data field
+ * is valid and contains the reason/explanation values.
+ */
+ uint32_t status; /* See FC_CTELS_STATUS_xxx */
+
+ /* valid if status is not FC_CTELS_STATUS_OK */
+ struct {
+ uint8_t action; /* fragment_id for CT REJECT */
+ uint8_t reason_code;
+ uint8_t reason_explanation;
+ uint8_t vendor_unique;
+ } rjt_data;
+};
+
+
+/* FC_BSG_HST_CT : */
+
+/* Request:
+ * This message requests that a CT Request be performed with the
+ * indicated N_Port_ID. The driver is responsible for logging in with
+ * the fabric and/or N_Port_ID, etc as per FC rules. This request does
+ * not mandate that the driver must enumerate the destination in the
+ * transport. The driver is allowed to decide whether to enumerate it,
+ * and whether to tear it down after the request.
+ */
+struct fc_bsg_host_ct {
+ uint8_t reserved;
+
+ /* FC Address Identier of the remote port to send the ELS to */
+ uint8_t port_id[3];
+
+ /*
+ * We need words 0-2 of the generic preamble for the LLD's
+ */
+ uint32_t preamble_word0; /* revision & IN_ID */
+ uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */
+ uint32_t preamble_word2; /* Cmd Code, Max Size */
+
+};
+/* Response:
+ *
+ * The reply structure is an fc_bsg_ctels_reply structure
+ */
+
+
+/* FC_BSG_HST_VENDOR : */
+
+/* Request:
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ * formatting requirements specified in scsi_netlink.h
+ */
+struct fc_bsg_host_vendor {
+ /*
+ * Identifies the vendor that the message is formatted for. This
+ * should be the recipient of the message.
+ */
+ uint64_t vendor_id;
+
+ /* start of vendor command area */
+ uint32_t vendor_cmd[0];
+};
+
+/* Response:
+ */
+struct fc_bsg_host_vendor_reply {
+ /* start of vendor response area */
+ uint32_t vendor_rsp[0];
+};
+
+
+
+/*
+ * FC Remote Port Messages
+ */
+
+/* FC_BSG_RPT_ELS : */
+
+/* Request:
+ * This message requests that an ELS be performed with the rport.
+ */
+struct fc_bsg_rport_els {
+ /*
+ * ELS Command Code being sent (must be the same as
+ * byte 0 of the payload)
+ */
+ uint8_t els_code;
+};
+
+/* Response:
+ *
+ * The reply structure is an fc_bsg_ctels_reply structure
+ */
+
+
+/* FC_BSG_RPT_CT : */
+
+/* Request:
+ * This message requests that a CT Request be performed with the rport.
+ */
+struct fc_bsg_rport_ct {
+ /*
+ * We need words 0-2 of the generic preamble for the LLD's
+ */
+ uint32_t preamble_word0; /* revision & IN_ID */
+ uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */
+ uint32_t preamble_word2; /* Cmd Code, Max Size */
+};
+/* Response:
+ *
+ * The reply structure is an fc_bsg_ctels_reply structure
+ */
+
+
+
+
+/* request (CDB) structure of the sg_io_v4 */
+struct fc_bsg_request {
+ uint32_t msgcode;
+ union {
+ struct fc_bsg_host_add_rport h_addrport;
+ struct fc_bsg_host_del_rport h_delrport;
+ struct fc_bsg_host_els h_els;
+ struct fc_bsg_host_ct h_ct;
+ struct fc_bsg_host_vendor h_vendor;
+
+ struct fc_bsg_rport_els r_els;
+ struct fc_bsg_rport_ct r_ct;
+ } rqst_data;
+} __attribute__((packed));
+
+
+/* response (request sense data) structure of the sg_io_v4 */
+struct fc_bsg_reply {
+ /*
+ * The completion result. Result exists in two forms:
+ * if negative, it is an -Exxx system errno value. There will
+ * be no further reply information supplied.
+ * else, it's the 4-byte scsi error result, with driver, host,
+ * msg and status fields. The per-msgcode reply structure
+ * will contain valid data.
+ */
+ uint32_t result;
+
+ /* If there was reply_payload, how much was recevied ? */
+ uint32_t reply_payload_rcv_len;
+
+ union {
+ struct fc_bsg_host_vendor_reply vendor_reply;
+
+ struct fc_bsg_ctels_reply ctels_reply;
+ } reply_data;
+};
+
+
+#endif /* SCSI_BSG_FC_H */
+
diff --git a/include/uapi/scsi/scsi_netlink.h b/include/uapi/scsi/scsi_netlink.h
new file mode 100644
index 0000000..62b4eda
--- /dev/null
+++ b/include/uapi/scsi/scsi_netlink.h
@@ -0,0 +1,123 @@
+/*
+ * SCSI Transport Netlink Interface
+ * Used for the posting of outbound SCSI transport events
+ *
+ * Copyright (C) 2006 James Smart, Emulex Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef SCSI_NETLINK_H
+#define SCSI_NETLINK_H
+
+#include <linux/netlink.h>
+#include <linux/types.h>
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+/* Single Netlink Message type to send all SCSI Transport messages */
+#define SCSI_TRANSPORT_MSG NLMSG_MIN_TYPE + 1
+
+/* SCSI Transport Broadcast Groups */
+ /* leaving groups 0 and 1 unassigned */
+#define SCSI_NL_GRP_FC_EVENTS (1<<2) /* Group 2 */
+#define SCSI_NL_GRP_CNT 3
+
+
+/* SCSI_TRANSPORT_MSG event message header */
+struct scsi_nl_hdr {
+ uint8_t version;
+ uint8_t transport;
+ uint16_t magic;
+ uint16_t msgtype;
+ uint16_t msglen;
+} __attribute__((aligned(sizeof(uint64_t))));
+
+/* scsi_nl_hdr->version value */
+#define SCSI_NL_VERSION 1
+
+/* scsi_nl_hdr->magic value */
+#define SCSI_NL_MAGIC 0xA1B2
+
+/* scsi_nl_hdr->transport value */
+#define SCSI_NL_TRANSPORT 0
+#define SCSI_NL_TRANSPORT_FC 1
+#define SCSI_NL_MAX_TRANSPORTS 2
+
+/* Transport-based scsi_nl_hdr->msgtype values are defined in each transport */
+
+/*
+ * GENERIC SCSI scsi_nl_hdr->msgtype Values
+ */
+ /* kernel -> user */
+#define SCSI_NL_SHOST_VENDOR 0x0001
+ /* user -> kernel */
+/* SCSI_NL_SHOST_VENDOR msgtype is kernel->user and user->kernel */
+
+
+/*
+ * Message Structures :
+ */
+
+/* macro to round up message lengths to 8byte boundary */
+#define SCSI_NL_MSGALIGN(len) (((len) + 7) & ~7)
+
+
+/*
+ * SCSI HOST Vendor Unique messages :
+ * SCSI_NL_SHOST_VENDOR
+ *
+ * Note: The Vendor Unique message payload will begin directly after
+ * this structure, with the length of the payload per vmsg_datalen.
+ *
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ * formatting requirements specified below
+ */
+struct scsi_nl_host_vendor_msg {
+ struct scsi_nl_hdr snlh; /* must be 1st element ! */
+ uint64_t vendor_id;
+ uint16_t host_no;
+ uint16_t vmsg_datalen;
+} __attribute__((aligned(sizeof(uint64_t))));
+
+
+/*
+ * Vendor ID:
+ * If transports post vendor-unique events, they must pass a well-known
+ * 32-bit vendor identifier. This identifier consists of 8 bits indicating
+ * the "type" of identifier contained, and 24 bits of id data.
+ *
+ * Identifiers for each type:
+ * PCI : ID data is the 16 bit PCI Registered Vendor ID
+ */
+#define SCSI_NL_VID_TYPE_SHIFT 56
+#define SCSI_NL_VID_TYPE_MASK ((__u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
+#define SCSI_NL_VID_TYPE_PCI ((__u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
+#define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK)
+
+
+#define INIT_SCSI_NL_HDR(hdr, t, mtype, mlen) \
+ { \
+ (hdr)->version = SCSI_NL_VERSION; \
+ (hdr)->transport = t; \
+ (hdr)->magic = SCSI_NL_MAGIC; \
+ (hdr)->msgtype = mtype; \
+ (hdr)->msglen = mlen; \
+ }
+
+#endif /* SCSI_NETLINK_H */
+
diff --git a/include/uapi/scsi/scsi_netlink_fc.h b/include/uapi/scsi/scsi_netlink_fc.h
new file mode 100644
index 0000000..cbf76e4
--- /dev/null
+++ b/include/uapi/scsi/scsi_netlink_fc.h
@@ -0,0 +1,71 @@
+/*
+ * FC Transport Netlink Interface
+ *
+ * Copyright (C) 2006 James Smart, Emulex Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef SCSI_NETLINK_FC_H
+#define SCSI_NETLINK_FC_H
+
+#include <scsi/scsi_netlink.h>
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+/*
+ * FC Transport Message Types
+ */
+ /* kernel -> user */
+#define FC_NL_ASYNC_EVENT 0x0100
+ /* user -> kernel */
+/* none */
+
+
+/*
+ * Message Structures :
+ */
+
+/* macro to round up message lengths to 8byte boundary */
+#define FC_NL_MSGALIGN(len) (((len) + 7) & ~7)
+
+
+/*
+ * FC Transport Broadcast Event Message :
+ * FC_NL_ASYNC_EVENT
+ *
+ * Note: if Vendor Unique message, &event_data will be start of
+ * vendor unique payload, and the length of the payload is
+ * per event_datalen
+ *
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ * formatting requirements specified in scsi_netlink.h
+ */
+struct fc_nl_event {
+ struct scsi_nl_hdr snlh; /* must be 1st element ! */
+ uint64_t seconds;
+ uint64_t vendor_id;
+ uint16_t host_no;
+ uint16_t event_datalen;
+ uint32_t event_num;
+ uint32_t event_code;
+ uint32_t event_data;
+} __attribute__((aligned(sizeof(uint64_t))));
+
+
+#endif /* SCSI_NETLINK_FC_H */
+